upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/dave/common/pci.c

203 lines
6.1 KiB

/*
* (C) Copyright 2001
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/ppc4xx.h>
#include <asm/processor.h>
#include <pci.h>
u_long pci9054_iobase;
#define PCI_PRIMARY_CAR (0x500000dc) /* PCI config address reg */
#define PCI_PRIMARY_CDR (0x80000000) /* PCI config data reg */
/*-----------------------------------------------------------------------------+
| Subroutine: pci9054_read_config_dword
| Description: Read a PCI configuration register
| Inputs:
| hose PCI Controller
| dev PCI Bus+Device+Function number
| offset Configuration register number
| value Address of the configuration register value
| Return value:
| 0 Successful
+-----------------------------------------------------------------------------*/
int pci9054_read_config_dword(struct pci_controller *hose,
pci_dev_t dev, int offset, u32* value)
{
unsigned long conAdrVal;
unsigned long val;
/* generate coded value for CON_ADR register */
conAdrVal = dev | (offset & 0xfc) | 0x80000000;
/* Load the CON_ADR (CAR) value first, then read from CON_DATA (CDR) */
*(unsigned long *)PCI_PRIMARY_CAR = conAdrVal;
/* Note: *pResult comes back as -1 if machine check happened */
val = in32r(PCI_PRIMARY_CDR);
*value = (unsigned long) val;
out32r(PCI_PRIMARY_CAR, 0);
if ((*(unsigned long *)0x50000304) & 0x60000000)
{
/* clear pci master/target abort bits */
*(unsigned long *)0x50000304 = *(unsigned long *)0x50000304;
}
return 0;
}
/*-----------------------------------------------------------------------------+
| Subroutine: pci9054_write_config_dword
| Description: Write a PCI configuration register.
| Inputs:
| hose PCI Controller
| dev PCI Bus+Device+Function number
| offset Configuration register number
| Value Configuration register value
| Return value:
| 0 Successful
| Updated for pass2 errata #6. Need to disable interrupts and clear the
| PCICFGADR reg after writing the PCICFGDATA reg.
+-----------------------------------------------------------------------------*/
int pci9054_write_config_dword(struct pci_controller *hose,
pci_dev_t dev, int offset, u32 value)
{
unsigned long conAdrVal;
conAdrVal = dev | (offset & 0xfc) | 0x80000000;
*(unsigned long *)PCI_PRIMARY_CAR = conAdrVal;
out32r(PCI_PRIMARY_CDR, value);
out32r(PCI_PRIMARY_CAR, 0);
/* clear pci master/target abort bits */
*(unsigned long *)0x50000304 = *(unsigned long *)0x50000304;
return (0);
}
/*-----------------------------------------------------------------------
*/
#ifdef CONFIG_DASA_SIM
static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t dev,
struct pci_config_table *_)
{
unsigned int iobase;
unsigned short status = 0;
unsigned char timer;
/*
* Configure PLX PCI9054
*/
pci_read_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, &status);
status |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
pci_write_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, status);
/* Check the latency timer for values >= 0x60.
*/
pci_read_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
if (timer < 0x60)
{
pci_write_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
}
/* Set I/O base register.
*/
pci_write_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CONFIG_SYS_PCI9054_IOBASE);
pci_read_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
pci9054_iobase = pci_mem_to_phys(CONFIG_SYS_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
if (pci9054_iobase == 0xffffffff)
{
printf("Error: Can not set I/O base register.\n");
return;
}
}
#endif
static struct pci_config_table pci9054_config_table[] = {
#ifndef CONFIG_PCI_PNP
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_BUS(CONFIG_SYS_ETH_DEV_FN), PCI_DEV(CONFIG_SYS_ETH_DEV_FN), PCI_FUNC(CONFIG_SYS_ETH_DEV_FN),
pci_cfgfunc_config_device, { CONFIG_SYS_ETH_IOBASE,
CONFIG_SYS_ETH_IOBASE,
PCI_COMMAND_IO | PCI_COMMAND_MASTER }},
#ifdef CONFIG_DASA_SIM
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_BUS(CONFIG_SYS_PCI9054_DEV_FN), PCI_DEV(CONFIG_SYS_PCI9054_DEV_FN), PCI_FUNC(CONFIG_SYS_PCI9054_DEV_FN),
pci_dasa_sim_config_pci9054 },
#endif
#endif
{ }
};
static struct pci_controller pci9054_hose = {
config_table: pci9054_config_table,
};
void pci_init(void)
{
struct pci_controller *hose = &pci9054_hose;
/*
* Register the hose
*/
hose->first_busno = 0;
hose->last_busno = 0xff;
/* System memory space */
pci_set_region(hose->regions + 0,
0x00000000, 0x00000000, 0x01000000,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
/* PCI Memory space */
pci_set_region(hose->regions + 1,
0x00000000, 0xc0000000, 0x10000000,
PCI_REGION_MEM);
pci_set_ops(hose,
pci_hose_read_config_byte_via_dword,
pci_hose_read_config_word_via_dword,
pci9054_read_config_dword,
pci_hose_write_config_byte_via_dword,
pci_hose_write_config_word_via_dword,
pci9054_write_config_dword);
hose->region_count = 2;
pci_register_hose(hose);
hose->last_busno = pci_hose_scan(hose);
}