upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/tools/ublimage.c

261 lines
6.1 KiB

/*
* (C) Copyright 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* Based on:
* (C) Copyright 2009
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
*
* (C) Copyright 2008
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "imagetool.h"
#include <image.h>
#include "ublimage.h"
/*
* Supported commands for configuration file
*/
static table_entry_t ublimage_cmds[] = {
{CMD_BOOT_MODE, "MODE", "UBL special modes", },
{CMD_ENTRY, "ENTRY", "Entry point addr for bootloader", },
{CMD_PAGE, "PAGES",
"number of pages (size of bootloader)", },
{CMD_ST_BLOCK, "START_BLOCK",
"block number where bootloader is present", },
{CMD_ST_PAGE, "START_PAGE",
"page number where bootloader is present", },
{CMD_LD_ADDR, "LD_ADDR",
"load addr", },
{-1, "", "", },
};
/*
* Supported Boot options for configuration file
* this is needed to set the correct flash offset
*/
static table_entry_t ublimage_bootops[] = {
{UBL_MAGIC_SAFE, "safe", "Safe boot mode", },
{-1, "", "Invalid", },
};
static struct ubl_header ublimage_header;
static uint32_t get_cfg_value(char *token, char *name, int linenr)
{
char *endptr;
uint32_t value;
errno = 0;
value = strtoul(token, &endptr, 16);
if (errno || (token == endptr)) {
fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n",
name, linenr, token);
exit(EXIT_FAILURE);
}
return value;
}
static void print_hdr(struct ubl_header *ubl_hdr)
{
printf("Image Type : Davinci UBL Boot Image\n");
printf("UBL magic : %08x\n", ubl_hdr->magic);
printf("Entry Point: %08x\n", ubl_hdr->entry);
printf("nr of pages: %08x\n", ubl_hdr->pages);
printf("start block: %08x\n", ubl_hdr->block);
printf("start page : %08x\n", ubl_hdr->page);
}
static void parse_cfg_cmd(struct ubl_header *ublhdr, int32_t cmd, char *token,
char *name, int lineno, int fld, int dcd_len)
{
static int cmd_ver_first = ~0;
switch (cmd) {
case CMD_BOOT_MODE:
ublhdr->magic = get_table_entry_id(ublimage_bootops,
"ublimage special boot mode", token);
if (ublhdr->magic == -1) {
fprintf(stderr, "Error: %s[%d] -Invalid boot mode"
"(%s)\n", name, lineno, token);
exit(EXIT_FAILURE);
}
ublhdr->magic += UBL_MAGIC_BASE;
if (unlikely(cmd_ver_first != 1))
cmd_ver_first = 0;
break;
case CMD_ENTRY:
ublhdr->entry = get_cfg_value(token, name, lineno);
break;
case CMD_PAGE:
ublhdr->pages = get_cfg_value(token, name, lineno);
break;
case CMD_ST_BLOCK:
ublhdr->block = get_cfg_value(token, name, lineno);
break;
case CMD_ST_PAGE:
ublhdr->page = get_cfg_value(token, name, lineno);
break;
case CMD_LD_ADDR:
ublhdr->pll_m = get_cfg_value(token, name, lineno);
break;
}
}
static void parse_cfg_fld(struct ubl_header *ublhdr, int32_t *cmd,
char *token, char *name, int lineno, int fld, int *dcd_len)
{
switch (fld) {
case CFG_COMMAND:
*cmd = get_table_entry_id(ublimage_cmds,
"ublimage commands", token);
if (*cmd < 0) {
fprintf(stderr, "Error: %s[%d] - Invalid command"
"(%s)\n", name, lineno, token);
exit(EXIT_FAILURE);
}
break;
case CFG_REG_VALUE:
parse_cfg_cmd(ublhdr, *cmd, token, name, lineno, fld, *dcd_len);
break;
default:
break;
}
}
static uint32_t parse_cfg_file(struct ubl_header *ublhdr, char *name)
{
FILE *fd = NULL;
char *line = NULL;
char *token, *saveptr1, *saveptr2;
int lineno = 0;
int i;
char *ptr = (char *)ublhdr;
int fld;
size_t len;
int dcd_len = 0;
int32_t cmd;
int ublhdrlen = sizeof(struct ubl_header);
fd = fopen(name, "r");
if (fd == 0) {
fprintf(stderr, "Error: %s - Can't open DCD file\n", name);
exit(EXIT_FAILURE);
}
/* Fill header with 0xff */
for (i = 0; i < ublhdrlen; i++) {
*ptr = 0xff;
ptr++;
}
/*
* Very simple parsing, line starting with # are comments
* and are dropped
*/
while ((getline(&line, &len, fd)) > 0) {
lineno++;
token = strtok_r(line, "\r\n", &saveptr1);
if (token == NULL)
continue;
/* Check inside the single line */
for (fld = CFG_COMMAND, cmd = CMD_INVALID,
line = token; ; line = NULL, fld++) {
token = strtok_r(line, " \t", &saveptr2);
if (token == NULL)
break;
/* Drop all text starting with '#' as comments */
if (token[0] == '#')
break;
parse_cfg_fld(ublhdr, &cmd, token, name,
lineno, fld, &dcd_len);
}
}
fclose(fd);
return dcd_len;
}
static int ublimage_check_image_types(uint8_t type)
{
if (type == IH_TYPE_UBLIMAGE)
return EXIT_SUCCESS;
else
return EXIT_FAILURE;
}
static int ublimage_verify_header(unsigned char *ptr, int image_size,
struct image_tool_params *params)
{
struct ubl_header *ubl_hdr = (struct ubl_header *)ptr;
if ((ubl_hdr->magic & 0xFFFFFF00) != UBL_MAGIC_BASE)
return -1;
return 0;
}
static void ublimage_print_header(const void *ptr)
{
struct ubl_header *ubl_hdr = (struct ubl_header *) ptr;
print_hdr(ubl_hdr);
}
static void ublimage_set_header(void *ptr, struct stat *sbuf, int ifd,
struct image_tool_params *params)
{
struct ubl_header *ublhdr = (struct ubl_header *)ptr;
/* Parse configuration file */
parse_cfg_file(ublhdr, params->imagename);
}
int ublimage_check_params(struct image_tool_params *params)
{
if (!params)
return CFG_INVALID;
if (!strlen(params->imagename)) {
fprintf(stderr, "Error: %s - Configuration file not"
"specified, it is needed for ublimage generation\n",
params->cmdname);
return CFG_INVALID;
}
/*
* Check parameters:
* XIP is not allowed and verify that incompatible
* parameters are not sent at the same time
* For example, if list is required a data image must not be provided
*/
return (params->dflag && (params->fflag || params->lflag)) ||
(params->fflag && (params->dflag || params->lflag)) ||
(params->lflag && (params->dflag || params->fflag)) ||
(params->xflag) || !(strlen(params->imagename));
}
/*
* ublimage parameters
*/
U_BOOT_IMAGE_TYPE(
ublimage,
"Davinci UBL boot support",
sizeof(struct ubl_header),
(void *)&ublimage_header,
ublimage_check_params,
ublimage_verify_header,
ublimage_print_header,
ublimage_set_header,
NULL,
ublimage_check_image_types,
NULL,
NULL
);