Use strmhz() to format clock frequencies

Signed-off-by: Wolfgang Denk <wd@denx.de>

board/mpl/common/common_util.c

@@ -591,7 +591,7 @@ void video_get_info_str (int line_number, char *info)
 	int i,boot;
 	unsigned long pvr;
 	char buf[64];
-	char tmp[16];
+	char buf1[32], buf2[32], buf3[32], buf4[32];
 	char cpustr[16];
 	char *s, *e, bc;
 	switch (line_number)
@@ -644,11 +644,12 @@ void video_get_info_str (int line_number, char *info)
 			}
 			buf[i++]=0;
 		}
-		sprintf (info," %s %s %s MHz (%lu/%lu/%lu MHz)",
+		sprintf (info," %s %s %s MHz (%s/%s/%s MHz)",
 			buf, cpustr,
-			strmhz (tmp, gd->cpu_clk), sys_info.freqPLB / 1000000,
-			sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
-			sys_info.freqPLB / sys_info.pllExtBusDiv / 1000000);
+			strmhz (buf1, gd->cpu_clk),
+			strmhz (buf2, sys_info.freqPLB),
+			strmhz (buf3, sys_info.freqPLB / sys_info.pllOpbDiv),
+			strmhz (buf4, sys_info.freqPLB / sys_info.pllExtBusDiv));
 		return;
 	case 3:
 		/* Memory Info */

board/sbc8560/sbc8560.c

@@ -238,6 +238,7 @@ void reset_phy (void)
 int checkboard (void)
 {
 	sys_info_t sysinfo;
+	char buf[32];
 
 	get_sys_info (&sysinfo);
 
@@ -246,16 +247,17 @@ int checkboard (void)
 #else
 	printf ("Board: Wind River SBC8540 Board\n");
 #endif
-	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
-	printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
-	printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
+	printf ("\tCPU: %s MHz\n", strmhz(buf, sysinfo.freqProcessor));
+	printf ("\tCCB: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus));
+	printf ("\tDDR: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus/2));
 	if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \
 		|| (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) {
-		printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CONFIG_SYS_LBC_LCRR & 0x0f));
+		printf ("\tLBC: %s MHz\n",
+			strmhz(buf, sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f)));
 	} else {
 		printf("\tLBC: unknown\n");
 	}
-	printf("\tCPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+	printf("\tCPM: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus));
 	printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
 	return (0);
 }

cpu/mcf5227x/cpu.c

@@ -60,15 +60,17 @@ int checkcpu(void)
 	}
 
 	if (id) {
+		char buf1[32], buf2[32], buf3[32];
+
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
-		printf("       CPU CLK %d Mhz BUS CLK %d Mhz FLB CLK %d Mhz\n",
-		       (int)(gd->cpu_clk / 1000000),
-		       (int)(gd->bus_clk / 1000000),
-		       (int)(gd->flb_clk / 1000000));
-		printf("       INP CLK %d Mhz VCO CLK %d Mhz\n",
-		       (int)(gd->inp_clk / 1000000),
-		       (int)(gd->vco_clk / 1000000));
+		printf("       CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n",
+		       strmhz(buf1, gd->cpu_clk)),
+		       strmhz(buf2, gd->bus_clk)),
+		       strmhz(buf3, gd->flb_clk)));
+		printf("       INP CLK %s MHz VCO CLK %s MHz\n",
+		       strmhz(buf1, gd->inp_clk)),
+		       strmhz(buf2, gd->vco_clk)));
 	}
 
 	return 0;

cpu/mcf523x/cpu.c

@@ -60,11 +60,13 @@ int checkcpu(void)
 	}
 
 	if (id) {
+		char buf1[32], buf2[32];
+
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
-		printf("       CPU CLK %d Mhz BUS CLK %d Mhz\n",
-		       (int)(gd->cpu_clk / 1000000),
-		       (int)(gd->bus_clk / 1000000));
+		printf("       CPU CLK %s MHz BUS CLK %s MHz\n",
+		       strmhz(buf1, gd->cpu_clk)),
+		       strmhz(buf2, gd->bus_clk)));
 	}
 
 	return 0;

