upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/doc/device-tree-bindings/leds/leds-bcm6358.txt

142 lines
2.8 KiB

LEDs connected to Broadcom BCM6358 controller
This controller is present on BCM6358 and BCM6368.
In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
which can either be controlled by software (exporting the 74x164 as spi-gpio.
See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
by hardware using this driver.
Required properties:
- compatible : should be "brcm,bcm6358-leds".
- #address-cells : must be 1.
- #size-cells : must be 0.
- reg : BCM6358 LED controller address and size.
Optional properties:
- brcm,clk-div : SCK signal divider. Possible values are 1, 2, 4 and 8.
Default : 1
- brcm,clk-dat-low : Boolean, makes clock and data signals active low.
Default : false
Each LED is represented as a sub-node of the brcm,bcm6358-leds device.
LED sub-node required properties:
- reg : LED pin number (only LEDs 0 to 31 are valid).
LED sub-node optional properties:
- label : see Documentation/devicetree/bindings/leds/common.txt
- active-low : Boolean, makes LED active low.
Default : false
Examples:
Scenario 1 : BCM6358
leds0: led-controller@fffe00d0 {
compatible = "brcm,bcm6358-leds";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfffe00d0 0x8>;
alarm_white {
reg = <0>;
active-low;
label = "white:alarm";
};
tv_white {
reg = <2>;
active-low;
label = "white:tv";
};
tel_white {
reg = <3>;
active-low;
label = "white:tel";
};
adsl_white {
reg = <4>;
active-low;
label = "white:adsl";
};
};
Scenario 2 : BCM6368
leds0: led-controller@100000d0 {
compatible = "brcm,bcm6358-leds";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x100000d0 0x8>;
brcm,pol-low;
brcm,clk-div = <4>;
power_red {
reg = <0>;
active-low;
label = "red:power";
};
power_green {
reg = <1>;
active-low;
label = "green:power";
default-state = "on";
};
power_blue {
reg = <2>;
label = "blue:power";
};
broadband_red {
reg = <3>;
active-low;
label = "red:broadband";
};
broadband_green {
reg = <4>;
label = "green:broadband";
};
broadband_blue {
reg = <5>;
active-low;
label = "blue:broadband";
};
wireless_red {
reg = <6>;
active-low;
label = "red:wireless";
};
wireless_green {
reg = <7>;
active-low;
label = "green:wireless";
};
wireless_blue {
reg = <8>;
label = "blue:wireless";
};
phone_red {
reg = <9>;
active-low;
label = "red:phone";
};
phone_green {
reg = <10>;
active-low;
label = "green:phone";
};
phone_blue {
reg = <11>;
label = "blue:phone";
};
upgrading_red {
reg = <12>;
active-low;
label = "red:upgrading";
};
upgrading_green {
reg = <13>;
active-low;
label = "green:upgrading";
};
upgrading_blue {
reg = <14>;
label = "blue:upgrading";
};
};