upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/doc/README.JFFS2_NAND

25 lines
891 B

JFFS2 NAND support:
To ebable, use the following #define in the board configuration file:
#define CONFIG_JFFS2_NAND 1
Configuration of partitions is similar to how this is done in U-Boot
for JFFS2 on top NOR flash. If a single parition is used, it can be
configured using the following #defines in the configuration file:
#define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */
#define CONFIG_JFFS2_NAND_OFF 0 /* start of jffs2 partition */
#define CONFIG_JFFS2_NAND_SIZE 2*1024*1024 /* size of jffs2 partition */
If more than a single partition is desired, the user can define a
CONFIG_SYS_JFFS_CUSTOM_PART macro and implement a
struct part_info* jffs2_part_info(int part_num)
function in a board-specific module. An example of such function is
available in common/cmd_jffs2.c
The default configuration for the DAVE board has a single JFFS2
partition of 2 MB size.