upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/drivers/usb/musb/musb_hcd.c

824 lines
20 KiB

/*
* Mentor USB OTG Core host controller driver.
*
* Copyright (c) 2008 Texas Instruments
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Author: Thomas Abraham t-abraham@ti.com, Texas Instruments
*/
#include <common.h>
#include "musb_hcd.h"
/* MSC control transfers */
#define USB_MSC_BBB_RESET 0xFF
#define USB_MSC_BBB_GET_MAX_LUN 0xFE
/* Endpoint configuration information */
static struct musb_epinfo epinfo[3] = {
{MUSB_BULK_EP, 1, 512}, /* EP1 - Bluk Out - 512 Bytes */
{MUSB_BULK_EP, 0, 512}, /* EP1 - Bluk In - 512 Bytes */
{MUSB_INTR_EP, 0, 64} /* EP2 - Interrupt IN - 64 Bytes */
};
/*
* This function writes the data toggle value.
*/
static void write_toggle(struct usb_device *dev, u8 ep, u8 dir_out)
{
u16 toggle = usb_gettoggle(dev, ep, dir_out);
u16 csr;
if (dir_out) {
if (!toggle)
writew(MUSB_TXCSR_CLRDATATOG, &musbr->txcsr);
else {
csr = readw(&musbr->txcsr);
csr |= MUSB_TXCSR_H_WR_DATATOGGLE;
writew(csr, &musbr->txcsr);
csr |= (toggle << MUSB_TXCSR_H_DATATOGGLE_SHIFT);
writew(csr, &musbr->txcsr);
}
} else {
if (!toggle)
writew(MUSB_RXCSR_CLRDATATOG, &musbr->rxcsr);
else {
csr = readw(&musbr->rxcsr);
csr |= MUSB_RXCSR_H_WR_DATATOGGLE;
writew(csr, &musbr->rxcsr);
csr |= (toggle << MUSB_S_RXCSR_H_DATATOGGLE);
writew(csr, &musbr->rxcsr);
}
}
}
/*
* This function checks if RxStall has occured on the endpoint. If a RxStall
* has occured, the RxStall is cleared and 1 is returned. If RxStall has
* not occured, 0 is returned.
*/
static u8 check_stall(u8 ep, u8 dir_out)
{
u16 csr;
/* For endpoint 0 */
if (!ep) {
csr = readw(&musbr->txcsr);
if (csr & MUSB_CSR0_H_RXSTALL) {
csr &= ~MUSB_CSR0_H_RXSTALL;
writew(csr, &musbr->txcsr);
return 1;
}
} else { /* For non-ep0 */
if (dir_out) { /* is it tx ep */
csr = readw(&musbr->txcsr);
if (csr & MUSB_TXCSR_H_RXSTALL) {
csr &= ~MUSB_TXCSR_H_RXSTALL;
writew(csr, &musbr->txcsr);
return 1;
}
} else { /* is it rx ep */
csr = readw(&musbr->rxcsr);
if (csr & MUSB_RXCSR_H_RXSTALL) {
csr &= ~MUSB_RXCSR_H_RXSTALL;
writew(csr, &musbr->rxcsr);
return 1;
}
}
}
return 0;
}
/*
* waits until ep0 is ready. Returns 0 if ep is ready, -1 for timeout
* error and -2 for stall.
*/
static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
{
u16 csr;
int result = 1;
int timeout = CONFIG_MUSB_TIMEOUT;
while (result > 0) {
csr = readw(&musbr->txcsr);
if (csr & MUSB_CSR0_H_ERROR) {
csr &= ~MUSB_CSR0_H_ERROR;
writew(csr, &musbr->txcsr);
dev->status = USB_ST_CRC_ERR;
result = -1;
break;
}
switch (bit_mask) {
case MUSB_CSR0_TXPKTRDY:
if (!(csr & MUSB_CSR0_TXPKTRDY)) {
if (check_stall(MUSB_CONTROL_EP, 0)) {
dev->status = USB_ST_STALLED;
result = -2;
} else
result = 0;
}
break;
case MUSB_CSR0_RXPKTRDY:
if (check_stall(MUSB_CONTROL_EP, 0)) {
dev->status = USB_ST_STALLED;
result = -2;
} else
if (csr & MUSB_CSR0_RXPKTRDY)
result = 0;
break;
case MUSB_CSR0_H_REQPKT:
if (!(csr & MUSB_CSR0_H_REQPKT)) {
if (check_stall(MUSB_CONTROL_EP, 0)) {
dev->status = USB_ST_STALLED;
result = -2;
} else
result = 0;
}
break;
}
/* Check the timeout */
if (--timeout)
udelay(1);
else {
dev->status = USB_ST_CRC_ERR;
result = -1;
break;
}
}
return result;
}
/*
* waits until tx ep is ready. Returns 1 when ep is ready and 0 on error.
