upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/amirix/ap1000/pci.c

319 lines
10 KiB

/*
* (C) Copyright 2003
* AMIRIX Systems Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
#include <pci.h>
#define PCI_MEM_82559ER_CSR_BASE 0x30200000
#define PCI_IO_82559ER_CSR_BASE 0x40000200
/** AP1100 specific values */
#define PSII_BASE 0x30000000 /**< PowerSpan II dual bridge local bus register address */
#define PSII_CONFIG_ADDR 0x30000290 /**< PowerSpan II Configuration Cycle Address configuration register */
#define PSII_CONFIG_DATA 0x30000294 /**< PowerSpan II Configuration Cycle Data register. */
#define PSII_CONFIG_DEST_PCI2 0x01000000 /**< PowerSpan II configuration cycle destination selection, set for PCI2 bus */
#define PSII_PCI_MEM_BASE 0x30200000 /**< Local Bus address for start of PCI memory space on PCI2 bus. */
#define PSII_PCI_MEM_SIZE 0x1BE00000 /**< PCI Memory space about 510 Meg. */
#define AP1000_SYS_MEM_START 0x00000000 /**< System memory starts at 0. */
#define AP1000_SYS_MEM_SIZE 0x08000000 /**< System memory is 128 Meg. */
/* static int G_verbosity_level = 1; */
#define G_verbosity_level 1
void write1 (unsigned long addr, unsigned char val)
{
volatile unsigned char *p = (volatile unsigned char *) addr;
if (G_verbosity_level > 1)
printf ("write1: addr=%08x val=%02x\n", (unsigned int) addr,
val);
*p = val;
asm ("eieio");
}
unsigned char read1 (unsigned long addr)
{
unsigned char val;
volatile unsigned char *p = (volatile unsigned char *) addr;
if (G_verbosity_level > 1)
printf ("read1: addr=%08x ", (unsigned int) addr);
val = *p;
asm ("eieio");
if (G_verbosity_level > 1)
printf ("val=%08x\n", val);
return val;
}
void write2 (unsigned long addr, unsigned short val)
{
volatile unsigned short *p = (volatile unsigned short *) addr;
if (G_verbosity_level > 1)
printf ("write2: addr=%08x val=%04x -> *p=%04x\n",
(unsigned int) addr, val,
((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8));
*p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
asm ("eieio");
}
unsigned short read2 (unsigned long addr)
{
unsigned short val;
volatile unsigned short *p = (volatile unsigned short *) addr;
if (G_verbosity_level > 1)
printf ("read2: addr=%08x ", (unsigned int) addr);
val = *p;
val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
asm ("eieio");
if (G_verbosity_level > 1)
printf ("*p=%04x -> val=%04x\n",
((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8), val);
return val;
}
void write4 (unsigned long addr, unsigned long val)
{
volatile unsigned long *p = (volatile unsigned long *) addr;
if (G_verbosity_level > 1)
printf ("write4: addr=%08x val=%08x -> *p=%08x\n",
(unsigned int) addr, (unsigned int) val,
(unsigned int) (((val & 0xFF000000) >> 24) |
((val & 0x000000FF) << 24) |
((val & 0x00FF0000) >> 8) |
((val & 0x0000FF00) << 8)));
*p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8);
asm ("eieio");
}
unsigned long read4 (unsigned long addr)
{
unsigned long val;
volatile unsigned long *p = (volatile unsigned long *) addr;
if (G_verbosity_level > 1)
printf ("read4: addr=%08x", (unsigned int) addr);
val = *p;
val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8);
asm ("eieio");
if (G_verbosity_level > 1)
printf ("*p=%04x -> val=%04x\n",
(unsigned int) (((val & 0xFF000000) >> 24) |
((val & 0x000000FF) << 24) |
((val & 0x00FF0000) >> 8) |
((val & 0x0000FF00) << 8)),
(unsigned int) val);
return val;
}
void write4be (unsigned long addr, unsigned long val)
{
volatile unsigned long *p = (volatile unsigned long *) addr;
if (G_verbosity_level > 1)
printf ("write4: addr=%08x val=%08x\n", (unsigned int) addr,
(unsigned int) val);
*p = val;
asm ("eieio");
}
/** One byte configuration write on PSII.
* Currently fixes destination PCI bus to PCI2, onboard
* pci.
* @param hose PCI Host controller information. Ignored.
* @param dev Encoded PCI device/Bus and Function value.
* @param reg PCI Configuration register number.
* @param val Address of location for received byte.
* @return Always Zero.
