upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/cpu/ixp/npe/include/IxQMgrAqmIf_p.h

928 lines
25 KiB

/**
* @file IxQMgrAqmIf_p.h
*
* @author Intel Corporation
* @date 30-Oct-2001
*
* @brief The IxQMgrAqmIf sub-component provides a number of inline
* functions for performing I/O on the AQM.
*
* Because some functions contained in this module are inline and are
* used in other modules (within the QMgr component) the definitions are
* contained in this header file. The "normal" use of inline functions
* is to use the inline functions in the module in which they are
* defined. In this case these inline functions are used in external
* modules and therefore the use of "inline extern". What this means
* is as follows: if a function foo is declared as "inline extern"this
* definition is only used for inlining, in no case is the function
* compiled on its own. If the compiler cannot inline the function it
* becomes an external reference. Therefore in IxQMgrAqmIf.c all
* inline functions are defined without the "inline extern" specifier
* and so define the external references. In all other modules these
* funtions are defined as "inline extern".
*
*
* @par
* IXP400 SW Release version 2.0
*
* -- Copyright Notice --
*
* @par
* Copyright 2001-2005, Intel Corporation.
* All rights reserved.
*
* @par
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* @par
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @par
* -- End of Copyright Notice --
*/
#ifndef IXQMGRAQMIF_P_H
#define IXQMGRAQMIF_P_H
#include "IxOsalTypes.h"
/*
* inline definition
*/
#ifdef IX_OSAL_INLINE_ALL
/* If IX_OSAL_INLINE_ALL is set then each inlineable API functions will be defined as
inline functions */
#define IX_QMGR_AQMIF_INLINE IX_OSAL_INLINE_EXTERN
#else
#ifdef IXQMGRAQMIF_C
#ifndef IX_QMGR_AQMIF_INLINE
#define IX_QMGR_AQMIF_INLINE
#endif
#else
#ifndef IX_QMGR_AQMIF_INLINE
#define IX_QMGR_AQMIF_INLINE IX_OSAL_INLINE_EXTERN
#endif
#endif /* IXQMGRAQMIF_C */
#endif /* IX_OSAL_INLINE */
/*
* User defined include files.
*/
#include "IxQMgr.h"
#include "IxQMgrLog_p.h"
#include "IxQMgrQCfg_p.h"
/* Because this file contains inline functions which will be compiled into
* other components, we need to ensure that the IX_COMPONENT_NAME define
* is set to ix_qmgr while this code is being compiled. This will ensure
* that the correct implementation is provided for the memory access macros
* IX_OSAL_READ_LONG and IX_OSAL_WRITE_LONG which are used in this file.
* This must be done before including "IxOsalMemAccess.h"
*/
#define IX_QMGR_AQMIF_SAVED_COMPONENT_NAME IX_COMPONENT_NAME
#undef IX_COMPONENT_NAME
#define IX_COMPONENT_NAME ix_qmgr
#include "IxOsal.h"
/*
* #defines and macros used in this file.