*/
static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
{
u16 csr;
int timeout = CONFIG_MUSB_TIMEOUT;
do {
if (check_stall(ep, 1)) {
dev->status = USB_ST_STALLED;
return 0;
}
csr = readw(&musbr->txcsr);
if (csr & MUSB_TXCSR_H_ERROR) {
dev->status = USB_ST_CRC_ERR;
return 0;
}
/* Check the timeout */
if (--timeout)
udelay(1);
else {
dev->status = USB_ST_CRC_ERR;
return -1;
}
} while (csr & MUSB_TXCSR_TXPKTRDY);
return 1;
}
/*
* waits until rx ep is ready. Returns 1 when ep is ready and 0 on error.
*/
static u8 wait_until_rxep_ready(struct usb_device *dev, u8 ep)
{
u16 csr;
int timeout = CONFIG_MUSB_TIMEOUT;
do {
if (check_stall(ep, 0)) {
dev->status = USB_ST_STALLED;
return 0;
}
csr = readw(&musbr->rxcsr);
if (csr & MUSB_RXCSR_H_ERROR) {
dev->status = USB_ST_CRC_ERR;
return 0;
}
/* Check the timeout */
if (--timeout)
udelay(1);
else {
dev->status = USB_ST_CRC_ERR;
return -1;
}
} while (!(csr & MUSB_RXCSR_RXPKTRDY));
return 1;
}
/*
* This function performs the setup phase of the control transfer
*/
static int ctrlreq_setup_phase(struct usb_device *dev, struct devrequest *setup)
{
int result;
u16 csr;
/* write the control request to ep0 fifo */
write_fifo(MUSB_CONTROL_EP, sizeof(struct devrequest), (void *)setup);
/* enable transfer of setup packet */
csr = readw(&musbr->txcsr);
csr |= (MUSB_CSR0_TXPKTRDY|MUSB_CSR0_H_SETUPPKT);
writew(csr, &musbr->txcsr);
/* wait until the setup packet is transmitted */
result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
dev->act_len = 0;
return result;
}
/*
* This function handles the control transfer in data phase
*/
static int ctrlreq_in_data_phase(struct usb_device *dev, u32 len, void *buffer)
{
u16 csr;
u32 rxlen = 0;
u32 nextlen = 0;
u8 maxpktsize = (1 << dev->maxpacketsize) * 8;
u8 *rxbuff = (u8 *)buffer;
u8 rxedlength;
int result;
while (rxlen < len) {
/* Determine the next read length */
nextlen = ((len-rxlen) > maxpktsize) ? maxpktsize : (len-rxlen);
/* Set the ReqPkt bit */
csr = readw(&musbr->txcsr);
writew(csr | MUSB_CSR0_H_REQPKT, &musbr->txcsr);
result = wait_until_ep0_ready(dev, MUSB_CSR0_RXPKTRDY);
if (result < 0)
return result;
/* Actual number of bytes received by usb */
rxedlength = readb(&musbr->rxcount);
/* Read the data from the RxFIFO */
read_fifo(MUSB_CONTROL_EP, rxedlength, &rxbuff[rxlen]);
/* Clear the RxPktRdy Bit */
csr = readw(&musbr->txcsr);
csr &= ~MUSB_CSR0_RXPKTRDY;
writew(csr, &musbr->txcsr);
/* short packet? */
if (rxedlength != nextlen) {
dev->act_len += rxedlength;
break;
}
rxlen += nextlen;
dev->act_len = rxlen;
}
return 0;
}
/*
* This function handles the control transfer out data phase
*/
static int ctrlreq_out_data_phase(struct usb_device *dev, u32 len, void *buffer)
{
u16 csr;
u32 txlen = 0;
u32 nextlen = 0;
u8 maxpktsize = (1 << dev->maxpacketsize) * 8;
u8 *txbuff = (u8 *)buffer;
int result = 0;
while (txlen < len) {
/* Determine the next write length */
nextlen = ((len-txlen) > maxpktsize) ? maxpktsize : (len-txlen);
/* Load the data to send in FIFO */
