Your ROOT_URL in app.ini is https://src.whiteboxsystems.nl/ but you are visiting http://src.whiteboxsystems.nl/Whitebox/u-boot/blame/commit/4fcd0b33c7a0db2e86cccdc1831db235a6bc1b2d/include/ide.h You should set ROOT_URL correctly, otherwise the web may not work correctly.
Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
34451 Commits
3 Branches
0 Tags
148 MiB
u-boot/include/ide.h

88 lines
2.1 KiB
Raw Normal View History Unescape

Initial revision
23 years ago
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
12 years ago
* SPDX-License-Identifier: GPL-2.0+
Initial revision
23 years ago
*/
#ifndef _IDE_H
#define _IDE_H
ide: Correct IDE_BUS(dev) macro The IDE_BUS(dev) macro was previously doing dev >> 1. This however is a mis-match of the usage in common/cmd_ide.c and would cause boards with multiple ports / devices to not correctly detect all devices. For more details please see: http://lists.denx.de/pipermail/u-boot/2012-April/122525.html [Tom Rini: Reword commit message only] Tested-by: Luka Perkov <uboot@lukaperkov.net> Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Tom Rini <trini@ti.com>
13 years ago
#define IDE_BUS(dev) (dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS))
Initial revision
23 years ago
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17 years ago
#define ATA_CURR_BASE(dev) (CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
change all versions of input_data() and output_data() to global weak aliases This changes input_data() and friends from static function to global symbols under weak alias, to enable board specific overrides (and therefore get rid of board-specific code in cmd_ide.c) Also declare ide_bus_offset in the header file, so other files can use ATA_CURR_BASE as well. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
13 years ago
extern ulong ide_bus_offset[];
IDE: - make ide_inb () and ide_outb () "weak", so boards can define there own I/O functions. (Needed for the pcs440ep board). - The default I/O Functions are again 8 Bit accesses. - Added CONFIG_CMD_IDE for the pcs440ep Board. Signed-off-by: Heiko Schocher <hs@denx.de>
18 years ago
Initial revision
23 years ago
#ifdef CONFIG_IDE_LED
/*
* LED Port
*/
#define LED_PORT ((uchar *)(PER8_BASE + 0x3000))
#define LED_IDE1 0x01
#define LED_IDE2 0x02
#define DEVICE_LED(d) ((d & 2) | ((d & 2) == 0)) /* depends on bit positions! */
ide: add missing prototype Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
11 years ago
void ide_led(uchar led, uchar status);
Initial revision
23 years ago
#endif /* CONFIG_IDE_LED */
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17 years ago
#ifdef CONFIG_SYS_64BIT_LBA
* Patch by Rune Torgersen, 27 Feb 2004: - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA) - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF) - Added support for 64bit strtoul (CFG_64BIT_STRTOUL) * Patch by Masami Komiya, 27 Feb 2004: Fix rarpboot: add autoload by NFS * Patch by Dan Eisenhut, 26 Feb 2004: fix flash_write return value in saveenv * Patch by Stephan Linz, 11 Dec 2003 expand config.mk to avoid trigraph warnings on NIOS * Rename "BMS2003" board into "HMI10"
21 years ago
typedef uint64_t lbaint_t;
ide: Add printf format string for CONFIG_SYS_64BIT_LBA option The size of an LBA type changes depending on this option. We need to use a different printf() string in each case, so create a define for this. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
13 years ago
#define LBAF "%llx"
Fix ext2/ext4 filesystem accesses beyond 2TiB With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type, which is required to represent block numbers for storage devices that exceed 2TiB (the block size usually is 512B), e.g. recent hard drives We now use lbaint_t for partition offset to reflect the lbaint_t change, and access partitions beyond or crossing the 2.1TiB limit. This required changes to signature of ext4fs_devread(), and type of all variables relatives to block sector. ext2/ext4 fs uses logical block represented by a 32 bit value. Logical block is a multiple of device block sector. To avoid overflow problem when calling ext4fs_devread(), we need to cast the sector parameter. Signed-off-by: Frédéric Leroy <fredo@starox.org>
12 years ago
#define LBAFU "%llu"