cpu/mcf532x/cpu.c

@@ -80,11 +80,13 @@ int checkcpu(void)
 	}
 
 	if (id) {
+		char buf1[32], buf2[32];
+
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
-		printf("       CPU CLK %d Mhz BUS CLK %d Mhz\n",
-		       (int)(gd->cpu_clk / 1000000),
-		       (int)(gd->bus_clk / 1000000));
+		printf("       CPU CLK %s MHz BUS CLK %s MHz\n",
+		       strmhz(buf1, gd->cpu_clk)),
+		       strmhz(buf2, gd->bus_clk)));
 	}
 
 	return 0;

cpu/mcf5445x/cpu.c

@@ -76,21 +76,23 @@ int checkcpu(void)
 	}
 
 	if (id) {
+		char buf1[32], buf2[32], buf3[32];
+
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
-		printf("       CPU CLK %d Mhz BUS CLK %d Mhz FLB CLK %d Mhz\n",
-		       (int)(gd->cpu_clk / 1000000),
-		       (int)(gd->bus_clk / 1000000),
-		       (int)(gd->flb_clk / 1000000));
+		printf("       CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n",
+		       strmhz(buf1, gd->cpu_clk),
+		       strmhz(buf2, gd->bus_clk),
+		       strmhz(buf3, gd->flb_clk));
 #ifdef CONFIG_PCI
-		printf("       PCI CLK %d Mhz INP CLK %d Mhz VCO CLK %d Mhz\n",
-		       (int)(gd->pci_clk / 1000000),
-		       (int)(gd->inp_clk / 1000000),
-		       (int)(gd->vco_clk / 1000000));
+		printf("       PCI CLK %s MHz INP CLK %s MHz VCO CLK %s MHz\n",
+		       strmhz(buf1, gd->pci_clk),
+		       strmhz(buf2, gd->inp_clk),
+		       strmhz(buf3, gd->vco_clk));
 #else
-		printf("       INP CLK %d Mhz VCO CLK %d Mhz\n",
-		       (int)(gd->inp_clk / 1000000),
-		       (int)(gd->vco_clk / 1000000));
+		printf("       INP CLK %s MHz VCO CLK %s MHz\n",
+		       strmhz(buf1, gd->inp_clk),
+		       strmhz(buf2, gd->vco_clk));
 #endif
 	}
 

cpu/mcf547x_8x/cpu.c

@@ -96,10 +96,12 @@ int checkcpu(void)
 	}
 
 	if (id) {
+		char buf1[32], buf2[32];
+
 		printf("Freescale MCF%d\n", id);
-		printf("       CPU CLK %d Mhz BUS CLK %d Mhz\n",
-		       (int)(gd->cpu_clk / 1000000),
-		       (int)(gd->bus_clk / 1000000));
+		printf("       CPU CLK %s MHz BUS CLK %s MHz\n",
+		       strmhz(buf1, gd->cpu_clk),
+		       strmhz(buf2, gd->bus_clk));
 	}
 
 	return 0;

cpu/mpc512x/cpu.c

@@ -45,7 +45,7 @@ int checkcpu (void)
 	ulong clock = gd->cpu_clk;
 	u32 pvr = get_pvr ();
 	u32 spridr = immr->sysconf.spridr;
-	char buf[32];
+	char buf1[32], buf2[32];
 
 	puts ("CPU:   ");
 
@@ -65,8 +65,9 @@ int checkcpu (void)
 	default:
 		puts ("unknown ");
 	}
-	printf ("at %s MHz, CSB at %3d MHz\n", strmhz(buf, clock),
-		gd->csb_clk / 1000000);
+	printf ("at %s MHz, CSB at %s MHz\n",
+		strmhz(buf1, clock),
+		strmhz(buf2, gd->csb_clk) );
 	return 0;
 }
 

cpu/mpc512x/speed.c

@@ -125,12 +125,14 @@ ulong get_bus_freq (ulong dummy)
 
 int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
+	char buf[32];
+
 	printf("Clock configuration:\n");
-	printf("  CPU:                 %4ld MHz\n", gd->cpu_clk / 1000000);
-	printf("  Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
-	printf("  IPS Bus:             %4d MHz\n", gd->ips_clk / 1000000);
-	printf("  PCI:                 %4d MHz\n", gd->pci_clk / 1000000);
-	printf("  DDR:                 %4d MHz\n", 2 * gd->csb_clk / 1000000);
+	printf("  CPU:                 %-4s MHz\n", strmhz(buf, gd->cpu_clk));
+	printf("  Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
+	printf("  IPS Bus:             %-4s MHz\n", strmhz(buf, gd->ips_clk));
+	printf("  PCI:                 %-4s MHz\n", strmhz(buf, gd->pci_clk));
+	printf("  DDR:                 %-4s MHz\n", strmhz(buf, 2*gd->csb_clk));
 	return 0;
 }
 