write_fifo(MUSB_CONTROL_EP, txlen, &txbuff[txlen]);
/* Set TXPKTRDY bit */
csr = readw(&musbr->txcsr);
writew(csr | MUSB_CSR0_H_DIS_PING | MUSB_CSR0_TXPKTRDY,
&musbr->txcsr);
result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
if (result < 0)
break;
txlen += nextlen;
dev->act_len = txlen;
}
return result;
}
/*
* This function handles the control transfer out status phase
*/
static int ctrlreq_out_status_phase(struct usb_device *dev)
{
u16 csr;
int result;
/* Set the StatusPkt bit */
csr = readw(&musbr->txcsr);
csr |= (MUSB_CSR0_H_DIS_PING | MUSB_CSR0_TXPKTRDY |
MUSB_CSR0_H_STATUSPKT);
writew(csr, &musbr->txcsr);
/* Wait until TXPKTRDY bit is cleared */
result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
return result;
}
/*
* This function handles the control transfer in status phase
*/
static int ctrlreq_in_status_phase(struct usb_device *dev)
{
u16 csr;
int result;
/* Set the StatusPkt bit and ReqPkt bit */
csr = MUSB_CSR0_H_DIS_PING | MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT;
writew(csr, &musbr->txcsr);
result = wait_until_ep0_ready(dev, MUSB_CSR0_H_REQPKT);
/* clear StatusPkt bit and RxPktRdy bit */
csr = readw(&musbr->txcsr);
csr &= ~(MUSB_CSR0_RXPKTRDY | MUSB_CSR0_H_STATUSPKT);
writew(csr, &musbr->txcsr);
return result;
}
/*
* determines the speed of the device (High/Full/Slow)
*/
static u8 get_dev_speed(struct usb_device *dev)
{
return (dev->speed & USB_SPEED_HIGH) ? MUSB_TYPE_SPEED_HIGH :
((dev->speed & USB_SPEED_LOW) ? MUSB_TYPE_SPEED_LOW :
MUSB_TYPE_SPEED_FULL);
}
/*
* configure the hub address and the port address.
*/
static void config_hub_port(struct usb_device *dev, u8 ep)
{
u8 chid;
u8 hub;
/* Find out the nearest parent which is high speed */
while (dev->parent->parent != NULL)
if (get_dev_speed(dev->parent) != MUSB_TYPE_SPEED_HIGH)
dev = dev->parent;
else
break;
/* determine the port address at that hub */
hub = dev->parent->devnum;
for (chid = 0; chid < USB_MAXCHILDREN; chid++)
if (dev->parent->children[chid] == dev)
break;
/* configure the hub address and the port address */
writeb(hub, &musbr->tar[ep].txhubaddr);
writeb((chid + 1), &musbr->tar[ep].txhubport);
writeb(hub, &musbr->tar[ep].rxhubaddr);
writeb((chid + 1), &musbr->tar[ep].rxhubport);
}
/*
* do a control transfer
*/
int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int len, struct devrequest *setup)
{
int devnum = usb_pipedevice(pipe);
u16 csr;
u8 devspeed;
/* select control endpoint */
writeb(MUSB_CONTROL_EP, &musbr->index);
csr = readw(&musbr->txcsr);
/* target addr and (for multipoint) hub addr/port */
writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].txfuncaddr);
writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].rxfuncaddr);
/* configure the hub address and the port number as required */
devspeed = get_dev_speed(dev);
if ((musb_ishighspeed()) && (dev->parent != NULL) &&
(devspeed != MUSB_TYPE_SPEED_HIGH)) {
config_hub_port(dev, MUSB_CONTROL_EP);
writeb(devspeed << 6, &musbr->txtype);