* Patch by Rune Torgersen, 27 Feb 2004: - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA) - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF) - Added support for 64bit strtoul (CFG_64BIT_STRTOUL) * Patch by Masami Komiya, 27 Feb 2004: Fix rarpboot: add autoload by NFS * Patch by Dan Eisenhut, 26 Feb 2004: fix flash_write return value in saveenv * Patch by Stephan Linz, 11 Dec 2003 expand config.mk to avoid trigraph warnings on NIOS * Rename "BMS2003" board into "HMI10"
21 years ago
#else
typedef ulong lbaint_t;
ide: Add printf format string for CONFIG_SYS_64BIT_LBA option The size of an LBA type changes depending on this option. We need to use a different printf() string in each case, so create a define for this. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
13 years ago
#define LBAF "%lx"
Fix ext2/ext4 filesystem accesses beyond 2TiB With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type, which is required to represent block numbers for storage devices that exceed 2TiB (the block size usually is 512B), e.g. recent hard drives We now use lbaint_t for partition offset to reflect the lbaint_t change, and access partitions beyond or crossing the 2.1TiB limit. This required changes to signature of ext4fs_devread(), and type of all variables relatives to block sector. ext2/ext4 fs uses logical block represented by a 32 bit value. Logical block is a multiple of device block sector. To avoid overflow problem when calling ext4fs_devread(), we need to cast the sector parameter. Signed-off-by: Frédéric Leroy <fredo@starox.org>
12 years ago
#define LBAFU "%lu"
* Patch by Rune Torgersen, 27 Feb 2004: - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA) - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF) - Added support for 64bit strtoul (CFG_64BIT_STRTOUL) * Patch by Masami Komiya, 27 Feb 2004: Fix rarpboot: add autoload by NFS * Patch by Dan Eisenhut, 26 Feb 2004: fix flash_write return value in saveenv * Patch by Stephan Linz, 11 Dec 2003 expand config.mk to avoid trigraph warnings on NIOS * Rename "BMS2003" board into "HMI10"
21 years ago
#endif
Initial revision
23 years ago
/*
* Function Prototypes
*/
[PATCH 1_4] Merge common get_dev() routines for block devices Each of the filesystem drivers duplicate the get_dev routine. This change merges them into a single function in part.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18 years ago
void ide_init(void);
Fix block device accesses beyond 2TiB With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type, which is required to represent block numbers for storage devices that exceed 2TiB (the block size usually is 512B), e.g. recent hard drives. For some obscure reason, the current U-Boot code uses lbaint_t for the number of blocks to read (a rather optimistic estimation of how RAM sizes will evolve), but not for the starting address. Trying to access blocks beyond the 2TiB boundary will simply wrap around and read a block within the 0..2TiB range. We now use lbaint_t for block start addresses, too. This required changes to all block drivers as the signature of block_read(), block_write() and block_erase() in block_dev_desc_t changed. Signed-off-by: Sascha Silbe <t-uboot@infra-silbe.de>
12 years ago
ulong ide_read(int device, lbaint_t blknr, lbaint_t blkcnt, void *buffer);
ulong ide_write(int device, lbaint_t blknr, lbaint_t blkcnt,
const void *buffer);
Initial revision
23 years ago
split mpc8xx hooks from cmd_ide.c move most of mpc8xx hooks from cmd_ide.c into ide_preinit() and newly created ide_init_postreset() (invoked after calling ide_reset after ide_preinit), some cleanup to make checkpatch happy, enable IDE init hooks in configs of affected boards. confusingly, these hooks are used by more than just mpc8xx-based boards, and therefore are placed in arch/ppc/lib/ note: checkpatch still emits warnings about using volatile Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
13 years ago
#ifdef CONFIG_IDE_PREINIT
int ide_preinit(void);
#endif
#ifdef CONFIG_IDE_INIT_POSTRESET
int ide_init_postreset(void);
#endif
mucmc52, uc101: delete ata@3a00 node, if no CF card is detected U-Boot can detect if an IDE device is present or not. If not, and this new config option is activated, U-Boot removes the ATA node from the DTS before booting Linux, so the Linux IDE driver does not probe the device and crash. This is needed for buggy hardware (uc101) where no pull down resistor is connected to the signal IDE5V_DD7. Signed-off-by: Heiko Schocher <hs@denx.de>
16 years ago
#if defined(CONFIG_OF_IDE_FIXUP)
int ide_device_present(int dev);
#endif
