Source code for the Trusted Boot Module.
Ви не можете вибрати більше 25 тем Теми мають розпочинатися з літери або цифри, можуть містити дефіси (-) і не повинні перевищувати 35 символів.
 
 
 
S.J.R. van Schaik 8723a6e78d make: disable LTO as it discards the ISRs 5 роки тому
include stm32f1: jtag: add command to enable/disable JTAG 5 роки тому
libopencm3@0fd4f74ee3 opencm3: update to 2019-02-15 5 роки тому
scripts make: disable LTO as it discards the ISRs 5 роки тому
source stm32f1: jtag: add command to enable/disable JTAG 5 роки тому
support make: stm32f1: update linker script path 5 роки тому
.gitmodules submodule: add libopencm3 7 роки тому
Makefile make: disable LTO as it discards the ISRs 5 роки тому
README readme: initial version 7 роки тому
flash.scr tbm: initial commit 7 роки тому

README

Prerequisites
=============

A cross-compiler targetting ARMv6 or ARMv7-M such as the GNU ARM Embedded Toolchain is required to build the source code for the Trusted Boot Module.
Either install it using your package manager or download the toolchain from https://developer.arm.com/open-source/gnu-toolchain/gnu-rm.
For Gentoo users, an ebuild is available in the tbm-overlay repository.
Building your own cross-compiler using a tool like crossdev can be quite tricky, and is therefore discouraged.

To build the source code in this repository, you will also need libopencm3.
Download the source code for libopencm3 and build it as follows:

git submodule init
git submodule update
make -C libopencm3

Supported targets
=================

The targets that are currently supported are:

* A simulation compatible with your host device (not up-to-date; requires an older git revision): TARGET=host make
* STM32F0 Discovery board: TARGET=stm32f0 make
* Trusted Boot Module (rev. 1): TARGET=stm32f1 make

Building
========

To build the code for the Trusted Boot Module, run:

TARGET=stm32f1 make

Flashing and Debugging
======================

In case of the STM32F0 Discovery board, simply connect the device using a USB cable. In case of the TBM, connect the device using SWD.
Then run the following as root:

TARGET=stm32f1 make openocd

To flash and run the program, issue the following command:

TARGET=stm32f1 make run