} else {
writeb(musb_cfg.musb_speed << 6, &musbr->txtype);
writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubaddr);
writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubport);
writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubaddr);
writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubport);
}
/* Control transfer setup phase */
if (ctrlreq_setup_phase(dev, setup) < 0)
return 0;
switch (setup->request) {
case USB_REQ_GET_DESCRIPTOR:
case USB_REQ_GET_CONFIGURATION:
case USB_REQ_GET_INTERFACE:
case USB_REQ_GET_STATUS:
case USB_MSC_BBB_GET_MAX_LUN:
/* control transfer in-data-phase */
if (ctrlreq_in_data_phase(dev, len, buffer) < 0)
return 0;
/* control transfer out-status-phase */
if (ctrlreq_out_status_phase(dev) < 0)
return 0;
break;
case USB_REQ_SET_ADDRESS:
case USB_REQ_SET_CONFIGURATION:
case USB_REQ_SET_FEATURE:
case USB_REQ_SET_INTERFACE:
case USB_REQ_CLEAR_FEATURE:
case USB_MSC_BBB_RESET:
/* control transfer in status phase */
if (ctrlreq_in_status_phase(dev) < 0)
return 0;
break;
case USB_REQ_SET_DESCRIPTOR:
/* control transfer out data phase */
if (ctrlreq_out_data_phase(dev, len, buffer) < 0)
return 0;
/* control transfer in status phase */
if (ctrlreq_in_status_phase(dev) < 0)
return 0;
break;
default:
/* unhandled control transfer */
return -1;
}
dev->status = 0;
dev->act_len = len;
return len;
}
/*
* do a bulk transfer
*/
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int len)
{
int dir_out = usb_pipeout(pipe);
int ep = usb_pipeendpoint(pipe);
int devnum = usb_pipedevice(pipe);
u8 type;
u16 csr;
u32 txlen = 0;
u32 nextlen = 0;
u8 devspeed;
/* select bulk endpoint */
writeb(MUSB_BULK_EP, &musbr->index);
/* write the address of the device */
if (dir_out)
writeb(devnum, &musbr->tar[MUSB_BULK_EP].txfuncaddr);
else
writeb(devnum, &musbr->tar[MUSB_BULK_EP].rxfuncaddr);
/* configure the hub address and the port number as required */
devspeed = get_dev_speed(dev);
if ((musb_ishighspeed()) && (dev->parent != NULL) &&
(devspeed != MUSB_TYPE_SPEED_HIGH)) {
/*
* MUSB is in high speed and the destination device is full
* speed device. So configure the hub address and port
* address registers.
*/
config_hub_port(dev, MUSB_BULK_EP);
} else {
if (dir_out) {
writeb(0, &musbr->tar[MUSB_BULK_EP].txhubaddr);
writeb(0, &musbr->tar[MUSB_BULK_EP].txhubport);
} else {
writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubaddr);
writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubport);
}
devspeed = musb_cfg.musb_speed;
}
/* Write the saved toggle bit value */
write_toggle(dev, ep, dir_out);
if (dir_out) { /* bulk-out transfer */
/* Program the TxType register */
type = (devspeed << MUSB_TYPE_SPEED_SHIFT) |
(MUSB_TYPE_PROTO_BULK << MUSB_TYPE_PROTO_SHIFT) |
(ep & MUSB_TYPE_REMOTE_END);
writeb(type, &musbr->txtype);
/* Write maximum packet size to the TxMaxp register */
writew(dev->epmaxpacketout[ep], &musbr->txmaxp);
while (txlen < len) {
nextlen = ((len-txlen) < dev->epmaxpacketout[ep]) ?
