|
|
|
|
menu "Generic Driver Options"
|
|
|
|
|
|
|
|
|
|
config DM
|
|
|
|
|
bool "Enable Driver Model"
|
|
|
|
|
help
|
|
|
|
|
This config option enables Driver Model. This brings in the core
|
|
|
|
|
support, including scanning of platform data on start-up. If
|
|
|
|
|
CONFIG_OF_CONTROL is enabled, the device tree will be scanned also
|
|
|
|
|
when available.
|
|
|
|
|
|
|
|
|
|
config SPL_DM
|
|
|
|
|
bool "Enable Driver Model for SPL"
|
|
|
|
|
depends on DM && SPL
|
|
|
|
|
help
|
|
|
|
|
Enable driver model in SPL. You will need to provide a
|
|
|
|
|
suitable malloc() implementation. If you are not using the
|
|
|
|
|
full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
|
|
|
|
|
consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
|
|
|
|
|
must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
|
|
|
|
|
In most cases driver model will only allocate a few uclasses
|
|
|
|
|
and devices in SPL, so 1KB should be enable. See
|
|
|
|
|
CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it.
|
|
|
|
|
|
|
|
|
|
config DM_WARN
|
|
|
|
|
bool "Enable warnings in driver model"
|
|
|
|
|
depends on DM
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
The dm_warn() function can use up quite a bit of space for its
|
|
|
|
|
strings. By default this is disabled for SPL builds to save space.
|
|
|
|
|
This will cause dm_warn() to be compiled out - it will do nothing
|
|
|
|
|
when called.
|
|
|
|
|
|
|
|
|
|
config DM_DEVICE_REMOVE
|
|
|
|
|
bool "Support device removal"
|
|
|
|
|
depends on DM
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
We can save some code space by dropping support for removing a
|
|
|
|
|
device. This is not normally required in SPL, so by default this
|
|
|
|
|
option is disabled for SPL.
|
|
|
|
|
|
|
|
|
|
Note that this may have undesirable results in the USB subsystem as
|
|
|
|
|
it causes unplugged devices to linger around in the dm-tree, and it
|
|
|
|
|
causes USB host controllers to not be stopped when booting the OS.
|
|
|
|
|
|
|
|
|
|
config DM_STDIO
|
|
|
|
|
bool "Support stdio registration"
|
|
|
|
|
depends on DM
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
Normally serial drivers register with stdio so that they can be used
|
|
|
|
|
as normal output devices. In SPL we don't normally use stdio, so
|
|
|
|
|
we can omit this feature.
|
|
|
|
|
|
|
|
|
|
config DM_SEQ_ALIAS
|
|
|
|
|
bool "Support numbered aliases in device tree"
|
|
|
|
|
depends on DM
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
Most boards will have a '/aliases' node containing the path to
|
|
|
|
|
numbered devices (e.g. serial0 = &serial0). This feature can be
|
|
|
|
|
disabled if it is not required, to save code space in SPL.
|
|
|
|
|
|
|
|
|
|
config REGMAP
|
|
|
|
|
bool "Support register maps"
|
|
|
|
|
depends on DM
|
|
|
|
|
help
|
|
|
|
|
Hardware peripherals tend to have one or more sets of registers
|
|
|
|
|
which can be accessed to control the hardware. A register map
|
|
|
|
|
models this with a simple read/write interface. It can in principle
|
|
|
|
|
support any bus type (I2C, SPI) but so far this only supports
|
|
|
|
|
direct memory access.
|
|
|
|
|
|
|
|
|
|
config SPL_REGMAP
|
|
|
|
|
bool "Support register maps in SPL"
|
|
|
|
|
depends on DM
|
|
|
|
|
help
|
|
|
|
|
Hardware peripherals tend to have one or more sets of registers
|
|
|
|
|
which can be accessed to control the hardware. A register map
|
|
|
|
|
models this with a simple read/write interface. It can in principle
|
|
|
|
|
support any bus type (I2C, SPI) but so far this only supports
|
|
|
|
|
direct memory access.
|
|
|
|
|
|
|
|
|
|
config SYSCON
|
|
|
|
|
bool "Support system controllers"
|
|
|
|
|
depends on REGMAP
|
|
|
|
|
help
|
|
|
|
|
Many SoCs have a number of system controllers which are dealt with
|
|
|
|
|
as a group by a single driver. Some common functionality is provided
|
|
|
|
|
by this uclass, including accessing registers via regmap and
|
|
|
|
|
assigning a unique number to each.
|
devres: introduce Devres (Managed Device Resource) framework
In U-Boot's driver model, memory is basically allocated and freed
in the core framework. So, low level drivers generally only have
to specify the size of needed memory with .priv_auto_alloc_size,
.platdata_auto_alloc_size, etc. Nevertheless, some drivers still
need to allocate/free memory on their own in case they cannot
statically know the necessary memory size. So, I believe it is
reasonable enough to port Devres into U-boot.