*/
/* Number of bytes per word */
#define IX_QMGR_NUM_BYTES_PER_WORD 4
/* Underflow bit mask */
#define IX_QMGR_UNDERFLOW_BIT_OFFSET 0x0
/* Overflow bit mask */
#define IX_QMGR_OVERFLOW_BIT_OFFSET 0x1
/* Queue access register, queue 0 */
#define IX_QMGR_QUEACC0_OFFSET 0x0000
/* Size of queue access register in words */
#define IX_QMGR_QUEACC_SIZE 0x4/*words*/
/* Queue status register, queues 0-7 */
#define IX_QMGR_QUELOWSTAT0_OFFSET (IX_QMGR_QUEACC0_OFFSET +\
(IX_QMGR_MAX_NUM_QUEUES * IX_QMGR_QUEACC_SIZE * IX_QMGR_NUM_BYTES_PER_WORD))
/* Queue status register, queues 8-15 */
#define IX_QMGR_QUELOWSTAT1_OFFSET (IX_QMGR_QUELOWSTAT0_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue status register, queues 16-23 */
#define IX_QMGR_QUELOWSTAT2_OFFSET (IX_QMGR_QUELOWSTAT1_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue status register, queues 24-31 */
#define IX_QMGR_QUELOWSTAT3_OFFSET (IX_QMGR_QUELOWSTAT2_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue status register Q status bits mask */
#define IX_QMGR_QUELOWSTAT_QUE_STS_BITS_MASK 0xF
/* Size of queue 0-31 status register */
#define IX_QMGR_QUELOWSTAT_SIZE 0x4 /*words*/
/* The number of queues' status specified per word */
#define IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD 0x8
/* Queue UF/OF status register queues 0-15 */
#define IX_QMGR_QUEUOSTAT0_OFFSET (IX_QMGR_QUELOWSTAT3_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue UF/OF status register queues 16-31 */
#define IX_QMGR_QUEUOSTAT1_OFFSET (IX_QMGR_QUEUOSTAT0_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* The number of queues' underflow/overflow status specified per word */
#define IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD 0x10
/* Queue NE status register, queues 32-63 */
#define IX_QMGR_QUEUPPSTAT0_OFFSET (IX_QMGR_QUEUOSTAT1_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue F status register, queues 32-63 */
#define IX_QMGR_QUEUPPSTAT1_OFFSET (IX_QMGR_QUEUPPSTAT0_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Size of queue 32-63 status register */
#define IX_QMGR_QUEUPPSTAT_SIZE 0x2 /*words*/
/* The number of queues' status specified per word */
#define IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD 0x20
/* Queue INT source select register, queues 0-7 */
#define IX_QMGR_INT0SRCSELREG0_OFFSET (IX_QMGR_QUEUPPSTAT1_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue INT source select register, queues 8-15 */
#define IX_QMGR_INT0SRCSELREG1_OFFSET (IX_QMGR_INT0SRCSELREG0_OFFSET+\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue INT source select register, queues 16-23 */
#define IX_QMGR_INT0SRCSELREG2_OFFSET (IX_QMGR_INT0SRCSELREG1_OFFSET+\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue INT source select register, queues 24-31 */
#define IX_QMGR_INT0SRCSELREG3_OFFSET (IX_QMGR_INT0SRCSELREG2_OFFSET+\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Size of interrupt source select reegister */
#define IX_QMGR_INT0SRCSELREG_SIZE 0x4 /*words*/
/* The number of queues' interrupt source select specified per word*/
#define IX_QMGR_INTSRC_NUM_QUE_PER_WORD 0x8
/* Queue INT enable register, queues 0-31 */
#define IX_QMGR_QUEIEREG0_OFFSET (IX_QMGR_INT0SRCSELREG3_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue INT enable register, queues 32-63 */
#define IX_QMGR_QUEIEREG1_OFFSET (IX_QMGR_QUEIEREG0_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue INT register, queues 0-31 */
#define IX_QMGR_QINTREG0_OFFSET (IX_QMGR_QUEIEREG1_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Queue INT register, queues 32-63 */
#define IX_QMGR_QINTREG1_OFFSET (IX_QMGR_QINTREG0_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD)
/* Size of interrupt register */
#define IX_QMGR_QINTREG_SIZE 0x2 /*words*/
/* Number of queues' status specified per word */
#define IX_QMGR_QINTREG_NUM_QUE_PER_WORD 0x20
/* Number of bits per queue interrupt status */
#define IX_QMGR_QINTREG_BITS_PER_QUEUE 0x1
#define IX_QMGR_QINTREG_BIT_OFFSET 0x1
/* Size of address space not used by AQM */
#define IX_QMGR_AQM_UNUSED_ADDRESS_SPACE_SIZE_IN_BYTES 0x1bC0
/* Queue config register, queue 0 */
#define IX_QMGR_QUECONFIG_BASE_OFFSET (IX_QMGR_QINTREG1_OFFSET +\
IX_QMGR_NUM_BYTES_PER_WORD +\
IX_QMGR_AQM_UNUSED_ADDRESS_SPACE_SIZE_IN_BYTES)
/* Total size of configuration words */
#define IX_QMGR_QUECONFIG_SIZE 0x100
/* Start of SRAM queue buffer space */
#define IX_QMGR_QUEBUFFER_SPACE_OFFSET (IX_QMGR_QUECONFIG_BASE_OFFSET +\
IX_QMGR_MAX_NUM_QUEUES * IX_QMGR_NUM_BYTES_PER_WORD)
/* Total bits in a word */
#define BITS_PER_WORD 32
/* Size of queue buffer space */
#define IX_QMGR_QUE_BUFFER_SPACE_SIZE 0x1F00
/*
* This macro will return the address of the access register for the
* queue specified by qId
*/
#define IX_QMGR_Q_ACCESS_ADDR_GET(qId)\
(((qId) * (IX_QMGR_QUEACC_SIZE * IX_QMGR_NUM_BYTES_PER_WORD))\
+ IX_QMGR_QUEACC0_OFFSET)
/*
* Bit location of bit-3 of INT0SRCSELREG0 register to enabled
* sticky interrupt register.
