ARM: am33xx: Inhibit re-initialization of DDR during RTC-only

This inhibits the re-inititialization of DDR during an RTC-only resume. If
this is not done, an L3 NOC error is produced as the DDR gets accessed
before the re-init has time to complete. Tested on AM437x GP EVM.

Signed-off-by: Russ Dill <Russ.Dill@ti.com>
[j-keerthy@ti.com Ported to Latest Master branch]
Signed-off-by: Keerthy <j-keerthy@ti.com>

arch/arm/include/asm/arch-am33xx/cpu.h

@@ -68,6 +68,9 @@
 #define PRM_RSTCTRL_RESET		0x01
 #define PRM_RSTST_WARM_RESET_MASK	0x232
 
+/* EMIF Control register bits */
+#define EMIF_CTRL_DEVOFF	BIT(0)
+
 #ifndef __KERNEL_STRICT_NAMES
 #ifndef __ASSEMBLY__
 #include <asm/ti-common/omap_wdt.h>
@@ -386,8 +389,19 @@ struct cm_device_inst {
 };
 
 struct prm_device_inst {
-	unsigned int prm_rstctrl;
-	unsigned int prm_rstst;
+	unsigned int rstctrl;
+	unsigned int rstst;
+	unsigned int rsttime;
+	unsigned int sram_count;
+	unsigned int ldo_sram_core_set;	/* offset 0x10 */
+	unsigned int ldo_sram_core_ctr;
+	unsigned int ldo_sram_mpu_setu;
+	unsigned int ldo_sram_mpu_ctrl;
+	unsigned int io_count;		/* offset 0x20 */
+	unsigned int io_pmctrl;
+	unsigned int vc_val_bypass;
+	unsigned int resv1;
+	unsigned int emif_ctrl;		/* offset 0x30 */
 };
 
 struct cm_dpll {

arch/arm/mach-omap2/am33xx/board.c

@@ -376,6 +376,9 @@ static void watchdog_disable(void)
 static void rtc_only(void)
 {
 	struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
+	struct prm_device_inst *prm_device =
+				(struct prm_device_inst *)PRM_DEVICE_INST;
+
 	u32 scratch1;
 	void (*resume_func)(void);
 
@@ -403,9 +406,20 @@ static void rtc_only(void)
 	 */
 	rtc_only_update_board_type(scratch1 >> RTC_BOARD_TYPE_SHIFT);
 
+	/*
+	 * Enable EMIF_DEVOFF in PRCM_PRM_EMIF_CTRL to indicate to EMIF we
+	 * are resuming from self-refresh. This avoids an unnecessary re-init
+	 * of the DDR. The re-init takes time and we would need to wait for
+	 * it to complete before accessing DDR to avoid L3 NOC errors.
+	 */
+	writel(EMIF_CTRL_DEVOFF, &prm_device->emif_ctrl);
+
 	rtc_only_prcm_init();
 	sdram_init();
 
+	/* Disable EMIF_DEVOFF for normal operation and to exit self-refresh */
+	writel(0, &prm_device->emif_ctrl);
+
 	resume_func = (void *)readl(&rtc->scratch0);
 	if (resume_func)
 		resume_func();