upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
251 lines
8.1 KiB
251 lines
8.1 KiB
23 years ago
|
/*
|
||
|
|
* (C) Copyright 2000
|
||
|
|
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
|
||
|
|
*
|
||
|
|
* See file CREDITS for list of people who contributed to this
|
||
|
|
* project.
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or
|
||
|
|
* modify it under the terms of the GNU General Public License as
|
||
|
|
* published by the Free Software Foundation; either version 2 of
|
||
|
|
* the License, or (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* You should have received a copy of the GNU General Public License
|
||
|
|
* along with this program; if not, write to the Free Software
|
||
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
|
* MA 02111-1307 USA
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef _NS87308_H_
|
||
|
|
#define _NS87308_H_
|
||
|
|
|
||
|
|
#include <asm/pci_io.h>
|
||
|
|
|
||
|
|
/* Note: I couldn't find a full data sheet for the ns87308, but the ns87307 seems to be pretty
|
||
|
|
functionally- (and pin-) equivalent to the 87308, but the 308 has better ir support. */
|
||
|
|
|
||
|
|
void initialise_ns87308(void);
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The following struct represents the GPIO registers on the NS87308/NS97307
|
||
|
|
*/
|
||
|
|
struct GPIO
|
||
|
|
{
|
||
|
|
unsigned char dta1; /* 0 data port 1 */
|
||
|
|
unsigned char dir1; /* 1 direction port 1 */
|
||
|
|
unsigned char out1; /* 2 output type port 1 */
|
||
|
|
unsigned char puc1; /* 3 pull-up control port 1 */
|
||
|
|
unsigned char dta2; /* 4 data port 2 */
|
||
|
|
unsigned char dir2; /* 5 direction port 2 */
|
||
|
|
unsigned char out2; /* 6 output type port 2 */
|
||
|
|
unsigned char puc2; /* 7 pull-up control port 2 */
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The following represents the power management registers on the NS87308/NS97307
|
||
|
|
*/
|
||
|
|
#define PWM_FER1 0 /* 0 function enable reg. 1 */
|
||
|
|
#define PWM_FER2 1 /* 1 function enable reg. 2 */
|
||
|
|
#define PWM_PMC1 2 /* 2 power mgmt. control 1 */
|
||
|
|
#define PWM_PMC2 3 /* 3 power mgmt. control 2 */
|
||
|
|
#define PWM_PMC3 4 /* 4 power mgmt. control 3 */
|
||
|
|
#define PWM_WDTO 5 /* 5 watchdog time-out */
|
||
|
|
#define PWM_WDCF 6 /* 6 watchdog config. */
|
||
|
|
#define PWM_WDST 7 /* 7 watchdog status */
|
||
|
|
|
||
|
|
/*PNP config registers:
|
||
|
|
* these depend on the stated of BADDR1 and BADDR0 on startup
|
||
|
|
* so there's three versions here with the last two digits indicating
|
||
|
|
* for which configuration their valid
|
||
|
|
* the 1st of the two digits indicates the state of BADDR1
|
||
|
|
* the 2st of the two digits indicates the state of BADDR0
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
#define IO_INDEX_OFFSET_0x 0x0279 /* full PnP isa Mode */
|
||
|
|
#define IO_INDEX_OFFSET_10 0x015C /* PnP motherboard mode */
|
||
|
|
#define IO_INDEX_OFFSET_11 0x002E /* PnP motherboard mode */
|
||
|
|
#define IO_DATA_OFFSET_0x 0x0A79 /* full PnP isa Mode */
|
||
|
|
#define IO_DATA_OFFSET_10 0x015D /* PnP motherboard mode */
|
||
|
|
#define IO_DATA_OFFSET_11 0x002F /* PnP motherboard mode */
|
||
|
|
|
||
|
|
#if defined(CFG_NS87308_BADDR_0x)
|
||
|
|
#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_0x)
|
||