Devres, which originates in Linux, manages device resources for each
device and automatically releases them on driver detach. With devres,
device resources are guaranteed to be freed whether initialization
fails half-way or the device gets detached.
The basic idea is totally the same to that of Linux, but I tweaked
it a bit so that it fits in U-Boot's driver model.
In U-Boot, drivers are activated in two steps: binding and probing.
Binding puts a driver and a device together. It is just data
manipulation on the system memory, so nothing has happened on the
hardware device at this moment. When the device is really used, it
is probed. Probing initializes the real hardware device to make it
really ready for use.
So, the resources acquired during the probing process must be freed
when the device is removed. Likewise, what has been allocated in
binding should be released when the device is unbound. The struct
devres has a member "probe" to remember when the resource was
allocated.
CONFIG_DEBUG_DEVRES is also supported for easier debugging.
If enabled, debug messages are printed each time a resource is
allocated/freed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years ago
|
|
|
|
|
|
|
|
config SPL_SYSCON
|
|
|
|
|
bool "Support system controllers in SPL"
|
|
|
|
|
depends on REGMAP
|
|
|
|
|
help
|
|
|
|
|
Many SoCs have a number of system controllers which are dealt with
|
|
|
|
|
as a group by a single driver. Some common functionality is provided
|
|
|
|
|
by this uclass, including accessing registers via regmap and
|
|
|
|
|
assigning a unique number to each.
|
|
|
|
|
|
|
|
|
|
config DEVRES
|
|
|
|
|
bool "Managed device resources"
|
|
|
|
|
depends on DM
|
|
|
|
|
help
|
|
|
|
|
This option enables the Managed device resources core support.
|
|
|
|
|
Device resources managed by the devres framework are automatically
|
|
|
|
|
released whether initialization fails half-way or the device gets
|
|
|
|
|
detached.
|
|
|
|
|
|
|
|
|
|
If this option is disabled, devres functions fall back to
|
|
|
|
|
non-managed variants. For example, devres_alloc() to kzalloc(),
|
|
|
|
|
devm_kmalloc() to kmalloc(), etc.
|
|
|
|
|
|
devres: introduce Devres (Managed Device Resource) framework
In U-Boot's driver model, memory is basically allocated and freed
in the core framework. So, low level drivers generally only have
to specify the size of needed memory with .priv_auto_alloc_size,
.platdata_auto_alloc_size, etc. Nevertheless, some drivers still
need to allocate/free memory on their own in case they cannot
statically know the necessary memory size. So, I believe it is
reasonable enough to port Devres into U-boot.
Devres, which originates in Linux, manages device resources for each
device and automatically releases them on driver detach. With devres,
device resources are guaranteed to be freed whether initialization
fails half-way or the device gets detached.
The basic idea is totally the same to that of Linux, but I tweaked
it a bit so that it fits in U-Boot's driver model.
In U-Boot, drivers are activated in two steps: binding and probing.
Binding puts a driver and a device together. It is just data
manipulation on the system memory, so nothing has happened on the
hardware device at this moment. When the device is really used, it
is probed. Probing initializes the real hardware device to make it
really ready for use.
So, the resources acquired during the probing process must be freed
when the device is removed. Likewise, what has been allocated in
binding should be released when the device is unbound. The struct
devres has a member "probe" to remember when the resource was
allocated.
CONFIG_DEBUG_DEVRES is also supported for easier debugging.
If enabled, debug messages are printed each time a resource is
allocated/freed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years ago
|
|
|
config DEBUG_DEVRES
|
|
|
|
|
bool "Managed device resources debugging functions"
|
|
|
|
|
depends on DEVRES
|
devres: introduce Devres (Managed Device Resource) framework
In U-Boot's driver model, memory is basically allocated and freed
in the core framework. So, low level drivers generally only have
to specify the size of needed memory with .priv_auto_alloc_size,
.platdata_auto_alloc_size, etc. Nevertheless, some drivers still
need to allocate/free memory on their own in case they cannot
statically know the necessary memory size. So, I believe it is
reasonable enough to port Devres into U-boot.
Devres, which originates in Linux, manages device resources for each
device and automatically releases them on driver detach. With devres,
device resources are guaranteed to be freed whether initialization
fails half-way or the device gets detached.
The basic idea is totally the same to that of Linux, but I tweaked
it a bit so that it fits in U-Boot's driver model.
In U-Boot, drivers are activated in two steps: binding and probing.