*/
#define IX_QMGR_INT0SRCSELREG0_BIT3 3
/*
* Variable declerations global to this file. Externs are followed by
* statics.
*/
extern UINT32 aqmBaseAddress;
/*
* Function declarations.
*/
void
ixQMgrAqmIfInit (void);
void
ixQMgrAqmIfUninit (void);
unsigned
ixQMgrAqmIfLog2 (unsigned number);
void
ixQMgrAqmIfQRegisterBitsWrite (IxQMgrQId qId,
UINT32 registerBaseAddrOffset,
unsigned queuesPerRegWord,
UINT32 value);
void
ixQMgrAqmIfQStatusCheckValsCalc (IxQMgrQId qId,
IxQMgrSourceId srcSel,
unsigned int *statusWordOffset,
UINT32 *checkValue,
UINT32 *mask);
/*
* The Xscale software allways deals with logical addresses and so the
* base address of the AQM memory space is not a hardcoded value. This
* function must be called before any other function in this component.
* NO CHECKING is performed to ensure that the base address has been
* set.
*/
void
ixQMgrAqmIfBaseAddressSet (UINT32 address);
/*
* Get the base address of the AQM memory space.
*/
void
ixQMgrAqmIfBaseAddressGet (UINT32 *address);
/*
* Get the sram base address
*/
void
ixQMgrAqmIfSramBaseAddressGet (UINT32 *address);
/*
* Read a queue status
*/
void
ixQMgrAqmIfQueStatRead (IxQMgrQId qId,
IxQMgrQStatus* status);
/*
* Set INT0SRCSELREG0 Bit3
*/
void ixQMgrAqmIfIntSrcSelReg0Bit3Set (void);
/*
* Set the interrupt source
*/
void
ixQMgrAqmIfIntSrcSelWrite (IxQMgrQId qId,
IxQMgrSourceId sourceId);
/*
* Enable interruptson a queue
*/
void
ixQMgrAqmIfQInterruptEnable (IxQMgrQId qId);
/*
* Disable interrupt on a quee
*/
void
ixQMgrAqmIfQInterruptDisable (IxQMgrQId qId);
/*
* Write the config register of the specified queue
*/
void
ixQMgrAqmIfQueCfgWrite (IxQMgrQId qId,
IxQMgrQSizeInWords qSizeInWords,
IxQMgrQEntrySizeInWords entrySizeInWords,
UINT32 freeSRAMAddress);
/*
* read fields from the config of the specified queue.
*/
void
ixQMgrAqmIfQueCfgRead (IxQMgrQId qId,
unsigned int numEntries,
UINT32 *baseAddress,
unsigned int *ne,
unsigned int *nf,
UINT32 *readPtr,
UINT32 *writePtr);
/*
* Set the ne and nf watermark level on a queue.