|
|
#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_0x)
|
||
|
|
#elif defined(CFG_NS87308_BADDR_10)
|
||
|
|
#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_10)
|
||
|
|
#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_10)
|
||
|
|
#elif defined(CFG_NS87308_BADDR_11)
|
||
|
|
#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_11)
|
||
|
|
#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_11)
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* PnP register definitions */
|
||
|
|
|
||
|
|
#define SET_RD_DATA_PORT 0x00
|
||
|
|
#define SERIAL_ISOLATION 0x01
|
||
|
|
#define CONFIG_CONTROL 0x02
|
||
|
|
#define WAKE_CSN 0x03
|
||
|
|
#define RES_DATA 0x04
|
||
|
|
#define STATUS 0x05
|
||
|
|
#define SET_CSN 0x06
|
||
|
|
#define LOGICAL_DEVICE 0x07
|
||
|
|
|
||
|
|
/*vendor defined values */
|
||
|
|
#define SID_REG 0x20
|
||
|
|
#define SUPOERIO_CONF1 0x21
|
||
|
|
#define SUPOERIO_CONF2 0x22
|
||
|
|
#define PGCS_INDEX 0x23
|
||
|
|
#define PGCS_DATA 0x24
|
||
|
|
|
||
|
|
/* values above 30 are different for each logical device
|
||
|
|
but I can't be arsed to enter them all. the ones here
|
||
|
|
are pretty consistent between all logical devices
|
||
|
|
feel free to correct the situation if you want.. ;)
|
||
|
|
*/
|
||
|
|
#define ACTIVATE 0x30
|
||
|
|
#define ACTIVATE_OFF 0x00
|
||
|
|
#define ACTIVATE_ON 0x01
|
||
|
|
|
||
|
|
#define BASE_ADDR_HIGH 0x60
|
||
|
|
#define BASE_ADDR_LOW 0x61
|
||
|
|
#define LUN_CONFIG_REG 0xF0
|
||
|
|
#define DBASE_HIGH 0x60 /* SIO KBC data base address, 15:8 */
|
||
|
|
#define DBASE_LOW 0x61 /* SIO KBC data base address, 7:0 */
|
||
|
|
#define CBASE_HIGH 0x62 /* SIO KBC command base addr, 15:8 */
|
||
|
|
#define CBASE_LOW 0x63 /* SIO KBC command base addr, 7:0 */
|
||
|
|
|
||
|
|
/* the logical devices*/
|
||
|
|
#define LDEV_KBC1 0x00 /* 2 devices for keyboard and mouse controller*/
|
||
|
|
#define LDEV_KBC2 0x01
|
||
|
|
#define LDEV_MOUSE 0x01
|
||
|
|
#define LDEV_RTC_APC 0x02 /*Real Time Clock and Advanced Power Control*/
|
||
|
|
#define LDEV_FDC 0x03 /*floppy disk controller*/
|
||
|
|
#define LDEV_PARP 0x04 /*Parallel port*/
|
||
|
|
#define LDEV_UART2 0x05
|
||
|
|
#define LDEV_UART1 0x06
|
||
|
|
#define LDEV_GPIO 0x07 /*General Purpose IO and chip select output signals*/
|
||
|
|
#define LDEV_POWRMAN 0x08 /*Power Managment*/
|
||
|
|
|
||
|
|
#define CFG_NS87308_KBC1 (1 << LDEV_KBC1)
|
||
|
|
#define CFG_NS87308_KBC2 (1 << LDEV_KBC2)
|
||
|
|
#define CFG_NS87308_MOUSE (1 << LDEV_MOUSE)
|
||
|
|
#define CFG_NS87308_RTC_APC (1 << LDEV_RTC_APC)
|
||
|
|
#define CFG_NS87308_FDC (1 << LDEV_FDC)
|
||
|
|
#define CFG_NS87308_PARP (1 << LDEV_PARP)
|
||
|
|
#define CFG_NS87308_UART2 (1 << LDEV_UART2)
|
||
|
|
#define CFG_NS87308_UART1 (1 << LDEV_UART1)
|
||
|
|
#define CFG_NS87308_GPIO (1 << LDEV_GPIO)
|
||
|
|
#define CFG_NS87308_POWRMAN (1 << LDEV_POWRMAN)
|
||
|
|
|
||
|
|
/*some functions and macro's for doing configuration */
|
||
|
|
|
||
|
|
static inline void read_pnp_config(unsigned char index, unsigned char *data)
|
||
|
|
{
|
||
|
|
pci_writeb(index,IO_INDEX);
|
||
|
|
pci_readb(IO_DATA, *data);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void write_pnp_config(unsigned char index, unsigned char data)
|
||
|
|
{
|
||
|
|
pci_writeb(index,IO_INDEX);
|
||
|
|
