|
|
|
/*
|
|
|
|
* Copyright (c) 2012 Samsung Electronics.
|
|
|
|
* Abhilash Kesavan <a.kesavan@samsung.com>
|
|
|
|
*
|
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <common.h>
|
|
|
|
#include <fdtdec.h>
|
|
|
|
#include <asm/arch/gpio.h>
|
|
|
|
#include <asm/arch/pinmux.h>
|
|
|
|
#include <asm/arch/sromc.h>
|
|
|
|
|
|
|
|
static void exynos5_uart_config(int peripheral)
|
|
|
|
{
|
|
|
|
int i, start, count;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_UART0:
|
|
|
|
start = EXYNOS5_GPIO_A00;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART1:
|
|
|
|
start = EXYNOS5_GPIO_D00;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART2:
|
|
|
|
start = EXYNOS5_GPIO_A10;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART3:
|
|
|
|
start = EXYNOS5_GPIO_A14;
|
|
|
|
count = 2;
|
|
|
|
break;
|
arm: exynos: Squash bogus warnings in pinmux
Squash these warnings in pinmux.c found with GCC 4.8:
/arch/arm/cpu/armv7/exynos/pinmux.c: In function 'exynos_pinmux_config':
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'count' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:16: note: 'count' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:9: note: 'start' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:689:19: warning: 'bank' may be used uninitialized in this function [-Wmaybe-uninitialized]
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
^
/arch/arm/cpu/armv7/exynos/pinmux.c:662:24: note: 'bank' was declared here
struct s5p_gpio_bank *bank;
^
/arch/arm/cpu/armv7/exynos/pinmux.c: In function 'exynos_pinmux_config':
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'count' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:16: note: 'count' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:9: note: 'start' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:689:19: warning: 'bank' may be used uninitialized in this function [-Wmaybe-uninitialized]
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
^
/arch/arm/cpu/armv7/exynos/pinmux.c:662:24: note: 'bank' was declared here
struct s5p_gpio_bank *bank;
^
Note that the warning is bogus, the function can never be called with invalid
'peripheral' argument. GCC just cannot analyze this.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
11 years ago
|
|
|
default:
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
for (i = start; i < start + count; i++) {
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
|
|
|
|
gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void exynos5420_uart_config(int peripheral)
|
|
|
|
{
|
|
|
|
int i, start, count;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_UART0:
|
|
|
|
start = EXYNOS5420_GPIO_A00;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART1:
|
|
|
|
start = EXYNOS5420_GPIO_A04;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART2:
|
|
|
|
start = EXYNOS5420_GPIO_A10;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART3:
|
|
|
|
start = EXYNOS5420_GPIO_A14;
|
|
|
|
count = 2;
|
|
|
|
break;
|
arm: exynos: Squash bogus warnings in pinmux
Squash these warnings in pinmux.c found with GCC 4.8:
/arch/arm/cpu/armv7/exynos/pinmux.c: In function 'exynos_pinmux_config':
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'count' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:16: note: 'count' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:9: note: 'start' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:689:19: warning: 'bank' may be used uninitialized in this function [-Wmaybe-uninitialized]
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
^
/arch/arm/cpu/armv7/exynos/pinmux.c:662:24: note: 'bank' was declared here
struct s5p_gpio_bank *bank;
^
/arch/arm/cpu/armv7/exynos/pinmux.c: In function 'exynos_pinmux_config':
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'count' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:16: note: 'count' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:9: note: 'start' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:689:19: warning: 'bank' may be used uninitialized in this function [-Wmaybe-uninitialized]
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
^
/arch/arm/cpu/armv7/exynos/pinmux.c:662:24: note: 'bank' was declared here
struct s5p_gpio_bank *bank;
^
Note that the warning is bogus, the function can never be called with invalid
'peripheral' argument. GCC just cannot analyze this.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
11 years ago
