upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/bf533-ezkit/bf533-ezkit.c

61 lines
1.8 KiB

/*
* U-boot - main board file
*
* Copyright (c) 2005-2008 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <common.h>
#include <netdev.h>
#include "psd4256.h"
#include "flash-defines.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
printf("Board: ADI BF533 EZ-Kit Lite board\n");
printf(" Support: http://blackfin.uclinux.org/\n");
return 0;
}
/* miscellaneous platform dependent initialisations */
int misc_init_r(void)
{
/* Set direction bits for Video en/decoder reset as output */
*(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DIR) =
PSDA_VDEC_RST | PSDA_VENC_RST;
/* Deactivate Video en/decoder reset lines */
*(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DOUT) =
PSDA_VDEC_RST | PSDA_VENC_RST;
return 0;
}
#ifdef CONFIG_SMC91111
int board_eth_init(bd_t *bis)
{
return smc91111_initialize(0, CONFIG_SMC91111_BASE);
}
#endif