upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/arch/arm/include/asm/arch-lpc32xx/emc.h

93 lines
3.7 KiB

/*
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef _LPC32XX_EMC_H
#define _LPC32XX_EMC_H
#include <asm/types.h>
/* EMC Registers */
struct emc_regs {
u32 ctrl; /* Controls operation of the EMC */
u32 status; /* Provides EMC status information */
u32 config; /* Configures operation of the EMC */
u32 reserved0[5];
u32 control; /* Controls dyn memory operation */
u32 refresh; /* Configures dyn memory refresh operation */
u32 read_config; /* Configures the dyn memory read strategy */
u32 reserved1;
u32 t_rp; /* Precharge command period */
u32 t_ras; /* Active to precharge command period */
u32 t_srex; /* Self-refresh exit time */
u32 reserved2[2];
u32 t_wr; /* Write recovery time */
u32 t_rc; /* Active to active command period */
u32 t_rfc; /* Auto-refresh period */
u32 t_xsr; /* Exit self-refresh to active command time */
u32 t_rrd; /* Active bank A to active bank B latency */
u32 t_mrd; /* Load mode register to active command time */
u32 t_cdlr; /* Last data in to read command time */
u32 reserved3[8];
u32 extended_wait; /* time for static memory rd/wr transfers */
u32 reserved4[31];
u32 config0; /* Configuration information for the SDRAM */
u32 rascas0; /* RAS and CAS latencies for the SDRAM */
u32 reserved5[6];
u32 config1; /* Configuration information for the SDRAM */
u32 rascas1; /* RAS and CAS latencies for the SDRAM */
u32 reserved6[54];
struct emc_stat_t {
u32 config; /* Static memory configuration */
u32 waitwen; /* Delay from chip select to write enable */
u32 waitoen; /* Delay to output enable */
u32 waitrd; /* Delay to a read access */
u32 waitpage; /* Delay for async page mode read */
u32 waitwr; /* Delay to a write access */
u32 waitturn; /* Number of bus turnaround cycles */
u32 reserved;
} stat[4];
u32 reserved7[96];
struct emc_ahb_t {
u32 control; /* Control register for AHB */
u32 status; /* Status register for AHB */
u32 timeout; /* Timeout register for AHB */
u32 reserved[5];
} ahb[5];
};
/* Static Memory Configuration Register bits */
#define EMC_STAT_CONFIG_WP (1 << 20)
#define EMC_STAT_CONFIG_EW (1 << 8)
#define EMC_STAT_CONFIG_PB (1 << 7)
#define EMC_STAT_CONFIG_PC (1 << 6)
#define EMC_STAT_CONFIG_PM (1 << 3)
#define EMC_STAT_CONFIG_32BIT (2 << 0)
#define EMC_STAT_CONFIG_16BIT (1 << 0)
#define EMC_STAT_CONFIG_8BIT (0 << 0)
/* Static Memory Delay Registers */
#define EMC_STAT_WAITWEN(n) (((n) - 1) & 0x0F)
#define EMC_STAT_WAITOEN(n) (((n) - 1) & 0x0F)
#define EMC_STAT_WAITRD(n) (((n) - 1) & 0x1F)
#define EMC_STAT_WAITPAGE(n) (((n) - 1) & 0x1F)
#define EMC_STAT_WAITWR(n) (((n) - 2) & 0x1F)
#define EMC_STAT_WAITTURN(n) (((n) - 1) & 0x0F)
#endif /* _LPC32XX_EMC_H */