|
|
|
default:
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = start; i < start + count; i++) {
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
|
|
|
|
gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int exynos5_mmc_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
int i, start, start_ext, gpio_func = 0;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_SDMMC0:
|
|
|
|
start = EXYNOS5_GPIO_C00;
|
|
|
|
start_ext = EXYNOS5_GPIO_C10;
|
|
|
|
gpio_func = S5P_GPIO_FUNC(0x2);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC1:
|
|
|
|
start = EXYNOS5_GPIO_C20;
|
|
|
|
start_ext = 0;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC2:
|
|
|
|
start = EXYNOS5_GPIO_C30;
|
|
|
|
start_ext = EXYNOS5_GPIO_C43;
|
|
|
|
gpio_func = S5P_GPIO_FUNC(0x3);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC3:
|
|
|
|
start = EXYNOS5_GPIO_C40;
|
|
|
|
start_ext = 0;
|
|
|
|
break;
|
arm: exynos: Squash bogus warnings in pinmux
Squash these warnings in pinmux.c found with GCC 4.8:
/arch/arm/cpu/armv7/exynos/pinmux.c: In function 'exynos_pinmux_config':
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'count' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:16: note: 'count' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:9: note: 'start' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:689:19: warning: 'bank' may be used uninitialized in this function [-Wmaybe-uninitialized]
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
^
/arch/arm/cpu/armv7/exynos/pinmux.c:662:24: note: 'bank' was declared here
struct s5p_gpio_bank *bank;
^
/arch/arm/cpu/armv7/exynos/pinmux.c: In function 'exynos_pinmux_config':
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'count' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:16: note: 'count' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:9: note: 'start' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:689:19: warning: 'bank' may be used uninitialized in this function [-Wmaybe-uninitialized]
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
^
/arch/arm/cpu/armv7/exynos/pinmux.c:662:24: note: 'bank' was declared here
struct s5p_gpio_bank *bank;
^
Note that the warning is bogus, the function can never be called with invalid
'peripheral' argument. GCC just cannot analyze this.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
11 years ago
|
|
|
default:
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) {
|
|
|
|
debug("SDMMC device %d does not support 8bit mode",
|
|
|
|
peripheral);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
if (flags & PINMUX_FLAG_8BIT_MODE) {
|
|
|
|
for (i = start_ext; i <= (start_ext + 3); i++) {
|
|
|
|
gpio_cfg_pin(i, gpio_func);
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_UP);
|
|
|
|
gpio_set_drv(i, S5P_GPIO_DRV_4X);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
for (i = start; i < (start + 2); i++) {
|
|
|
|
gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
|
|
|
|
gpio_set_drv(i, S5P_GPIO_DRV_4X);
|
|
|
|
}
|
|
|
|
for (i = (start + 3); i <= (start + 6); i++) {
|
|
|
|
gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_UP);
|
|
|
|
gpio_set_drv(i, S5P_GPIO_DRV_4X);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int exynos5420_mmc_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
int i, start = 0, start_ext = 0;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_SDMMC0:
|
|
|
|
start = EXYNOS5420_GPIO_C00;
|
|
|
|
start_ext = EXYNOS5420_GPIO_C30;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC1:
|
|
|
|
start = EXYNOS5420_GPIO_C10;
|
|
|
|
start_ext = EXYNOS5420_GPIO_D14;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC2:
|
|
|
|
start = EXYNOS5420_GPIO_C20;
|
|
|
|
start_ext = 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
start = 0;
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) {
|
|
|
|
debug("SDMMC device %d does not support 8bit mode",
|
|
|
|
peripheral);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (flags & PINMUX_FLAG_8BIT_MODE) {
|
|
|
|
for (i = start_ext; i <= (start_ext + 3); i++) {
|
|
|
|
gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_UP);
|
|
|
|
gpio_set_drv(i, S5P_GPIO_DRV_4X);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = start; i < (start + 3); i++) {
|
|
|
|
/*
|
|
|
|
* MMC0 is intended to be used for eMMC. The
|
|
|
|
* card detect pin is used as a VDDEN signal to
|
|
|
|
* power on the eMMC. The 5420 iROM makes
|
|
|
|
* this same assumption.
