upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/doc/device-tree-bindings/i2c/i2c-stm32.txt

31 lines
984 B

* I2C controller embedded in STMicroelectronis STM32 platforms
Required properties :
- compatible : Must be "st,stm32f7-i2c"
- reg : Offset and length of the register set for the device
- resets: Must contain the phandle to the reset controller
- clocks: Must contain the input clock of the I2C instance
- A pinctrl state named "default" must be defined to set pins in mode of
operation for I2C transfer
- #address-cells = <1>;
- #size-cells = <0>;
Optional properties :
- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
the default 100 kHz frequency will be used. As only Normal, Fast and Fast+
modes are implemented, possible values are 100000, 400000 and 1000000.
Example :
i2c1: i2c@40005400 {
compatible = "st,stm32f7-i2c";
reg = <0x40005400 0x400>;
resets = <&rcc 181>;
clocks = <&clk_pclk1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
};