cpu/mpc5xxx/speed.c

@@ -81,10 +81,13 @@ int get_clocks (void)
 
 int prt_mpc5xxx_clks (void)
 {
-	printf("       Bus %ld MHz, IPB %ld MHz, PCI %ld MHz\n",
-			gd->bus_clk / 1000000, gd->ipb_clk / 1000000,
-			gd->pci_clk / 1000000);
+	char buf1[32], buf2[32], buf3[32];
 
+	printf ("       Bus %s MHz, IPB %s MHz, PCI %s MHz\n",
+		strmhz(buf1, gd->bus_clk),
+		strmhz(buf2, gd->ipb_clk),
+		strmhz(buf3, gd->pci_clk)
+	);
 	return (0);
 }
 

cpu/mpc8220/speed.c

@@ -109,10 +109,14 @@ int get_clocks (void)
 
 int prt_mpc8220_clks (void)
 {
-	printf ("       Bus %ld MHz, CPU %ld MHz, PCI %ld MHz, VCO %ld MHz\n",
-		gd->bus_clk / 1000000, gd->cpu_clk / 1000000,
-		gd->pci_clk / 1000000, gd->vco_clk / 1000000);
-
+	char buf1[32], buf2[32], buf3[32], buf4[32];
+
+	printf ("       Bus %s MHz, CPU %s MHz, PCI %s MHz, VCO %s MHz\n",
+		strmhz(buf1, gd->bus_clk),
+		strmhz(buf2, gd->cpu_clk),
+		strmhz(buf3, gd->pci_clk),
+		strmhz(buf4, gd->vco_clk)
+	);
 	return (0);
 }
 

cpu/mpc83xx/speed.c

@@ -499,44 +499,46 @@ ulong get_bus_freq(ulong dummy)
 
 int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
+	char buf[32];
+
 	printf("Clock configuration:\n");
-	printf("  Core:                %4d MHz\n", gd->core_clk / 1000000);
-	printf("  Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
+	printf("  Core:                %-4s MHz\n", strmhz(buf, gd->core_clk));
+	printf("  Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
 #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
-	printf("  QE:                  %4d MHz\n", gd->qe_clk / 1000000);
-	printf("  BRG:                 %4d MHz\n", gd->brg_clk / 1000000);
+	printf("  QE:                  %-4s MHz\n", strmhz(buf, gd->qe_clk));
+	printf("  BRG:                 %-4s MHz\n", strmhz(buf, gd->brg_clk));
 #endif
-	printf("  Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000);
-	printf("  Local Bus:           %4d MHz\n", gd->lclk_clk / 1000000);
-	printf("  DDR:                 %4ld MHz\n", gd->mem_clk / 1000000);
+	printf("  Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
+	printf("  Local Bus:           %-4s MHz\n", strmhz(buf, gd->lclk_clk));
+	printf("  DDR:                 %-4s MHz\n", strmhz(buf, gd->mem_clk));
 #if defined(CONFIG_MPC8360)
-	printf("  DDR Secondary:       %4d MHz\n", gd->mem_sec_clk / 1000000);
+	printf("  DDR Secondary:       %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
 #endif
-	printf("  SEC:                 %4d MHz\n", gd->enc_clk / 1000000);
-	printf("  I2C1:                %4d MHz\n", gd->i2c1_clk / 1000000);
+	printf("  SEC:                 %-4s MHz\n", strmhz(buf, gd->enc_clk));
+	printf("  I2C1:                %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
 #if !defined(CONFIG_MPC832X)
-	printf("  I2C2:                %4d MHz\n", gd->i2c2_clk / 1000000);
+	printf("  I2C2:                %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
 #endif
 #if defined(CONFIG_MPC8315)
-	printf("  TDM:                 %4d MHz\n", gd->tdm_clk / 1000000);
+	printf("  TDM:                 %-4s MHz\n", strmhz(buf, gd->tdm_clk));
 #endif
 #if defined(CONFIG_MPC837X)
-	printf("  SDHC:                %4d MHz\n", gd->sdhc_clk / 1000000);
+	printf("  SDHC:                %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
 #endif
 #if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
-	printf("  TSEC1:               %4d MHz\n", gd->tsec1_clk / 1000000);
-	printf("  TSEC2:               %4d MHz\n", gd->tsec2_clk / 1000000);
-	printf("  USB DR:              %4d MHz\n", gd->usbdr_clk / 1000000);
+	printf("  TSEC1:               %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
+	printf("  TSEC2:               %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
+	printf("  USB DR:              %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
 #endif
 #if defined(CONFIG_MPC834X)
-	printf("  USB MPH:             %4d MHz\n", gd->usbmph_clk / 1000000);
+	printf("  USB MPH:             %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
 #endif
 #if defined(CONFIG_MPC837X)
-	printf("  PCIEXP1:             %4d MHz\n", gd->pciexp1_clk / 1000000);
-	printf("  PCIEXP2:             %4d MHz\n", gd->pciexp2_clk / 1000000);
+	printf("  PCIEXP1:             %-4s MHz\n", strmhz(buf, gd->pciexp1_clk));
+	printf("  PCIEXP2:             %-4s MHz\n", strmhz(buf, gd->pciexp2_clk));
 #endif
 #if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
-	printf("  SATA:                %4d MHz\n", gd->sata_clk / 1000000);
+	printf("  SATA:                %-4s MHz\n", strmhz(buf, gd->sata_clk));
 #endif
 	return 0;
 }

