Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
21867 Commits
3 Branches
0 Tags
148 MiB
Tag: Branch: Tree: 7b412ab31f
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '7b412ab31f'
${ noResults }
u-boot/arch/arm/dts/tegra114.dtsi

247 lines
5.4 KiB
Raw Normal View History Unescape

Tegra: fdt: Change /include/ to #include for C preprocessor dts Makefile has the arch & board include paths added to DTS_CPPFLAGS. This allows the use of '#include "xyz"' in the dts/dtsi file which helps the C preprocessor find common dtsi include files. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
#include "skeleton.dtsi"
Tegra114: Dalmore: Add DT files These are stripped down for bringup, They'll be filled out later to match-up with the kernel DT contents, and/or as devices are brought up (mmc, usb, spi, etc.). Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years ago
/ {
compatible = "nvidia,tegra114";
Tegra114: fdt: Update DT files with I2C info for T114/Dalmore T114, like T30, does not have a separate/different DVC (power I2C) controller like T20 - all 5 I2C controllers are identical, but I2C5 is used to designate the controller intended for power control (PWR_I2C in the schematics). PWR_I2C is set to 400KHz. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO, tegra_car) Minor edit to tegra_car node, add gpio node. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
tegra_car: clock {
Tegra114: fdt: Update DT files with I2C info for T114/Dalmore T114, like T30, does not have a separate/different DVC (power I2C) controller like T20 - all 5 I2C controllers are identical, but I2C5 is used to designate the controller intended for power control (PWR_I2C in the schematics). PWR_I2C is set to 400KHz. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
tegra114: fdt: add apbdma block Add node for apbdma controller hardware. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
apbdma: dma {
compatible = "nvidia,tegra114-apbdma", "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1400>;
interrupts = <0 104 0x04
0 105 0x04
0 106 0x04
0 107 0x04
0 108 0x04
0 109 0x04
0 110 0x04
0 111 0x04
0 112 0x04
0 113 0x04
0 114 0x04
0 115 0x04
0 116 0x04
0 117 0x04
0 118 0x04
0 119 0x04
0 128 0x04
0 129 0x04
0 130 0x04
0 131 0x04
0 132 0x04
0 133 0x04
0 134 0x04
0 135 0x04
0 136 0x04
0 137 0x04
0 138 0x04
0 139 0x04
0 140 0x04
0 141 0x04
0 142 0x04
0 143 0x04>;
};
Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO, tegra_car) Minor edit to tegra_car node, add gpio node. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
gpio: gpio {
compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
interrupts = <0 32 0x04
0 33 0x04
0 34 0x04
0 35 0x04
0 55 0x04
0 87 0x04
0 89 0x04
0 125 0x04>;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
Tegra114: fdt: Update DT files with I2C info for T114/Dalmore T114, like T30, does not have a separate/different DVC (power I2C) controller like T20 - all 5 I2C controllers are identical, but I2C5 is used to designate the controller intended for power control (PWR_I2C in the schematics). PWR_I2C is set to 400KHz. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
i2c@7000c000 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c000 0x100>;
interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 12>;
status = "disabled";
};
i2c@7000c400 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c400 0x100>;
interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 54>;
status = "disabled";
};
i2c@7000c500 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c500 0x100>;
interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 67>;
status = "disabled";
};
i2c@7000c700 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c700 0x100>;
interrupts = <0 120 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 103>;
status = "disabled";
};
i2c@7000d000 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000d000 0x100>;
interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 47>;
status = "disabled";
};
tegra114: fdt: add SPI blocks Add nodes for t114 SPI controller hardware Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
spi@7000d400 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d400 0x200>;
interrupts = <0 59 0x04>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC1, PLLP_OUT0 */
clocks = <&tegra_car 41>;
};
spi@7000d600 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC2, PLLP_OUT0 */
clocks = <&tegra_car 44>;
};
spi@7000d800 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d480 0x200>;
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC3, PLLP_OUT0 */
clocks = <&tegra_car 46>;
};
spi@7000da00 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000da00 0x200>;
interrupts = <0 93 0x04>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC4, PLLP_OUT0 */
clocks = <&tegra_car 68>;
};
spi@7000dc00 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000dc00 0x200>;
interrupts = <0 94 0x04>;
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC5, PLLP_OUT0 */
clocks = <&tegra_car 104>;
};
spi@7000de00 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000de00 0x200>;
interrupts = <0 79 0x04>;
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC6, PLLP_OUT0 */
clocks = <&tegra_car 105>;
};
Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for now) Took these values directly from the kernel dts files. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
sdhci@78000000 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000000 0x200>;
interrupts = <0 14 0x04>;
clocks = <&tegra_car 14>;
status = "disable";
};
sdhci@78000200 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000200 0x200>;
interrupts = <0 15 0x04>;
clocks = <&tegra_car 9>;
status = "disable";
};
sdhci@78000400 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000400 0x200>;
interrupts = <0 19 0x04>;
clocks = <&tegra_car 69>;
status = "disable";
};
sdhci@78000600 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000600 0x200>;
interrupts = <0 31 0x04>;
clocks = <&tegra_car 15>;
status = "disable";
};
ARM: Tegra: FDT: Add USB EHCI function for T30/T114 Add DT node for USB EHCI function. Add support for T30-Cardhu, T30-Beaver, T114-Dalmore boards. Signed-off-by: Jim Lin <jilin@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years ago
usb@7d000000 {
compatible = "nvidia,tegra114-ehci";
reg = <0x7d000000 0x4000>;
interrupts = <52>;
phy_type = "utmi";
clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */
status = "disabled";
};
usb@7d004000 {
compatible = "nvidia,tegra114-ehci";
reg = <0x7d004000 0x4000>;
interrupts = <53>;
phy_type = "hsic";
clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */
status = "disabled";
};
usb@7d008000 {
compatible = "nvidia,tegra114-ehci";
reg = <0x7d008000 0x4000>;
interrupts = <129>;
phy_type = "utmi";
clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */
status = "disabled";
};
Tegra114: Dalmore: Add DT files These are stripped down for bringup, They'll be filled out later to match-up with the kernel DT contents, and/or as devices are brought up (mmc, usb, spi, etc.). Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years ago
};