|
|
|
|
*/
|
|
|
|
if ((peripheral == PERIPH_ID_SDMMC0) && (i == (start + 2))) {
|
|
|
|
gpio_set_value(i, 1);
|
|
|
|
gpio_cfg_pin(i, S5P_GPIO_OUTPUT);
|
|
|
|
} else {
|
|
|
|
gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
|
|
|
|
}
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
|
|
|
|
gpio_set_drv(i, S5P_GPIO_DRV_4X);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = (start + 3); i <= (start + 6); i++) {
|
|
|
|
gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_UP);
|
|
|
|
gpio_set_drv(i, S5P_GPIO_DRV_4X);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void exynos5_sromc_config(int flags)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* SROM:CS1 and EBI
|
|
|
|
*
|
|
|
|
* GPY0[0] SROM_CSn[0]
|
|
|
|
* GPY0[1] SROM_CSn[1](2)
|
|
|
|
* GPY0[2] SROM_CSn[2]
|
|
|
|
* GPY0[3] SROM_CSn[3]
|
|
|
|
* GPY0[4] EBI_OEn(2)
|
|
|
|
* GPY0[5] EBI_EEn(2)
|
|
|
|
*
|
|
|
|
* GPY1[0] EBI_BEn[0](2)
|
|
|
|
* GPY1[1] EBI_BEn[1](2)
|
|
|
|
* GPY1[2] SROM_WAIT(2)
|
|
|
|
* GPY1[3] EBI_DATA_RDn(2)
|
|
|
|
*/
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_Y00 + (flags & PINMUX_FLAG_BANK),
|
|
|
|
S5P_GPIO_FUNC(2));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_Y04, S5P_GPIO_FUNC(2));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_Y05, S5P_GPIO_FUNC(2));
|
|
|
|
|
|
|
|
for (i = 0; i < 4; i++)
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_Y10 + i, S5P_GPIO_FUNC(2));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* EBI: 8 Addrss Lines
|
|
|
|
*
|
|
|
|
* GPY3[0] EBI_ADDR[0](2)
|
|
|
|
* GPY3[1] EBI_ADDR[1](2)
|
|
|
|
* GPY3[2] EBI_ADDR[2](2)
|
|
|
|
* GPY3[3] EBI_ADDR[3](2)
|
|
|
|
* GPY3[4] EBI_ADDR[4](2)
|
|
|
|
* GPY3[5] EBI_ADDR[5](2)
|
|
|
|
* GPY3[6] EBI_ADDR[6](2)
|
|
|
|
* GPY3[7] EBI_ADDR[7](2)
|
|
|
|
*
|
|
|
|
* EBI: 16 Data Lines
|
|
|
|
*
|
|
|
|
* GPY5[0] EBI_DATA[0](2)
|
|
|
|
* GPY5[1] EBI_DATA[1](2)
|
|
|
|
* GPY5[2] EBI_DATA[2](2)
|
|
|
|
* GPY5[3] EBI_DATA[3](2)
|
|
|
|
* GPY5[4] EBI_DATA[4](2)
|
|
|
|
* GPY5[5] EBI_DATA[5](2)
|
|
|
|
* GPY5[6] EBI_DATA[6](2)
|
|
|
|
* GPY5[7] EBI_DATA[7](2)
|
|
|
|
*
|
|
|
|
* GPY6[0] EBI_DATA[8](2)
|
|
|
|
* GPY6[1] EBI_DATA[9](2)
|
|
|
|
* GPY6[2] EBI_DATA[10](2)
|
|
|
|
* GPY6[3] EBI_DATA[11](2)
|
|
|
|
* GPY6[4] EBI_DATA[12](2)
|
|
|
|
* GPY6[5] EBI_DATA[13](2)
|
|
|
|
* GPY6[6] EBI_DATA[14](2)
|
|
|
|
* GPY6[7] EBI_DATA[15](2)
|
|
|
|
*/
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_Y30 + i, S5P_GPIO_FUNC(2));
|
|
|
|
gpio_set_pull(EXYNOS5_GPIO_Y30 + i, S5P_GPIO_PULL_UP);
|
|
|
|
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_Y50 + i, S5P_GPIO_FUNC(2));
|
|
|
|
gpio_set_pull(EXYNOS5_GPIO_Y50 + i, S5P_GPIO_PULL_UP);
|
|
|
|
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_Y60 + i, S5P_GPIO_FUNC(2));
|
|
|
|
gpio_set_pull(EXYNOS5_GPIO_Y60 + i, S5P_GPIO_PULL_UP);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void exynos5_i2c_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_I2C0:
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_B30, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_B31, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C1:
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_B32, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_B33, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C2:
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_A06, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_A07, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C3:
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_A12, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_A13, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C4:
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_A20, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_A21, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C5:
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_A22, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_A23, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C6:
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_B13, S5P_GPIO_FUNC(0x4));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_B14, S5P_GPIO_FUNC(0x4));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C7:
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_B22, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_B23, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void exynos5420_i2c_config(int peripheral)
|
|
|
|
{
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_I2C0:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B30, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B31, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C1:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B32, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B33, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C2:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_A06, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_A07, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C3:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_A12, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_A13, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C4:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_A20, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_A21, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C5:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_A22, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_A23, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C6:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B13, S5P_GPIO_FUNC(0x4));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B14, S5P_GPIO_FUNC(0x4));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C7:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B22, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B23, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C8:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B34, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B35, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C9:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B36, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B37, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C10:
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B40, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_B41, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void exynos5_i2s_config(int peripheral)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_I2S0:
|
|
|
|
for (i = 0; i < 5; i++)
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_Z0 + i, S5P_GPIO_FUNC(0x02));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2S1:
|
|
|
|
for (i = 0; i < 5; i++)
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_B00 + i, S5P_GPIO_FUNC(0x02));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void exynos5_spi_config(int peripheral)
|
|
|
|
{
|
|
|
|
int cfg = 0, pin = 0, i;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_SPI0:
|
|
|
|
cfg = S5P_GPIO_FUNC(0x2);
|
|
|
|
pin = EXYNOS5_GPIO_A20;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SPI1:
|
|
|
|
cfg = S5P_GPIO_FUNC(0x2);
|
|
|
|
pin = EXYNOS5_GPIO_A24;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SPI2:
|
|
|
|
cfg = S5P_GPIO_FUNC(0x5);
|
|
|
|
pin = EXYNOS5_GPIO_B11;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SPI3:
|
|
|
|
cfg = S5P_GPIO_FUNC(0x2);
|
|
|
|
pin = EXYNOS5_GPIO_F10;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SPI4:
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_F02 + i, S5P_GPIO_FUNC(0x4));
|
|
|
|
gpio_cfg_pin(EXYNOS5_GPIO_E04 + i, S5P_GPIO_FUNC(0x4));
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (peripheral != PERIPH_ID_SPI4) {
|
|
|
|
for (i = pin; i < pin + 4; i++)
|
|
|
|
gpio_cfg_pin(i, cfg);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void exynos5420_spi_config(int peripheral)