*/
void
ixQMgrAqmIfWatermarkSet (IxQMgrQId qId,
unsigned ne,
unsigned nf);
/* Inspect an entry without moving the read pointer */
IX_STATUS
ixQMgrAqmIfQPeek (IxQMgrQId qId,
unsigned int entryIndex,
unsigned int *entry);
/* Modify an entry without moving the write pointer */
IX_STATUS
ixQMgrAqmIfQPoke (IxQMgrQId qId,
unsigned int entryIndex,
unsigned int *entry);
/*
* Function prototype for inline functions. For description refers to
* the functions defintion below.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfWordWrite (VUINT32 *address,
UINT32 word);
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfWordRead (VUINT32 *address,
UINT32 *word);
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQPop (IxQMgrQId qId,
IxQMgrQEntrySizeInWords numWords,
UINT32 *entry);
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQPush (IxQMgrQId qId,
IxQMgrQEntrySizeInWords numWords,
UINT32 *entry);
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQStatusRegsRead (IxQMgrDispatchGroup group,
UINT32 *qStatusWords);
IX_QMGR_AQMIF_INLINE BOOL
ixQMgrAqmIfQStatusCheck (UINT32 *oldQStatusWords,
UINT32 *newQStatusWords,
unsigned int statusWordOffset,
UINT32 checkValue,
UINT32 mask);
IX_QMGR_AQMIF_INLINE BOOL
ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId,
UINT32 registerBaseAddrOffset,
unsigned queuesPerRegWord,
unsigned relativeBitOffset,
BOOL reset);
IX_QMGR_AQMIF_INLINE BOOL
ixQMgrAqmIfUnderflowCheck (IxQMgrQId qId);
IX_QMGR_AQMIF_INLINE BOOL
ixQMgrAqmIfOverflowCheck (IxQMgrQId qId);
IX_QMGR_AQMIF_INLINE UINT32
ixQMgrAqmIfQRegisterBitsRead (IxQMgrQId qId,
UINT32 registerBaseAddrOffset,
unsigned queuesPerRegWord);
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQInterruptRegWrite (IxQMgrDispatchGroup group,
UINT32 reg);
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQInterruptRegRead (IxQMgrDispatchGroup group,
UINT32 *regVal);
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQueLowStatRead (IxQMgrQId qId,
IxQMgrQStatus *status);
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQueUppStatRead (IxQMgrQId qId,
IxQMgrQStatus *status);
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQueStatRead (IxQMgrQId qId,
IxQMgrQStatus *qStatus);
IX_QMGR_AQMIF_INLINE unsigned
ixQMgrAqmIfPow2NumDivide (unsigned numerator,
unsigned denominator);
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQInterruptEnableRegRead (IxQMgrDispatchGroup group,
UINT32 *regVal);
/*
* Inline functions
*/
/*
* This inline function is used by other QMgr components to write one
* word to the specified address.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfWordWrite (VUINT32 *address,
UINT32 word)
{
IX_OSAL_WRITE_LONG(address, word);
}
/*
* This inline function is used by other QMgr components to read a
* word from the specified address.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfWordRead (VUINT32 *address,
UINT32 *word)
{
*word = IX_OSAL_READ_LONG(address);
}
/*
* This inline function is used by other QMgr components to pop an
* entry off the specified queue.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQPop (IxQMgrQId qId,
IxQMgrQEntrySizeInWords numWords,
UINT32 *entry)
{
volatile UINT32 *accRegAddr;
accRegAddr = (UINT32*)(aqmBaseAddress +
IX_QMGR_Q_ACCESS_ADDR_GET(qId));
switch (numWords)
{
case IX_QMGR_Q_ENTRY_SIZE1:
ixQMgrAqmIfWordRead (accRegAddr, entry);
break;
case IX_QMGR_Q_ENTRY_SIZE2:
ixQMgrAqmIfWordRead (accRegAddr++, entry++);
ixQMgrAqmIfWordRead (accRegAddr, entry);
break;
case IX_QMGR_Q_ENTRY_SIZE4:
ixQMgrAqmIfWordRead (accRegAddr++, entry++);
ixQMgrAqmIfWordRead (accRegAddr++, entry++);
ixQMgrAqmIfWordRead (accRegAddr++, entry++);
ixQMgrAqmIfWordRead (accRegAddr, entry);
break;
default:
IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfQPop");
break;
}
}
/*
* This inline function is used by other QMgr components to push an
* entry to the specified queue.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQPush (IxQMgrQId qId,
IxQMgrQEntrySizeInWords numWords,
UINT32 *entry)
{
volatile UINT32 *accRegAddr;
accRegAddr = (UINT32*)(aqmBaseAddress +
IX_QMGR_Q_ACCESS_ADDR_GET(qId));
switch (numWords)
{
case IX_QMGR_Q_ENTRY_SIZE1:
ixQMgrAqmIfWordWrite (accRegAddr, *entry);
break;
case IX_QMGR_Q_ENTRY_SIZE2:
ixQMgrAqmIfWordWrite (accRegAddr++, *entry++);
ixQMgrAqmIfWordWrite (accRegAddr, *entry);
break;
case IX_QMGR_Q_ENTRY_SIZE4:
ixQMgrAqmIfWordWrite (accRegAddr++, *entry++);
ixQMgrAqmIfWordWrite (accRegAddr++, *entry++);
ixQMgrAqmIfWordWrite (accRegAddr++, *entry++);
ixQMgrAqmIfWordWrite (accRegAddr, *entry);
break;
default:
IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfQPush");
break;
}
}
/*
* The AQM interrupt registers contains a bit for each AQM queue
* specifying the queue (s) that cause an interrupt to fire. This
* function is called by IxQMGrDispatcher component.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQStatusRegsRead (IxQMgrDispatchGroup group,
UINT32 *qStatusWords)
{
volatile UINT32 *regAddress = NULL;
if (group == IX_QMGR_QUELOW_GROUP)
{
regAddress = (UINT32*)(aqmBaseAddress +
IX_QMGR_QUELOWSTAT0_OFFSET);
ixQMgrAqmIfWordRead (regAddress++, qStatusWords++);
ixQMgrAqmIfWordRead (regAddress++, qStatusWords++);
ixQMgrAqmIfWordRead (regAddress++, qStatusWords++);
ixQMgrAqmIfWordRead (regAddress, qStatusWords);
}
else /* We have the upper queues */
{
/* Only need to read the Nearly Empty status register for
* queues 32-63 as for therse queues the interrtupt source
* condition is fixed to Nearly Empty
*/
regAddress = (UINT32*)(aqmBaseAddress +
IX_QMGR_QUEUPPSTAT0_OFFSET);
ixQMgrAqmIfWordRead (regAddress, qStatusWords);
}
}
/*
* This function check if the status for a queue has changed between
* 2 snapshots and if it has, that the status matches a particular
* value after masking.
*/
IX_QMGR_AQMIF_INLINE BOOL
ixQMgrAqmIfQStatusCheck (UINT32 *oldQStatusWords,
UINT32 *newQStatusWords,
unsigned int statusWordOffset,
UINT32 checkValue,
UINT32 mask)
{
if (((oldQStatusWords[statusWordOffset] & mask) !=
(newQStatusWords[statusWordOffset] & mask)) &&
((newQStatusWords[statusWordOffset] & mask) == checkValue))
{
return TRUE;
}
return FALSE;
}
/*
* The AQM interrupt register contains a bit for each AQM queue
* specifying the queue (s) that cause an interrupt to fire. This
* function is called by IxQMgrDispatcher component.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQInterruptRegRead (IxQMgrDispatchGroup group,
UINT32 *regVal)
{
volatile UINT32 *regAddress;
if (group == IX_QMGR_QUELOW_GROUP)
{
regAddress = (UINT32*)(aqmBaseAddress +
IX_QMGR_QINTREG0_OFFSET);
}
else
{
regAddress = (UINT32*)(aqmBaseAddress +
IX_QMGR_QINTREG1_OFFSET);
}
ixQMgrAqmIfWordRead (regAddress, regVal);
}
/*
* The AQM interrupt enable register contains a bit for each AQM queue.
