upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/drivers/net/npe/IxEthDBFirewall.c

267 lines
7.9 KiB

/**
* @file IxEthDBFirewall.c
*
* @brief Implementation of the firewall API
*
* @par
* IXP400 SW Release version 2.0
*
* -- Copyright Notice --
*
* @par
* Copyright 2001-2005, Intel Corporation.
* All rights reserved.
*
* @par
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* @par
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @par
* -- End of Copyright Notice --
*/
#include "IxEthDB_p.h"
/**
* @brief updates the NPE firewall operating mode and
* firewall address table
*
* @param portID ID of the port
* @param epDelta initial entry point for binary searches (NPE optimization)
* @param address address of the firewall MAC address table
*
* This function will send a message to the NPE configuring the
* firewall mode (white list or black list), invalid source
* address filtering and downloading a new MAC address database
* to be used for firewall matching.
*
* @return IX_ETH_DB_SUCCESS if the operation completed
* successfully or IX_ETH_DB_FAIL otherwise
*
* @internal
*/
IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32 epDelta)
{
IxNpeMhMessage message;
IX_STATUS result;
UINT32 mode = 0;
PortInfo *portInfo = &ixEthDBPortInfo[portID];
mode = (portInfo->srcAddressFilterEnabled != FALSE) << 1 | (portInfo->firewallMode == IX_ETH_DB_FIREWALL_WHITE_LIST);
FILL_SETFIREWALLMODE_MSG(message,
IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID),
epDelta,
mode,
IX_OSAL_MMU_VIRT_TO_PHYS(address));
IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
return result;
}
/**
* @brief configures the firewall white list/black list
* access mode
*
* @param portID ID of the port
* @param mode firewall filtering mode (IX_ETH_DB_FIREWALL_WHITE_LIST
* or IX_ETH_DB_FIREWALL_BLACK_LIST)
*
* Note that this function is documented in the main component
* header file, IxEthDB.h.
*
* @return IX_ETH_DB_SUCCESS if the operation completed
* successfully or an appropriate error message otherwise
*/
IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode)
{
IX_ETH_DB_CHECK_PORT(portID);
IX_ETH_DB_CHECK_SINGLE_NPE(portID);
IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
if (mode != IX_ETH_DB_FIREWALL_WHITE_LIST
&& mode != IX_ETH_DB_FIREWALL_BLACK_LIST)
{
return IX_ETH_DB_INVALID_ARG;
}
ixEthDBPortInfo[portID].firewallMode = mode;
return ixEthDBFirewallTableDownload(portID);
}
/**
* @brief enables or disables the invalid source MAC address filter
*
* @param portID ID of the port
* @param enable TRUE to enable invalid source MAC address filtering
* or FALSE to disable it
*
* The invalid source MAC address filter will discard, when enabled,
* frames whose source MAC address is a multicast or the broadcast MAC
* address.
*
* Note that this function is documented in the main component
* header file, IxEthDB.h.
*
* @return IX_ETH_DB_SUCCESS if the operation completed
* successfully or an appropriate error message otherwise
*/
IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable)
{
IX_ETH_DB_CHECK_PORT(portID);
IX_ETH_DB_CHECK_SINGLE_NPE(portID);
IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
ixEthDBPortInfo[portID].srcAddressFilterEnabled = enable;
return ixEthDBFirewallTableDownload(portID);
}
/**
* @brief adds a firewall record
*
* @param portID ID of the port
* @param macAddr MAC address of the new record
*
* This function will add a new firewall record
* on the specified port, using the specified
* MAC address. If the record already exists this
* function will silently return IX_ETH_DB_SUCCESS,
* although no duplicate records are added.
*
* Note that this function is documented in the main
* component header file, IxEthDB.h.
*
* @return IX_ETH_DB_SUCCESS if the operation completed
* successfully or an appropriate error message otherwise
*/
IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
{
MacDescriptor recordTemplate;
IX_ETH_DB_CHECK_PORT(portID);
IX_ETH_DB_CHECK_SINGLE_NPE(portID);
IX_ETH_DB_CHECK_REFERENCE(macAddr);
IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr));
recordTemplate.type = IX_ETH_DB_FIREWALL_RECORD;
recordTemplate.portID = portID;
return ixEthDBAdd(&recordTemplate, NULL);
}
/**
* @brief removes a firewall record
*
* @param portID ID of the port
* @param macAddr MAC address of the record to remove
*
* This function will attempt to remove a firewall
* record from the given port, using the specified
* MAC address.
*
* Note that this function is documented in the main
* component header file, IxEthDB.h.
*
* @return IX_ETH_DB_SUCCESS if the operation completed
* successfully of an appropriate error message otherwise
*/
IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
{
MacDescriptor recordTemplate;
IX_ETH_DB_CHECK_PORT(portID);
IX_ETH_DB_CHECK_SINGLE_NPE(portID);
IX_ETH_DB_CHECK_REFERENCE(macAddr);
IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr));
recordTemplate.type = IX_ETH_DB_FIREWALL_RECORD;
recordTemplate.portID = portID;
return ixEthDBRemove(&recordTemplate, NULL);
}
/**
* @brief downloads the firewall address table to an NPE
*
* @param portID ID of the port
*
* This function will download the firewall address table to
* an NPE port.
*
* Note that this function is documented in the main
* component header file, IxEthDB.h.
*
* @return IX_ETH_DB_SUCCESS if the operation completed
* successfully or IX_ETH_DB_FAIL otherwise
*/
IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID)
{
IxEthDBPortMap query;
IxEthDBStatus result;
IX_ETH_DB_CHECK_PORT(portID);
IX_ETH_DB_CHECK_SINGLE_NPE(portID);
IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
SET_DEPENDENCY_MAP(query, portID);
ixEthDBUpdateLock();
ixEthDBPortInfo[portID].updateMethod.searchTree = ixEthDBQuery(NULL, query, IX_ETH_DB_FIREWALL_RECORD, MAX_FW_SIZE);
result = ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_FIREWALL_RECORD);
ixEthDBUpdateUnlock();
return result;
}