|
|
|
|
{
|
|
|
|
int cfg, pin, i;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_SPI0:
|
|
|
|
pin = EXYNOS5420_GPIO_A20;
|
|
|
|
cfg = S5P_GPIO_FUNC(0x2);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SPI1:
|
|
|
|
pin = EXYNOS5420_GPIO_A24;
|
|
|
|
cfg = S5P_GPIO_FUNC(0x2);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SPI2:
|
|
|
|
pin = EXYNOS5420_GPIO_B11;
|
|
|
|
cfg = S5P_GPIO_FUNC(0x5);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SPI3:
|
|
|
|
pin = EXYNOS5420_GPIO_F10;
|
|
|
|
cfg = S5P_GPIO_FUNC(0x2);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SPI4:
|
|
|
|
cfg = 0;
|
|
|
|
pin = 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
cfg = 0;
|
|
|
|
pin = 0;
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (peripheral != PERIPH_ID_SPI4) {
|
|
|
|
for (i = pin; i < pin + 4; i++)
|
|
|
|
gpio_cfg_pin(i, cfg);
|
|
|
|
} else {
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_F02 + i,
|
|
|
|
S5P_GPIO_FUNC(0x4));
|
|
|
|
gpio_cfg_pin(EXYNOS5420_GPIO_E04 + i,
|
|
|
|
S5P_GPIO_FUNC(0x4));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int exynos5_pinmux_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_UART0:
|
|
|
|
case PERIPH_ID_UART1:
|
|
|
|
case PERIPH_ID_UART2:
|
|
|
|
case PERIPH_ID_UART3:
|
|
|
|
exynos5_uart_config(peripheral);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC0:
|
|
|
|
case PERIPH_ID_SDMMC1:
|
|
|
|
case PERIPH_ID_SDMMC2:
|
|
|
|
case PERIPH_ID_SDMMC3:
|
|
|
|
return exynos5_mmc_config(peripheral, flags);
|
|
|
|
case PERIPH_ID_SROMC:
|
|
|
|
exynos5_sromc_config(flags);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C0:
|
|
|
|
case PERIPH_ID_I2C1:
|
|
|
|
case PERIPH_ID_I2C2:
|
|
|
|
case PERIPH_ID_I2C3:
|
|
|
|
case PERIPH_ID_I2C4:
|
|
|
|
case PERIPH_ID_I2C5:
|
|
|
|
case PERIPH_ID_I2C6:
|
|
|
|
case PERIPH_ID_I2C7:
|
|
|
|
exynos5_i2c_config(peripheral, flags);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2S0:
|
|
|
|
case PERIPH_ID_I2S1:
|
|
|
|
exynos5_i2s_config(peripheral);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SPI0:
|
|
|
|
case PERIPH_ID_SPI1:
|
|
|
|
case PERIPH_ID_SPI2:
|
|
|
|
case PERIPH_ID_SPI3:
|
|
|
|
case PERIPH_ID_SPI4:
|
|
|
|
exynos5_spi_config(peripheral);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int exynos5420_pinmux_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_UART0:
|
|
|
|
case PERIPH_ID_UART1:
|
|
|
|
case PERIPH_ID_UART2:
|
|
|
|
case PERIPH_ID_UART3:
|
|
|
|
exynos5420_uart_config(peripheral);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC0:
|
|
|
|
case PERIPH_ID_SDMMC1:
|
|
|
|
case PERIPH_ID_SDMMC2:
|
|
|
|
case PERIPH_ID_SDMMC3:
|
|
|
|
return exynos5420_mmc_config(peripheral, flags);
|
|
|
|
case PERIPH_ID_SPI0:
|
|
|
|
case PERIPH_ID_SPI1:
|
|
|
|
case PERIPH_ID_SPI2:
|
|
|
|
case PERIPH_ID_SPI3:
|
|
|
|
case PERIPH_ID_SPI4:
|
|
|
|
exynos5420_spi_config(peripheral);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C0:
|
|
|
|
case PERIPH_ID_I2C1:
|
|
|
|
case PERIPH_ID_I2C2:
|
|
|
|
case PERIPH_ID_I2C3:
|
|
|
|
case PERIPH_ID_I2C4:
|
|
|
|
case PERIPH_ID_I2C5:
|
|
|
|
case PERIPH_ID_I2C6:
|
|
|
|
case PERIPH_ID_I2C7:
|
|
|
|
case PERIPH_ID_I2C8:
|
|
|
|
case PERIPH_ID_I2C9:
|
|
|
|
case PERIPH_ID_I2C10:
|
|
|
|
exynos5420_i2c_config(peripheral);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void exynos4_i2c_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_I2C0:
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_D10, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_D11, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C1:
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_D12, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_D13, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C2:
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_A06, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_A07, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C3:
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_A12, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_A13, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C4:
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_B2, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_B3, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C5:
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_B6, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_B7, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C6:
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_C13, S5P_GPIO_FUNC(0x4));
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_C14, S5P_GPIO_FUNC(0x4));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C7:
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_D02, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS4_GPIO_D03, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int exynos4_mmc_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
int i, start = 0, start_ext = 0;
|
|
|
|
unsigned int func, ext_func;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_SDMMC0:
|
|
|
|
start = EXYNOS4_GPIO_K00;
|
|
|
|
start_ext = EXYNOS4_GPIO_K13;
|
|
|
|
func = S5P_GPIO_FUNC(0x2);
|
|
|
|
ext_func = S5P_GPIO_FUNC(0x3);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC2:
|
|
|
|
start = EXYNOS4_GPIO_K20;
|
|
|
|
start_ext = EXYNOS4_GPIO_K33;
|
|
|
|
func = S5P_GPIO_FUNC(0x2);
|
|
|
|
ext_func = S5P_GPIO_FUNC(0x3);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC4:
|
|
|
|
start = EXYNOS4_GPIO_K00;
|
|
|
|
start_ext = EXYNOS4_GPIO_K13;
|
|
|
|
func = S5P_GPIO_FUNC(0x3);
|
|
|
|
ext_func = S5P_GPIO_FUNC(0x4);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
for (i = start; i < (start + 7); i++) {
|
|
|
|
if (i == (start + 2))
|
|
|
|
continue;
|
|
|
|
gpio_cfg_pin(i, func);
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
|
|
|
|
gpio_set_drv(i, S5P_GPIO_DRV_4X);
|
|
|
|
}
|
|
|
|
/* SDMMC2 do not use 8bit mode at exynos4 */
|
|
|
|
if (flags & PINMUX_FLAG_8BIT_MODE) {
|
|
|
|
for (i = start_ext; i < (start_ext + 4); i++) {
|
|
|
|
gpio_cfg_pin(i, ext_func);
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
|
|
|
|
gpio_set_drv(i, S5P_GPIO_DRV_4X);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void exynos4_uart_config(int peripheral)
|
|
|
|
{
|
|
|
|
int i, start, count;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_UART0:
|
|
|
|
start = EXYNOS4_GPIO_A00;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART1:
|
|
|
|
start = EXYNOS4_GPIO_A04;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART2:
|
|
|
|
start = EXYNOS4_GPIO_A10;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART3:
|
|
|
|
start = EXYNOS4_GPIO_A14;
|
|
|
|
count = 2;
|
|
|
|
break;
|
arm: exynos: Squash bogus warnings in pinmux
Squash these warnings in pinmux.c found with GCC 4.8:
/arch/arm/cpu/armv7/exynos/pinmux.c: In function 'exynos_pinmux_config':
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'count' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:16: note: 'count' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:9: note: 'start' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:689:19: warning: 'bank' may be used uninitialized in this function [-Wmaybe-uninitialized]
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
^
/arch/arm/cpu/armv7/exynos/pinmux.c:662:24: note: 'bank' was declared here
struct s5p_gpio_bank *bank;
^
/arch/arm/cpu/armv7/exynos/pinmux.c: In function 'exynos_pinmux_config':
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'count' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:16: note: 'count' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:687:28: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
for (i = start; i < start + count; i++) {
^
/arch/arm/cpu/armv7/exynos/pinmux.c:663:9: note: 'start' was declared here
int i, start, count;
^
