ARM: uniphier: move CONFIG_SPL_* to defconfig or select

As I repeated in the ML, I am unhappy with config entries with bare
defaults.  Kick them out of arch/arm/mach-uniphier/Kconfig.

Currently, CONFIG_SPL_SERIAL_SUPPORT is not user-configurable
(build fails without it), but it should be fixed later anyway,
so I am moving CONFIG_SPL_SERIAL_SUPPORT to defconfigs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

arch/arm/Kconfig

@@ -868,6 +868,8 @@ config ARCH_UNIPHIER
 	select PINCTRL
 	select SPL
 	select SPL_DM
+	select SPL_LIBCOMMON_SUPPORT
+	select SPL_LIBGENERIC_SUPPORT
 	select SPL_OF_CONTROL
 	select SPL_PINCTRL
 	select SUPPORT_SPL

arch/arm/mach-uniphier/Kconfig

@@ -1,20 +1,5 @@
 if ARCH_UNIPHIER
 
-config SPL_LIBCOMMON_SUPPORT
-	default y
-
-config SPL_LIBGENERIC_SUPPORT
-	default y
-
-config SPL_MMC_SUPPORT
-	default y if !ARCH_UNIPHIER_64BIT
-
-config SPL_NAND_SUPPORT
-	default y if !ARM64
-
-config SPL_SERIAL_SUPPORT
-	default y
-
 config SYS_CONFIG_NAME
 	default "uniphier"
 

configs/uniphier_ld11_defconfig

@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_LD11=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000

configs/uniphier_ld20_defconfig

@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_LD20=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000

configs/uniphier_ld4_sld8_defconfig

@@ -1,6 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_LD4_SLD8=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000

configs/uniphier_pro4_defconfig

@@ -1,6 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref"

configs/uniphier_pxs2_ld6b_defconfig

@@ -1,6 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_PRO5_PXS2_LD6B=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000

configs/uniphier_sld3_defconfig

@@ -1,6 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_SLD3=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000