upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
41 lines
1.3 KiB
41 lines
1.3 KiB
11 years ago
|
U-Boot for SolidRun Hummingboard
|
||
|
|
--------------------------------
|
||
|
|
|
||
|
|
This file contains information for the port of U-Boot to the Hummingboard.
|
||
|
|
|
||
|
|
For more details about Hummingboard, please refer to:
|
||
|
|
http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware
|
||
|
|
|
||
|
|
(Carrier-One was the previous name of Hummingboard).
|
||
|
|
|
||
|
|
Building U-boot for Hummingboard
|
||
|
|
--------------------------------
|
||
|
|
|
||
|
|
To build U-Boot for the Hummingboard Solo version:
|
||
|
|
|
||
|
|
$ make hummingboard_solo_config
|
||
|
|
$ make
|
||
|
|
|
||
|
|
Flashing U-boot into the SD card
|
||
|
|
--------------------------------
|
||
|
|
|
||
|
|
- After the 'make' command completes, the generated 'u-boot.imx' binary must be
|
||
|
|
flashed into the SD card:
|
||
|
|
|
||
|
|
$ sudo dd if=u-boot.imx of=/dev/mmcblk0 bs=1k seek=1; sync
|
||
|
|
|
||
|
|
(Note - the SD card node may vary, so adjust this as needed).
|
||
|
|
|
||
|
|
Also, a more detailed explanation on how to format the SD card is available
|
||
|
|
at doc/README.imximage.
|
||
|
|
|
||
|
|
- Insert the micro SD card into the slot located in the bottom of the board
|
||
|
|
|
||
|
|
- Connect a 3.3V USB to serial converter cable to the host PC. The MX6 UART
|
||
|
|
signals are available in the 26 pin connector as shown at:
|
||
|
|
http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware
|
||
|
|
(Check for "26 pin header layout").
|
||
|
|
|
||
|
|
- Power up the board via USB cable (CON201) and U-boot messages will appear in
|
||
|
|
the serial console.
|