Binding puts a driver and a device together. It is just data
manipulation on the system memory, so nothing has happened on the
hardware device at this moment. When the device is really used, it
is probed. Probing initializes the real hardware device to make it
really ready for use.
So, the resources acquired during the probing process must be freed
when the device is removed. Likewise, what has been allocated in
binding should be released when the device is unbound. The struct
devres has a member "probe" to remember when the resource was
allocated.
CONFIG_DEBUG_DEVRES is also supported for easier debugging.
If enabled, debug messages are printed each time a resource is
allocated/freed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years ago
|
|
|
help
|
|
|
|
|
If this option is enabled, devres debug messages are printed.
|
|
|
|
|
Also, a function is available to dump a list of device resources.
|
devres: introduce Devres (Managed Device Resource) framework
In U-Boot's driver model, memory is basically allocated and freed
in the core framework. So, low level drivers generally only have
to specify the size of needed memory with .priv_auto_alloc_size,
.platdata_auto_alloc_size, etc. Nevertheless, some drivers still
need to allocate/free memory on their own in case they cannot
statically know the necessary memory size. So, I believe it is
reasonable enough to port Devres into U-boot.
Devres, which originates in Linux, manages device resources for each
device and automatically releases them on driver detach. With devres,
device resources are guaranteed to be freed whether initialization
fails half-way or the device gets detached.
The basic idea is totally the same to that of Linux, but I tweaked
it a bit so that it fits in U-Boot's driver model.
In U-Boot, drivers are activated in two steps: binding and probing.
Binding puts a driver and a device together. It is just data
manipulation on the system memory, so nothing has happened on the
hardware device at this moment. When the device is really used, it
is probed. Probing initializes the real hardware device to make it
really ready for use.
So, the resources acquired during the probing process must be freed
when the device is removed. Likewise, what has been allocated in
binding should be released when the device is unbound. The struct
devres has a member "probe" to remember when the resource was
allocated.
CONFIG_DEBUG_DEVRES is also supported for easier debugging.
If enabled, debug messages are printed each time a resource is
allocated/freed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years ago
|
|
|
Select this if you are having a problem with devres or want to
|
|
|
|
|
debug resource management for a managed device.
|
|
|
|
|
|
|
|
|
|
If you are unsure about this, Say N here.
|
|
|
|
|
|
|
|
|
|
config SIMPLE_BUS
|
|
|
|
|
bool "Support simple-bus driver"
|
|
|
|
|
depends on DM && OF_CONTROL
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
Supports the 'simple-bus' driver, which is used on some systems.
|
|
|
|
|
|
|
|
|
|
config SPL_SIMPLE_BUS
|
|
|
|
|
bool "Support simple-bus driver in SPL"
|
|
|
|
|
depends on SPL_DM && SPL_OF_CONTROL
|
|
|
|
|
default n
|
|
|
|
|
help
|
|
|
|
|
Supports the 'simple-bus' driver, which is used on some systems
|
|
|
|
|
in SPL.
|
|
|
|
|
|
|
|
|
|
config OF_TRANSLATE
|
|
|
|
|
bool "Translate addresses using fdt_translate_address"
|
|
|
|
|
depends on DM && OF_CONTROL
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
If this option is enabled, the reg property will be translated
|
|
|
|
|
using the fdt_translate_address() function. This is necessary
|
|
|
|
|
on some platforms (e.g. MVEBU) using complex "ranges"
|
|
|
|
|
properties in many nodes. As this translation is not handled
|
|
|
|
|
correctly in the default simple_bus_translate() function.
|
|
|
|
|
|
|
|
|
|
If this option is not enabled, simple_bus_translate() will be
|
|
|
|
|
used for the address translation. This function is faster and
|
|
|
|
|
smaller in size than fdt_translate_address().
|
|
|
|
|
|
|
|
|
|
config SPL_OF_TRANSLATE
|
|
|
|
|
bool "Translate addresses using fdt_translate_address"
|
|
|
|
|
depends on SPL_DM && SPL_OF_CONTROL
|
|
|
|
|
default n
|
|
|
|
|
help
|
|
|
|
|
If this option is enabled, the reg property will be translated
|
|
|
|
|
using the fdt_translate_address() function. This is necessary
|
|
|
|
|
on some platforms (e.g. MVEBU) using complex "ranges"
|
|
|
|
|
properties in many nodes. As this translation is not handled
|
|
|
|
|
correctly in the default simple_bus_translate() function.
|
|
|
|
|
|
|
|
|
|
If this option is not enabled, simple_bus_translate() will be
|
|
|
|
|
used for the address translation. This function is faster and
|
|
|
|
|
smaller in size than fdt_translate_address().
|
|
|
|
|
|
|
|
|
|
endmenu
|