cpu/mpc85xx/cpu.c

@@ -83,6 +83,7 @@ int checkcpu (void)
 	uint ver;
 	uint major, minor;
 	struct cpu_type *cpu;
+	char buf1[32], buf2[32];
 #ifdef CONFIG_DDR_CLK_FREQ
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
@@ -138,21 +139,24 @@ int checkcpu (void)
 	get_sys_info(&sysinfo);
 
 	puts("Clock Configuration:\n");
-	printf("       CPU:%4lu MHz, ", DIV_ROUND_UP(sysinfo.freqProcessor,1000000));
-	printf("CCB:%4lu MHz,\n", DIV_ROUND_UP(sysinfo.freqSystemBus,1000000));
+	printf("       CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor));
+	printf("CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
 
 	switch (ddr_ratio) {
 	case 0x0:
-		printf("       DDR:%4lu MHz (%lu MT/s data rate), ",
-		DIV_ROUND_UP(sysinfo.freqDDRBus,2000000), DIV_ROUND_UP(sysinfo.freqDDRBus,1000000));
+		printf("       DDR:%-4s MHz (%s MT/s data rate), ",
+			strmhz(buf1, sysinfo.freqDDRBus/2),
+			strmhz(buf2, sysinfo.freqDDRBus));
 		break;
 	case 0x7:
-		printf("       DDR:%4lu MHz (%lu MT/s data rate) (Synchronous), ",
-		DIV_ROUND_UP(sysinfo.freqDDRBus, 2000000), DIV_ROUND_UP(sysinfo.freqDDRBus, 1000000));
+		printf("       DDR:%-4s MHz (%s MT/s data rate) (Synchronous), ",
+			strmhz(buf1, sysinfo.freqDDRBus/2),
+			strmhz(buf2, sysinfo.freqDDRBus));
 		break;
 	default:
-		printf("       DDR:%4lu MHz (%lu MT/s data rate) (Asynchronous), ",
-		DIV_ROUND_UP(sysinfo.freqDDRBus, 2000000), DIV_ROUND_UP(sysinfo.freqDDRBus,1000000));
+		printf("       DDR:%-4s MHz (%s MT/s data rate) (Asynchronous), ",
+			strmhz(buf1, sysinfo.freqDDRBus/2),
+			strmhz(buf2, sysinfo.freqDDRBus));
 		break;
 	}
 
@@ -175,14 +179,14 @@ int checkcpu (void)
 		 */
 		 clkdiv *= 2;
 #endif
-		printf("LBC:%4lu MHz\n",
-		       DIV_ROUND_UP(sysinfo.freqSystemBus, 1000000) / clkdiv);
+		printf("LBC:%-4s MHz\n",
+		       strmhz(buf1, sysinfo.freqSystemBus / clkdiv));
 	} else {
 		printf("LBC: unknown (lcrr: 0x%08x)\n", lcrr);
 	}
 
 #ifdef CONFIG_CPM2
-	printf("CPM:   %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
 #endif
 
 	puts("L1:    D-cache 32 kB enabled\n       I-cache 32 kB enabled\n");