/arch/arm/cpu/armv7/exynos/pinmux.c:689:19: warning: 'bank' may be used uninitialized in this function [-Wmaybe-uninitialized]
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
^
/arch/arm/cpu/armv7/exynos/pinmux.c:662:24: note: 'bank' was declared here
struct s5p_gpio_bank *bank;
^
Note that the warning is bogus, the function can never be called with invalid
'peripheral' argument. GCC just cannot analyze this.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
11 years ago
|
|
|
default:
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
for (i = start; i < (start + count); i++) {
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
|
|
|
|
gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void exynos4x12_i2c_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_I2C0:
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_D10, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_D11, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C1:
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_D12, S5P_GPIO_FUNC(0x2));
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_D13, S5P_GPIO_FUNC(0x2));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C2:
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_A06, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_A07, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C3:
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_A12, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_A13, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C4:
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_B2, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_B3, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C5:
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_B6, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_B7, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C6:
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_C13, S5P_GPIO_FUNC(0x4));
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_C14, S5P_GPIO_FUNC(0x4));
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C7:
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_D02, S5P_GPIO_FUNC(0x3));
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_D03, S5P_GPIO_FUNC(0x3));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int exynos4x12_mmc_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
int i, start = 0, start_ext = 0;
|
|
|
|
unsigned int func, ext_func;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_SDMMC0:
|
|
|
|
start = EXYNOS4X12_GPIO_K00;
|
|
|
|
start_ext = EXYNOS4X12_GPIO_K13;
|
|
|
|
func = S5P_GPIO_FUNC(0x2);
|
|
|
|
ext_func = S5P_GPIO_FUNC(0x3);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC2:
|
|
|
|
start = EXYNOS4X12_GPIO_K20;
|
|
|
|
start_ext = EXYNOS4X12_GPIO_K33;
|
|
|
|
func = S5P_GPIO_FUNC(0x2);
|
|
|
|
ext_func = S5P_GPIO_FUNC(0x3);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC4:
|
|
|
|
start = EXYNOS4_GPIO_K00;
|
|
|
|
start_ext = EXYNOS4_GPIO_K13;
|
|
|
|
func = S5P_GPIO_FUNC(0x3);
|
|
|
|
ext_func = S5P_GPIO_FUNC(0x4);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
for (i = start; i < (start + 7); i++) {
|
|
|
|
if (i == (start + 2))
|
|
|
|
continue;
|
|
|
|
gpio_cfg_pin(i, func);
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
|
|
|
|
gpio_set_drv(i, S5P_GPIO_DRV_4X);
|
|
|
|
}
|
|
|
|
if (flags & PINMUX_FLAG_8BIT_MODE) {
|
|
|
|
for (i = start_ext; i < (start_ext + 4); i++) {
|
|
|
|
gpio_cfg_pin(i, ext_func);
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
|
|
|
|
gpio_set_drv(i, S5P_GPIO_DRV_4X);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void exynos4x12_uart_config(int peripheral)
|
|
|
|
{
|
|
|
|
int i, start, count;
|
|
|
|
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_UART0:
|
|
|
|
start = EXYNOS4X12_GPIO_A00;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART1:
|
|
|
|
start = EXYNOS4X12_GPIO_A04;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART2:
|
|
|
|
start = EXYNOS4X12_GPIO_A10;
