upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/arch/arm/include/asm/arch-lpc32xx/cpu.h

65 lines
2.9 KiB

/*
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef _LPC32XX_CPU_H
#define _LPC32XX_CPU_H
/* LPC32XX Memory map */
/* AHB physical base addresses */
#define SLC_NAND_BASE 0x20020000 /* SLC NAND Flash registers base */
#define SSP0_BASE 0x20084000 /* SSP0 registers base */
#define SD_CARD_BASE 0x20098000 /* SD card interface registers base */
#define MLC_NAND_BASE 0x200A8000 /* MLC NAND Flash registers base */
#define DMA_BASE 0x31000000 /* DMA controller registers base */
#define USB_BASE 0x31020000 /* USB registers base */
#define LCD_BASE 0x31040000 /* LCD registers base */
#define ETHERNET_BASE 0x31060000 /* Ethernet registers base */
#define EMC_BASE 0x31080000 /* EMC configuration registers base */
/* FAB peripherals base addresses */
#define CLK_PM_BASE 0x40004000 /* System control registers base */
#define HS_UART1_BASE 0x40014000 /* High speed UART 1 registers base */
#define HS_UART2_BASE 0x40018000 /* High speed UART 2 registers base */
#define HS_UART7_BASE 0x4001C000 /* High speed UART 7 registers base */
#define RTC_BASE 0x40024000 /* RTC registers base */
#define GPIO_BASE 0x40028000 /* GPIO registers base */
#define WDT_BASE 0x4003C000 /* Watchdog timer registers base */
#define TIMER0_BASE 0x40044000 /* Timer0 registers base */
#define TIMER1_BASE 0x4004C000 /* Timer1 registers base */
#define UART_CTRL_BASE 0x40054000 /* UART control regsisters base */
/* APB peripherals base addresses */
#define UART3_BASE 0x40080000 /* UART 3 registers base */
#define UART4_BASE 0x40088000 /* UART 4 registers base */
#define UART5_BASE 0x40090000 /* UART 5 registers base */
#define UART6_BASE 0x40098000 /* UART 6 registers base */
/* External SDRAM Memory Bank base addresses */
#define EMC_DYCS0_BASE 0x80000000 /* SDRAM DYCS0 base address */
#define EMC_DYCS1_BASE 0xA0000000 /* SDRAM DYCS1 base address */
/* External Static Memory Bank base addresses */
#define EMC_CS0_BASE 0xE0000000
#define EMC_CS1_BASE 0xE1000000
#define EMC_CS2_BASE 0xE2000000
#define EMC_CS3_BASE 0xE3000000
#endif /* _LPC32XX_CPU_H */