*/
static int psII_read_config_byte (struct pci_controller *hose,
pci_dev_t dev, int reg, u8 * val)
{
write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */
(PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */
*val = read1 (PSII_CONFIG_DATA + (reg & 0x03));
return (0);
}
/** One byte configuration write on PSII.
* Currently fixes destination bus to PCI2, onboard
* pci.
* @param hose PCI Host controller information. Ignored.
* @param dev Encoded PCI device/Bus and Function value.
* @param reg PCI Configuration register number.
* @param val Output byte.
* @return Always Zero.
*/
static int psII_write_config_byte (struct pci_controller *hose,
pci_dev_t dev, int reg, u8 val)
{
write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */
(PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */
write1 (PSII_CONFIG_DATA + (reg & 0x03), (unsigned char) val);
return (0);
}
/** One word (16 bit) configuration read on PSII.
* Currently fixes destination PCI bus to PCI2, onboard
* pci.
* @param hose PCI Host controller information. Ignored.
* @param dev Encoded PCI device/Bus and Function value.
* @param reg PCI Configuration register number.
* @param val Address of location for received word.
* @return Always Zero.
*/
static int psII_read_config_word (struct pci_controller *hose,
pci_dev_t dev, int reg, u16 * val)
{
write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */
(PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */
*val = read2 (PSII_CONFIG_DATA + (reg & 0x03));
return (0);
}
/** One word (16 bit) configuration write on PSII.
* Currently fixes destination bus to PCI2, onboard
* pci.
* @param hose PCI Host controller information. Ignored.
* @param dev Encoded PCI device/Bus and Function value.
* @param reg PCI Configuration register number.
* @param val Output word.
* @return Always Zero.
*/
static int psII_write_config_word (struct pci_controller *hose,
pci_dev_t dev, int reg, u16 val)
{
write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */
(PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */
write2 (PSII_CONFIG_DATA + (reg & 0x03), (unsigned short) val);
return (0);
}
/** One DWord (32 bit) configuration read on PSII.
* Currently fixes destination PCI bus to PCI2, onboard
* pci.
* @param hose PCI Host controller information. Ignored.
* @param dev Encoded PCI device/Bus and Function value.
* @param reg PCI Configuration register number.
* @param val Address of location for received byte.
* @return Always Zero.
*/
static int psII_read_config_dword (struct pci_controller *hose,
pci_dev_t dev, int reg, u32 * val)
{
write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */
(PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */
*val = read4 (PSII_CONFIG_DATA);
return (0);
}
/** One DWord (32 bit) configuration write on PSII.
* Currently fixes destination bus to PCI2, onboard
* pci.
* @param hose PCI Host controller information. Ignored.
* @param dev Encoded PCI device/Bus and Function value.
* @param reg PCI Configuration register number.
* @param val Output Dword.
* @return Always Zero.
*/
static int psII_write_config_dword (struct pci_controller *hose,
pci_dev_t dev, int reg, u32 val)
{
write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 | /* Operate on PCI2 bus interface . */
(PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3)); /* Configuation cycle type 0 */
write4 (PSII_CONFIG_DATA, (unsigned long) val);
return (0);
}
static struct pci_config_table ap1000_config_table[] = {
#ifdef CONFIG_AP1000
{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_BUS (CFG_ETH_DEV_FN), PCI_DEV (CFG_ETH_DEV_FN),
PCI_FUNC (CFG_ETH_DEV_FN),
pci_cfgfunc_config_device,
{CFG_ETH_IOBASE, CFG_ETH_MEMBASE,
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
#endif
{}
};
static struct pci_controller psII_hose = {
config_table:ap1000_config_table,
};
void pci_init_board (void)
{
struct pci_controller *hose = &psII_hose;
/*
* Register the hose
*/
hose->first_busno = 0;
hose->last_busno = 0xff;
/* System memory space */
pci_set_region (hose->regions + 0,
AP1000_SYS_MEM_START, AP1000_SYS_MEM_START,
AP1000_SYS_MEM_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* PCI Memory space */
pci_set_region (hose->regions + 1,
PSII_PCI_MEM_BASE, PSII_PCI_MEM_BASE,
PSII_PCI_MEM_SIZE, PCI_REGION_MEM);
/* No IO Memory space - for now */
pci_set_ops (hose,
psII_read_config_byte,
psII_read_config_word,
psII_read_config_dword,
psII_write_config_byte,
psII_write_config_word, psII_write_config_dword);
hose->region_count = 2;
pci_register_hose (hose);
hose->last_busno = pci_hose_scan (hose);
}