pci_writeb(data, IO_DATA);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void pnp_set_device(unsigned char dev)
|
||
|
|
{
|
||
|
|
write_pnp_config(LOGICAL_DEVICE, dev);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void write_pm_reg(unsigned short base, unsigned char index, unsigned char data)
|
||
|
|
{
|
||
|
|
pci_writeb(index, CFG_ISA_IO + base);
|
||
|
|
eieio();
|
||
|
|
pci_writeb(data, CFG_ISA_IO + base + 1);
|
||
|
|
}
|
||
|
|
|
||
|
|
/*void write_pnp_config(unsigned char index, unsigned char data);
|
||
|
|
void pnp_set_device(unsigned char dev);
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define PNP_SET_DEVICE_BASE(dev,base) \
|
||
|
|
pnp_set_device(dev); \
|
||
|
|
write_pnp_config(ACTIVATE, ACTIVATE_OFF); \
|
||
|
|
write_pnp_config(BASE_ADDR_HIGH, ((base) >> 8) & 0xff ); \
|
||
|
|
write_pnp_config(BASE_ADDR_LOW, (base) &0xff); \
|
||
|
|
write_pnp_config(ACTIVATE, ACTIVATE_ON);
|
||
|
|
|
||
|
|
#define PNP_ACTIVATE_DEVICE(dev) \
|
||
|
|
pnp_set_device(dev); \
|
||
|
|
write_pnp_config(ACTIVATE, ACTIVATE_ON);
|
||
|
|
|
||
|
|
#define PNP_DEACTIVATE_DEVICE(dev) \
|
||
|
|
pnp_set_device(dev); \
|
||
|
|
write_pnp_config(ACTIVATE, ACTIVATE_OFF);
|
||
|
|
|
||
|
|
|
||
|
|
static inline void write_pgcs_config(unsigned char index, unsigned char data)
|
||
|
|
{
|
||
|
|
write_pnp_config(PGCS_INDEX, index);
|
||
|
|
write_pnp_config(PGCS_DATA, data);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* these macrose configure the 3 CS lines
|
||
|
|
on the sandpoint board these controll NVRAM
|
||
|
|
CS0 is connected to NVRAMCS
|
||
|
|
CS1 is connected to NVRAMAS0
|
||
|
|
CS2 is connected to NVRAMAS1
|
||
|
|
*/
|
||
|
|
#define PGCS_CS_ASSERT_ON_WRITE 0x10
|
||
|
|
#define PGCS_CS_ASSERT_ON_READ 0x20
|
||
|
|
|
||
|
|
#define PNP_PGCS_CSLINE_BASE(cs, base) \
|
||
|
|
write_pgcs_config((cs) << 2, ((base) >> 8) & 0xff ); \
|
||
|
|
write_pgcs_config(((cs) << 2) + 1, (base) & 0xff );
|
||
|
|
|
||
|
|
#define PNP_PGCS_CSLINE_CONF(cs, conf) \
|
||
|
|
write_pgcs_config(((cs) << 2) + 2, (conf) );
|
||
|
|
|
||
|
|
|
||
|
|
/* The following sections are for 87308 extensions to the standard compoents it emulates */
|
||
|
|
|
||
|
|
/* extensions to 16550*/
|
||
|
|
|
||
|
|
#define MCR_MDSL_MSK 0xe0 /*mode select mask*/
|
||
|
|
#define MCR_MDSL_UART 0x00 /*uart, default*/
|
||
|
|
#define MCR_MDSL_SHRPIR 0x02 /*Sharp IR*/
|
||
|
|
#define MCR_MDSL_SIR 0x03 /*SIR*/
|
||
|
|
#define MCR_MDSL_CIR 0x06 /*Consumer IR*/
|
||
|
|
|
||
|
|
#define FCR_TXFTH0 0x10 /* these bits control threshod of data level in fifo */
|
||
|
|
#define FCR_TXFTH1 0x20 /* for interrupt trigger */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Default NS87308 configuration
|
||
|
|
*/
|
||
|
|
#ifndef CFG_NS87308_KBC1_BASE
|
||
|
|
#define CFG_NS87308_KBC1_BASE 0x0060
|
||
|
|
#endif
|
||
|
|
#ifndef CFG_NS87308_RTC_BASE
|
||
|
|
#define CFG_NS87308_RTC_BASE 0x0070
|
||
|
|
#endif
|
||
|
|
#ifndef CFG_NS87308_FDC_BASE
|
||
|
|
#define CFG_NS87308_FDC_BASE 0x03F0
|
||
|
|
#endif
|
||
|
|
#ifndef CFG_NS87308_LPT_BASE
|
||
|
|
#define CFG_NS87308_LPT_BASE 0x0278
|
||
|
|
#endif
|
||
|
|
#ifndef CFG_NS87308_UART1_BASE
|
||
|
|
#define CFG_NS87308_UART1_BASE 0x03F8
|
||
|
|
#endif
|
||
|
|
#ifndef CFG_NS87308_UART2_BASE
|
||
|
|
#define CFG_NS87308_UART2_BASE 0x02F8
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /*_NS87308_H_*/
|