* This function reads the interrupt enable register. This
* function is called by IxQMgrDispatcher component.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQInterruptEnableRegRead (IxQMgrDispatchGroup group,
UINT32 *regVal)
{
volatile UINT32 *regAddress;
if (group == IX_QMGR_QUELOW_GROUP)
{
regAddress = (UINT32*)(aqmBaseAddress +
IX_QMGR_QUEIEREG0_OFFSET);
}
else
{
regAddress = (UINT32*)(aqmBaseAddress +
IX_QMGR_QUEIEREG1_OFFSET);
}
ixQMgrAqmIfWordRead (regAddress, regVal);
}
/*
* This inline function will read the status bit of a queue
* specified by qId. If reset is TRUE the bit is cleared.
*/
IX_QMGR_AQMIF_INLINE BOOL
ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId,
UINT32 registerBaseAddrOffset,
unsigned queuesPerRegWord,
unsigned relativeBitOffset,
BOOL reset)
{
UINT32 actualBitOffset;
volatile UINT32 *registerAddress;
UINT32 registerWord;
/*
* Calculate the registerAddress
* multiple queues split accross registers
*/
registerAddress = (UINT32*)(aqmBaseAddress +
registerBaseAddrOffset +
((qId / queuesPerRegWord) *
IX_QMGR_NUM_BYTES_PER_WORD));
/*
* Get the status word
*/
ixQMgrAqmIfWordRead (registerAddress, &registerWord);
/*
* Calculate the actualBitOffset
* status for multiple queues stored in one register
*/
actualBitOffset = (relativeBitOffset + 1) <<
((qId & (queuesPerRegWord - 1)) * (BITS_PER_WORD / queuesPerRegWord));
/* Check if the status bit is set */
if (registerWord & actualBitOffset)
{
/* Clear the bit if reset */
if (reset)
{
ixQMgrAqmIfWordWrite (registerAddress, registerWord & (~actualBitOffset));
}
return TRUE;
}
/* Bit not set */
return FALSE;
}
/*
* @ingroup IxQmgrAqmIfAPI
*
* @brief Read the underflow status of a queue
*
* This inline function will read the underflow status of a queue
* specified by qId.
*
*/
IX_QMGR_AQMIF_INLINE BOOL
ixQMgrAqmIfUnderflowCheck (IxQMgrQId qId)
{
if (qId < IX_QMGR_MIN_QUEUPP_QID)
{
return (ixQMgrAqmIfRegisterBitCheck (qId,
IX_QMGR_QUEUOSTAT0_OFFSET,
IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD,
IX_QMGR_UNDERFLOW_BIT_OFFSET,
TRUE/*reset*/));
}
else
{
/* Qs 32-63 have no underflow status */
return FALSE;
}
}
/*
* This inline function will read the overflow status of a queue
* specified by qId.
*/
IX_QMGR_AQMIF_INLINE BOOL
ixQMgrAqmIfOverflowCheck (IxQMgrQId qId)
{
if (qId < IX_QMGR_MIN_QUEUPP_QID)
{
return (ixQMgrAqmIfRegisterBitCheck (qId,
IX_QMGR_QUEUOSTAT0_OFFSET,
IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD,
IX_QMGR_OVERFLOW_BIT_OFFSET,
TRUE/*reset*/));
}
else
{
/* Qs 32-63 have no overflow status */
return FALSE;
}
}
/*
* This inline function will read the status bits of a queue
* specified by qId.
*/
IX_QMGR_AQMIF_INLINE UINT32
ixQMgrAqmIfQRegisterBitsRead (IxQMgrQId qId,
UINT32 registerBaseAddrOffset,
unsigned queuesPerRegWord)
{
volatile UINT32 *registerAddress;
UINT32 registerWord;
UINT32 statusBitsMask;
UINT32 bitsPerQueue;
bitsPerQueue = BITS_PER_WORD / queuesPerRegWord;
/*
* Calculate the registerAddress
* multiple queues split accross registers
*/
registerAddress = (UINT32*)(aqmBaseAddress +
registerBaseAddrOffset +
((qId / queuesPerRegWord) *
IX_QMGR_NUM_BYTES_PER_WORD));
/*
* Read the status word
*/
ixQMgrAqmIfWordRead (registerAddress, &registerWord);
/*
* Calculate the mask for the status bits for this queue.
