upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/arch/m68k/cpu/mcf547x_8x/cpu_init.c

146 lines
3.8 KiB

/*
*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <MCD_dma.h>
#include <asm/immap.h>
#include <asm/io.h>
#if defined(CONFIG_CMD_NET)
#include <config.h>
#include <net.h>
#include <asm/fsl_mcdmafec.h>
#endif
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
xlbarb_t *xlbarb = (xlbarb_t *) MMAP_XARB;
out_be32(&xlbarb->adrto, 0x2000);
out_be32(&xlbarb->datto, 0x2500);
out_be32(&xlbarb->busto, 0x3000);
out_be32(&xlbarb->cfg, XARB_CFG_AT | XARB_CFG_DT);
/* Master Priority Enable */
out_be32(&xlbarb->prien, 0xff);
out_be32(&xlbarb->pri, 0);
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK);
#endif
#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE);
out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL);
out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK);
#endif
#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE);
out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL);
out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK);
#endif
#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE);
out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL);
out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK);
#endif
#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
#endif
#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
#endif
#ifdef CONFIG_SYS_I2C_FSL
out_be16(&gpio->par_feci2cirq,
GPIO_PAR_FECI2CIRQ_SCL | GPIO_PAR_FECI2CIRQ_SDA);
#endif
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
#if defined(CONFIG_CMD_NET) && defined(CONFIG_FSLDMAFEC)
MCD_initDma((dmaRegs *) (MMAP_MCDMA), (void *)(MMAP_SRAM + 512),
MCD_RELOC_TASKS);
#endif
return (0);
}
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40);
/* Setup Ports: */
switch (port) {
case 0:
out_8(&gpio->par_psc0, GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0);
break;
case 1:
out_8(&gpio->par_psc1, GPIO_PAR_PSC1_TXD1 | GPIO_PAR_PSC1_RXD1);
break;
case 2:
out_8(&gpio->par_psc2, GPIO_PAR_PSC2_TXD2 | GPIO_PAR_PSC2_RXD2);
break;
case 3:
out_8(&gpio->par_psc3, GPIO_PAR_PSC3_TXD3 | GPIO_PAR_PSC3_RXD3);
break;
}
clrbits_8(pscsicr, 0x07);
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(struct eth_device *dev, int setclear)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
if (setclear) {
if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
setbits_be16(&gpio->par_feci2cirq, 0xf000);
else
setbits_be16(&gpio->par_feci2cirq, 0x0fc0);
} else {
if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
clrbits_be16(&gpio->par_feci2cirq, 0xf000);
else
clrbits_be16(&gpio->par_feci2cirq, 0x0fc0);
}
return 0;
}
#endif