upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/compulab/cm_t54/mux.c

95 lines
2.9 KiB

/*
* Pinmux configuration for Compulab CM-T54 board
*
* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
*
* Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CM_T54_MUX_DATA_H
#define _CM_T54_MUX_DATA_H
#include <asm/arch/mux_omap5.h>
#include <asm/arch/sys_proto.h>
const struct pad_conf_entry core_padconf_array_essential[] = {
/* MMC1 - SD CARD */
{SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */
{SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */
{SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0 */
{SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1 */
{SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2 */
{SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3 */
/* SD CARD CD and WP GPIOs*/
{TIMER5_PWM_EVT, (PTU | IEN | M6)}, /* GPIO8_228 */
{TIMER6_PWM_EVT, (PTU | IEN | M6)}, /* GPIO8_229 */
/* MMC2 - eMMC */
{EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */
{EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */
{EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */
{EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */
{EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */
{EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */
{EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */
{EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */
{EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */
{EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */
/* UART4 */
{I2C5_SCL, (PTU | IEN | M2)}, /* UART4_RX */
{I2C5_SDA, (M2)}, /* UART4_TX */
/* Led */
{HSI2_CAFLAG, (PTU | M6)}, /* GPIO3_80 */
/* I2C1 */
{I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */
{I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */
/* USBB2, USBB3 */
{USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */
{USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */
{USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE */
{USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */
/* USB Hub and USB Eth reset GPIOs */
{HSI2_CAREADY, (PTD | M6)}, /* GPIO3_76 */
{HSI2_ACDATA, (PTD | M6)}, /* GPIO3_83 */
/* I2C4 */
{I2C4_SCL, (PTU | IEN | M0)}, /* I2C4_SCL */
{I2C4_SDA, (PTU | IEN | M0)}, /* I2C4_SDA */
};
const struct pad_conf_entry wkup_padconf_array_essential[] = {
{SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */
{SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */
{SYS_32K, (IEN | M0)}, /* SYS_32K */
/* USB Hub clock */
{FREF_CLK1_OUT, (PTD | IEN | M0)}, /* FREF_CLK1_OUT */
};
/*
* Routine: set_muxconf_regs_essential
* Description: setup board pinmux configuration.
*/
void set_muxconf_regs_essential(void)
{
do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
}
#endif /* _CM_T54_MUX_DATA_H */