*/
statusBitsMask = ((1 << bitsPerQueue) - 1);
/*
* Shift the status word so it is right justified
*/
registerWord >>= ((qId & (queuesPerRegWord - 1)) * bitsPerQueue);
/*
* Mask out all bar the status bits for this queue
*/
return (registerWord &= statusBitsMask);
}
/*
* This function is called by IxQMgrDispatcher to set the contents of
* the AQM interrupt register.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQInterruptRegWrite (IxQMgrDispatchGroup group,
UINT32 reg)
{
volatile UINT32 *address;
if (group == IX_QMGR_QUELOW_GROUP)
{
address = (UINT32*)(aqmBaseAddress +
IX_QMGR_QINTREG0_OFFSET);
}
else
{
address = (UINT32*)(aqmBaseAddress +
IX_QMGR_QINTREG1_OFFSET);
}
ixQMgrAqmIfWordWrite (address, reg);
}
/*
* Read the status of a queue in the range 0-31.
*
* This function is used by other QMgr components to read the
* status of the queue specified by qId.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQueLowStatRead (IxQMgrQId qId,
IxQMgrQStatus *status)
{
/* Read the general status bits */
*status = ixQMgrAqmIfQRegisterBitsRead (qId,
IX_QMGR_QUELOWSTAT0_OFFSET,
IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD);
}
/*
* This function will read the status of the queue specified
* by qId.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQueUppStatRead (IxQMgrQId qId,
IxQMgrQStatus *status)
{
/* Reset the status bits */
*status = 0;
/*
* Check if the queue is nearly empty,
* N.b. QUPP stat register contains status for regs 32-63 at each
* bit position so subtract 32 to get bit offset
*/
if (ixQMgrAqmIfRegisterBitCheck ((qId - IX_QMGR_MIN_QUEUPP_QID),
IX_QMGR_QUEUPPSTAT0_OFFSET,
IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD,
0/*relativeBitOffset*/,
FALSE/*!reset*/))
{
*status |= IX_QMGR_Q_STATUS_NE_BIT_MASK;
}
/*
* Check if the queue is full,
* N.b. QUPP stat register contains status for regs 32-63 at each
* bit position so subtract 32 to get bit offset
*/
if (ixQMgrAqmIfRegisterBitCheck ((qId - IX_QMGR_MIN_QUEUPP_QID),
IX_QMGR_QUEUPPSTAT1_OFFSET,
IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD,
0/*relativeBitOffset*/,
FALSE/*!reset*/))
{
*status |= IX_QMGR_Q_STATUS_F_BIT_MASK;
}
}
/*
* This function is used by other QMgr components to read the
* status of the queue specified by qId.
*/
IX_QMGR_AQMIF_INLINE void
ixQMgrAqmIfQueStatRead (IxQMgrQId qId,
IxQMgrQStatus *qStatus)
{
if (qId < IX_QMGR_MIN_QUEUPP_QID)
{
ixQMgrAqmIfQueLowStatRead (qId, qStatus);
}
else
{
ixQMgrAqmIfQueUppStatRead (qId, qStatus);
}
}
/*
* This function performs a mod division
*/
IX_QMGR_AQMIF_INLINE unsigned
ixQMgrAqmIfPow2NumDivide (unsigned numerator,
unsigned denominator)
{
/* Number is evenly divisable by 2 */
return (numerator >> ixQMgrAqmIfLog2 (denominator));
}
/* Restore IX_COMPONENT_NAME */
#undef IX_COMPONENT_NAME
#define IX_COMPONENT_NAME IX_QMGR_AQMIF_SAVED_COMPONENT_NAME
#endif/*IXQMGRAQMIF_P_H*/