|
|
|
|
count = 4;
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_UART3:
|
|
|
|
start = EXYNOS4X12_GPIO_A14;
|
|
|
|
count = 2;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
for (i = start; i < (start + count); i++) {
|
|
|
|
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
|
|
|
|
gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int exynos4_pinmux_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_UART0:
|
|
|
|
case PERIPH_ID_UART1:
|
|
|
|
case PERIPH_ID_UART2:
|
|
|
|
case PERIPH_ID_UART3:
|
|
|
|
exynos4_uart_config(peripheral);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C0:
|
|
|
|
case PERIPH_ID_I2C1:
|
|
|
|
case PERIPH_ID_I2C2:
|
|
|
|
case PERIPH_ID_I2C3:
|
|
|
|
case PERIPH_ID_I2C4:
|
|
|
|
case PERIPH_ID_I2C5:
|
|
|
|
case PERIPH_ID_I2C6:
|
|
|
|
case PERIPH_ID_I2C7:
|
|
|
|
exynos4_i2c_config(peripheral, flags);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC0:
|
|
|
|
case PERIPH_ID_SDMMC2:
|
|
|
|
case PERIPH_ID_SDMMC4:
|
|
|
|
return exynos4_mmc_config(peripheral, flags);
|
|
|
|
case PERIPH_ID_SDMMC1:
|
|
|
|
case PERIPH_ID_SDMMC3:
|
|
|
|
debug("SDMMC device %d not implemented\n", peripheral);
|
|
|
|
return -1;
|
|
|
|
default:
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int exynos4x12_pinmux_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
switch (peripheral) {
|
|
|
|
case PERIPH_ID_UART0:
|
|
|
|
case PERIPH_ID_UART1:
|
|
|
|
case PERIPH_ID_UART2:
|
|
|
|
case PERIPH_ID_UART3:
|
|
|
|
exynos4x12_uart_config(peripheral);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_I2C0:
|
|
|
|
case PERIPH_ID_I2C1:
|
|
|
|
case PERIPH_ID_I2C2:
|
|
|
|
case PERIPH_ID_I2C3:
|
|
|
|
case PERIPH_ID_I2C4:
|
|
|
|
case PERIPH_ID_I2C5:
|
|
|
|
case PERIPH_ID_I2C6:
|
|
|
|
case PERIPH_ID_I2C7:
|
|
|
|
exynos4x12_i2c_config(peripheral, flags);
|
|
|
|
break;
|
|
|
|
case PERIPH_ID_SDMMC0:
|
|
|
|
case PERIPH_ID_SDMMC2:
|
|
|
|
case PERIPH_ID_SDMMC4:
|
|
|
|
return exynos4x12_mmc_config(peripheral, flags);
|
|
|
|
case PERIPH_ID_SDMMC1:
|
|
|
|
case PERIPH_ID_SDMMC3:
|
|
|
|
debug("SDMMC device %d not implemented\n", peripheral);
|
|
|
|
return -1;
|
|
|
|
default:
|
|
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int exynos_pinmux_config(int peripheral, int flags)
|
|
|
|
{
|
|
|
|
if (cpu_is_exynos5()) {
|
|
|
|
if (proid_is_exynos5420())
|
|
|
|
return exynos5420_pinmux_config(peripheral, flags);
|
|
|
|
else if (proid_is_exynos5250())
|
|
|
|
return exynos5_pinmux_config(peripheral, flags);
|
|
|
|
} else if (cpu_is_exynos4()) {
|
|
|
|
if (proid_is_exynos4412())
|
|
|
|
return exynos4x12_pinmux_config(peripheral, flags);
|
|
|
|
else
|
|
|
|
return exynos4_pinmux_config(peripheral, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
debug("pinmux functionality not supported\n");
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
|
|
static int exynos4_pinmux_decode_periph_id(const void *blob, int node)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u32 cell[3];
|
|
|
|
|
|
|
|
err = fdtdec_get_int_array(blob, node, "interrupts", cell,
|
|
|
|
ARRAY_SIZE(cell));
|
|
|
|
if (err) {
|
|
|
|
debug(" invalid peripheral id\n");
|
|
|
|
return PERIPH_ID_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
return cell[1];
|
|
|
|
}
|
|
|
|
|
|
|
|
static int exynos5_pinmux_decode_periph_id(const void *blob, int node)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
u32 cell[3];
|
|
|
|
|
|
|
|
err = fdtdec_get_int_array(blob, node, "interrupts", cell,
|
|
|
|
ARRAY_SIZE(cell));
|
|
|
|
if (err)
|
|
|
|
return PERIPH_ID_NONE;
|
|
|
|
|
|
|
|
return cell[1];
|
|
|
|
}
|
|
|
|
|
|
|
|
int pinmux_decode_periph_id(const void *blob, int node)
|
|
|
|
{
|
|
|
|
if (cpu_is_exynos5())
|
|
|
|
return exynos5_pinmux_decode_periph_id(blob, node);
|
|
|
|
else if (cpu_is_exynos4())
|
|
|
|
return exynos4_pinmux_decode_periph_id(blob, node);
|
|
|
|
|
|
|
|
return PERIPH_ID_NONE;
|
|
|
|
}
|
|
|
|
#endif
|