(len-txlen) : dev->epmaxpacketout[ep];
/* Write the data to the FIFO */
write_fifo(MUSB_BULK_EP, nextlen,
(void *)(((u8 *)buffer) + txlen));
/* Set the TxPktRdy bit */
csr = readw(&musbr->txcsr);
writew(csr | MUSB_TXCSR_TXPKTRDY, &musbr->txcsr);
/* Wait until the TxPktRdy bit is cleared */
if (!wait_until_txep_ready(dev, MUSB_BULK_EP)) {
readw(&musbr->txcsr);
usb_settoggle(dev, ep, dir_out,
(csr >> MUSB_TXCSR_H_DATATOGGLE_SHIFT) & 1);
dev->act_len = txlen;
return 0;
}
txlen += nextlen;
}
/* Keep a copy of the data toggle bit */
csr = readw(&musbr->txcsr);
usb_settoggle(dev, ep, dir_out,
(csr >> MUSB_TXCSR_H_DATATOGGLE_SHIFT) & 1);
} else { /* bulk-in transfer */
/* Write the saved toggle bit value */
write_toggle(dev, ep, dir_out);
/* Program the RxType register */
type = (devspeed << MUSB_TYPE_SPEED_SHIFT) |
(MUSB_TYPE_PROTO_BULK << MUSB_TYPE_PROTO_SHIFT) |
(ep & MUSB_TYPE_REMOTE_END);
writeb(type, &musbr->rxtype);
/* Write the maximum packet size to the RxMaxp register */
writew(dev->epmaxpacketin[ep], &musbr->rxmaxp);
while (txlen < len) {
nextlen = ((len-txlen) < dev->epmaxpacketin[ep]) ?
(len-txlen) : dev->epmaxpacketin[ep];
/* Set the ReqPkt bit */
writew(MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
/* Wait until the RxPktRdy bit is set */
if (!wait_until_rxep_ready(dev, MUSB_BULK_EP)) {
csr = readw(&musbr->rxcsr);
usb_settoggle(dev, ep, dir_out,
(csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
csr &= ~MUSB_RXCSR_RXPKTRDY;
writew(csr, &musbr->rxcsr);
dev->act_len = txlen;
return 0;
}
/* Read the data from the FIFO */
read_fifo(MUSB_BULK_EP, nextlen,
(void *)(((u8 *)buffer) + txlen));
/* Clear the RxPktRdy bit */
csr = readw(&musbr->rxcsr);
csr &= ~MUSB_RXCSR_RXPKTRDY;
writew(csr, &musbr->rxcsr);
txlen += nextlen;
}
/* Keep a copy of the data toggle bit */
csr = readw(&musbr->rxcsr);
usb_settoggle(dev, ep, dir_out,
(csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
}
/* bulk transfer is complete */
dev->status = 0;
dev->act_len = len;
return 0;
}
/*
* This function initializes the usb controller module.
*/
int usb_lowlevel_init(void)
{
u8 power;
u32 timeout;
if (musb_platform_init() == -1)
return -1;
/* Configure all the endpoint FIFO's and start usb controller */
musbr = musb_cfg.regs;
musb_configure_ep(&epinfo[0],
sizeof(epinfo) / sizeof(struct musb_epinfo));
musb_start();
/*
* Wait until musb is enabled in host mode with a timeout. There
* should be a usb device connected.
*/
timeout = musb_cfg.timeout;
while (timeout--)
if (readb(&musbr->devctl) & MUSB_DEVCTL_HM)
break;
/* if musb core is not in host mode, then return */
if (!timeout)
return -1;
/* start usb bus reset */
power = readb(&musbr->power);
writeb(power | MUSB_POWER_RESET, &musbr->power);
/* After initiating a usb reset, wait for about 20ms to 30ms */
udelay(30000);
/* stop usb bus reset */
power = readb(&musbr->power);
power &= ~MUSB_POWER_RESET;
writeb(power, &musbr->power);
/* Determine if the connected device is a high/full/low speed device */
musb_cfg.musb_speed = (readb(&musbr->power) & MUSB_POWER_HSMODE) ?
MUSB_TYPE_SPEED_HIGH :
((readb(&musbr->devctl) & MUSB_DEVCTL_FSDEV) ?
MUSB_TYPE_SPEED_FULL : MUSB_TYPE_SPEED_LOW);
return 0;
}
/*
* This function stops the operation of the davinci usb module.
*/
int usb_lowlevel_stop(void)
{
/* Reset the USB module */
musb_platform_deinit();
writeb(0, &musbr->devctl);
return 0;
}
/*
* This function supports usb interrupt transfers. Currently, usb interrupt
* transfers are not supported.
