upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/cmd/reiser.c

172 lines
3.7 KiB

/*
* (C) Copyright 2003 - 2004
* Sysgo Real-Time Solutions, AG <www.elinos.com>
* Pavel Bartusek <pba@sysgo.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Reiserfs support
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <image.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <reiserfs.h>
#include <part.h>
#ifndef CONFIG_DOS_PARTITION
#error DOS partition support must be selected
#endif
/* #define REISER_DEBUG */
#ifdef REISER_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *filename = "/";
int dev, part;
block_dev_desc_t *dev_desc=NULL;
disk_partition_t info;
if (argc < 3)
return CMD_RET_USAGE;
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years ago
part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
if (part < 0)
return 1;
if (argc == 4) {
filename = argv[3];
}
dev = dev_desc->dev;
PRINTF("Using device %s %d:%d, directory: %s\n", argv[1], dev, part, filename);
reiserfs_set_blk_dev(dev_desc, &info);
if (!reiserfs_mount(info.size)) {
printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
if (reiserfs_ls (filename)) {
printf ("** Error reiserfs_ls() **\n");
return 1;
};
return 0;
}
U_BOOT_CMD(
reiserls, 4, 1, do_reiserls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
" - list files from 'dev' on 'interface' in a 'directory'"
);
/******************************************************************************
* Reiserfs boot command intepreter. Derived from diskboot
*/
int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *filename = NULL;
int dev, part;
ulong addr = 0, filelen;
disk_partition_t info;
block_dev_desc_t *dev_desc = NULL;
unsigned long count;
char *addr_str;
switch (argc) {
case 3:
addr_str = getenv("loadaddr");
if (addr_str != NULL) {
addr = simple_strtoul (addr_str, NULL, 16);
} else {
addr = CONFIG_SYS_LOAD_ADDR;
}
filename = getenv ("bootfile");
count = 0;
break;
case 4:
addr = simple_strtoul (argv[3], NULL, 16);
filename = getenv ("bootfile");
count = 0;
break;
case 5:
addr = simple_strtoul (argv[3], NULL, 16);
filename = argv[4];
count = 0;
break;
case 6:
addr = simple_strtoul (argv[3], NULL, 16);
filename = argv[4];
count = simple_strtoul (argv[5], NULL, 16);
break;
default:
return CMD_RET_USAGE;
}
if (!filename) {
puts ("\n** No boot file defined **\n");
return 1;
}
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years ago
part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
if (part < 0)
return 1;
dev = dev_desc->dev;
printf("Loading file \"%s\" from %s device %d%c%c\n",
filename, argv[1], dev,
part ? ':' : ' ', part ? part + '0' : ' ');
reiserfs_set_blk_dev(dev_desc, &info);
if (!reiserfs_mount(info.size)) {
printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
filelen = reiserfs_open(filename);
if (filelen < 0) {
printf("** File not found %s **\n", filename);
return 1;
}
if ((count < filelen) && (count != 0)) {
filelen = count;
}
if (reiserfs_read((char *)addr, filelen) != filelen) {
printf("\n** Unable to read \"%s\" from %s %d:%d **\n", filename, argv[1], dev, part);
return 1;
}
/* Loading ok, update default load address */
load_addr = addr;
printf ("\n%ld bytes read\n", filelen);
setenv_hex("filesize", filelen);
return filelen;
}
U_BOOT_CMD(
reiserload, 6, 0, do_reiserload,
"load binary file from a Reiser filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
" to address 'addr' from dos filesystem"
);