upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/xilinx/microblaze-generic/microblaze-generic.c

131 lines
3.5 KiB

/*
* (C) Copyright 2007 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* This is a board specific file. It's OK to include board specific
* header files */
#include <common.h>
#include <config.h>
#include <netdev.h>
#include <asm/microblaze_intc.h>
#include <asm/asm.h>
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
#ifdef CONFIG_SYS_GPIO_0
*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) =
++(*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)));
#endif
#ifdef CONFIG_SYS_RESET_ADDRESS
puts ("Reseting board\n");
asm ("bra r0");
#endif
return 0;
}
int gpio_init (void)
{
#ifdef CONFIG_SYS_GPIO_0
*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = 0xFFFFFFFF;
#endif
return 0;
}
#ifdef CONFIG_SYS_FSL_2
void fsl_isr2 (void *arg) {
volatile int num;
*((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)) =
++(*((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)));
GET (num, 2);
NGET (num, 2);
puts("*");
}
int fsl_init2 (void) {
puts("fsl_init2\n");
install_interrupt_handler (FSL_INTR_2, fsl_isr2, NULL);
return 0;
}
#endif
int board_eth_init(bd_t *bis)
{
int ret = 0;
#ifdef CONFIG_XILINX_AXIEMAC
ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
XILINX_AXIDMA_BASEADDR);
#endif
#ifdef CONFIG_XILINX_EMACLITE
u32 txpp = 0;
u32 rxpp = 0;
# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
txpp = 1;
# endif
# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
rxpp = 1;
# endif
ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
txpp, rxpp);
#endif
#ifdef CONFIG_XILINX_LL_TEMAC
# ifdef XILINX_LLTEMAC_BASEADDR
# ifdef XILINX_LLTEMAC_FIFO_BASEADDR
ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR);
# elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR
# if XILINX_LLTEMAC_SDMA_USE_DCR == 1
ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
XILINX_LL_TEMAC_M_SDMA_DCR,
XILINX_LLTEMAC_SDMA_CTRL_BASEADDR);
# else
ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
XILINX_LL_TEMAC_M_SDMA_PLB,
XILINX_LLTEMAC_SDMA_CTRL_BASEADDR);
# endif
# endif
# endif
# ifdef XILINX_LLTEMAC_BASEADDR1
# ifdef XILINX_LLTEMAC_FIFO_BASEADDR1
ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR1);
# elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1
# if XILINX_LLTEMAC_SDMA_USE_DCR == 1
ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
XILINX_LL_TEMAC_M_SDMA_DCR,
XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1);
# else
ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
XILINX_LL_TEMAC_M_SDMA_PLB,
XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1);
# endif
# endif
# endif
#endif
return ret;
}