*/
int submit_int_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int len, int interval)
{
int dir_out = usb_pipeout(pipe);
int ep = usb_pipeendpoint(pipe);
int devnum = usb_pipedevice(pipe);
u8 type;
u16 csr;
u32 txlen = 0;
u32 nextlen = 0;
u8 devspeed;
/* select interrupt endpoint */
writeb(MUSB_INTR_EP, &musbr->index);
/* write the address of the device */
if (dir_out)
writeb(devnum, &musbr->tar[MUSB_INTR_EP].txfuncaddr);
else
writeb(devnum, &musbr->tar[MUSB_INTR_EP].rxfuncaddr);
/* configure the hub address and the port number as required */
devspeed = get_dev_speed(dev);
if ((musb_ishighspeed()) && (dev->parent != NULL) &&
(devspeed != MUSB_TYPE_SPEED_HIGH)) {
/*
* MUSB is in high speed and the destination device is full
* speed device. So configure the hub address and port
* address registers.
*/
config_hub_port(dev, MUSB_INTR_EP);
} else {
if (dir_out) {
writeb(0, &musbr->tar[MUSB_INTR_EP].txhubaddr);
writeb(0, &musbr->tar[MUSB_INTR_EP].txhubport);
} else {
writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubaddr);
writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubport);
}
devspeed = musb_cfg.musb_speed;
}
/* Write the saved toggle bit value */
write_toggle(dev, ep, dir_out);
if (!dir_out) { /* intrrupt-in transfer */
/* Write the saved toggle bit value */
write_toggle(dev, ep, dir_out);
writeb(interval, &musbr->rxinterval);
/* Program the RxType register */
type = (devspeed << MUSB_TYPE_SPEED_SHIFT) |
(MUSB_TYPE_PROTO_INTR << MUSB_TYPE_PROTO_SHIFT) |
(ep & MUSB_TYPE_REMOTE_END);
writeb(type, &musbr->rxtype);
/* Write the maximum packet size to the RxMaxp register */
writew(dev->epmaxpacketin[ep], &musbr->rxmaxp);
while (txlen < len) {
nextlen = ((len-txlen) < dev->epmaxpacketin[ep]) ?
(len-txlen) : dev->epmaxpacketin[ep];
/* Set the ReqPkt bit */
writew(MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
/* Wait until the RxPktRdy bit is set */
if (!wait_until_rxep_ready(dev, MUSB_INTR_EP)) {
csr = readw(&musbr->rxcsr);
usb_settoggle(dev, ep, dir_out,
(csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
csr &= ~MUSB_RXCSR_RXPKTRDY;
writew(csr, &musbr->rxcsr);
dev->act_len = txlen;
return 0;
}
/* Read the data from the FIFO */
read_fifo(MUSB_INTR_EP, nextlen,
(void *)(((u8 *)buffer) + txlen));
/* Clear the RxPktRdy bit */
csr = readw(&musbr->rxcsr);
csr &= ~MUSB_RXCSR_RXPKTRDY;
writew(csr, &musbr->rxcsr);
txlen += nextlen;
}
/* Keep a copy of the data toggle bit */
csr = readw(&musbr->rxcsr);
usb_settoggle(dev, ep, dir_out,
(csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
}
/* interrupt transfer is complete */
dev->irq_status = 0;
dev->irq_act_len = len;
dev->irq_handle(dev);
dev->status = 0;
dev->act_len = len;
return 0;
}
#ifdef CONFIG_SYS_USB_EVENT_POLL
/*
* This function polls for USB keyboard data.
*/
void usb_event_poll()
{
struct stdio_dev *dev;
struct usb_device *usb_kbd_dev;
struct usb_interface_descriptor *iface;
struct usb_endpoint_descriptor *ep;
int pipe;
int maxp;
/* Get the pointer to USB Keyboard device pointer */
dev = stdio_get_by_name("usbkbd");
usb_kbd_dev = (struct usb_device *)dev->priv;
iface = &usb_kbd_dev->config.if_desc[0];
ep = &iface->ep_desc[0];
pipe = usb_rcvintpipe(usb_kbd_dev, ep->bEndpointAddress);
/* Submit a interrupt transfer request */
maxp = usb_maxpacket(usb_kbd_dev, pipe);
usb_submit_int_msg(usb_kbd_dev, pipe, &new[0],
maxp > 8 ? 8 : maxp, ep->bInterval);
}
#endif /* CONFIG_SYS_USB_EVENT_POLL */