cmd_ide: enhance new feature "CONFIG_IDE_AHB" Although most IDE controller is designed to be connected to PCI bridge, there are still some IDE controller support AHB interface for SoC design. The driver implementation of these IDE-AHB controllers differ from other IDE-PCI controller, some additional registers and commands access is required during CMD/DATA I/O. Hence a configuration "CONFIG_IDE_AHB" in cmd_ide.c is required to be defined to support these kinds of SoC controllers. Such as Faraday's FTIDE020 series and Global Unichip's UINF-0301. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
14 years ago
#if defined(CONFIG_IDE_AHB)
unsigned char ide_read_register(int dev, unsigned int port);
void ide_write_register(int dev, unsigned int port, unsigned char val);
void ide_read_data(int dev, ulong *sect_buf, int words);
block: constify sect_buf argument of ide_write_data Add a const keyword to the sect_buf argument of ide_write_data to fix the following warning: cmd_ide.c: In function '__ide_output_data': cmd_ide.c:548: warning: passing argument 2 of 'ide_write_data' discards qualifiers from pointer target type /devel/u-boot.git/include/ide.h:76: note: expected 'ulong *' but argument is of type 'const ulong *' Also modify the driver-model documentation to match with the new prototype. Compile tested only. Cc: Macpaul Lin <macpaul@andestech.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
12 years ago
void ide_write_data(int dev, const ulong *sect_buf, int words);
cmd_ide: enhance new feature "CONFIG_IDE_AHB" Although most IDE controller is designed to be connected to PCI bridge, there are still some IDE controller support AHB interface for SoC design. The driver implementation of these IDE-AHB controllers differ from other IDE-PCI controller, some additional registers and commands access is required during CMD/DATA I/O. Hence a configuration "CONFIG_IDE_AHB" in cmd_ide.c is required to be defined to support these kinds of SoC controllers. Such as Faraday's FTIDE020 series and Global Unichip's UINF-0301. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
14 years ago
#endif
change all versions of input_data() and output_data() to global weak aliases This changes input_data() and friends from static function to global symbols under weak alias, to enable board specific overrides (and therefore get rid of board-specific code in cmd_ide.c) Also declare ide_bus_offset in the header file, so other files can use ATA_CURR_BASE as well. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
13 years ago
/*
* I/O function overrides
*/
common: cmd_ide: use __weak and add prototypes clang chokes about the concept of having an alias to an always_inlined function. gcc likely just ignores the always inlined since binary sizes are equal before and after this patch. Convert the aliases to weak functions and provide missing prototypes. cc: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
11 years ago
unsigned char ide_inb(int dev, int port);
void ide_outb(int dev, int port, unsigned char val);
change all versions of input_data() and output_data() to global weak aliases This changes input_data() and friends from static function to global symbols under weak alias, to enable board specific overrides (and therefore get rid of board-specific code in cmd_ide.c) Also declare ide_bus_offset in the header file, so other files can use ATA_CURR_BASE as well. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
13 years ago
void ide_input_swap_data(int dev, ulong *sect_buf, int words);
void ide_input_data(int dev, ulong *sect_buf, int words);
void ide_output_data(int dev, const ulong *sect_buf, int words);
void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts);
void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts);
common: cmd_ide: use __weak and add prototypes clang chokes about the concept of having an alias to an always_inlined function. gcc likely just ignores the always inlined since binary sizes are equal before and after this patch. Convert the aliases to weak functions and provide missing prototypes. cc: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
11 years ago
void ide_led(uchar led, uchar status);
Adjust board_r.c for ppc This adds ppc features to the generic post-relocation board init. Signed-off-by: Simon Glass <sjg@chromium.org>
12 years ago
/**
* board_start_ide() - Start up the board IDE interfac
*
* @return 0 if ok
*/
int board_start_ide(void);
Initial revision
23 years ago
#endif /* _IDE_H */