nvme: Add nvme commands

Add nvme commands in U-Boot command line. 1. "nvme scan" - scan NVMe blk devices 2. "nvme list" - show all available NVMe blk devices 3. "nvme info" - show current or a specific NVMe blk device 4. "nvme device" - show or set current device 5. "nvme part" - print partition table 6. "nvme read" - read data from NVMe blk device 7. "nvme write" - write data to NVMe blk device Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com> Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
7 years ago · 0adc38be3d
parent f6aa61d599
commit 0adc38be3d
4 changed files with 241 additions and 0 deletions
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@ -773,6 +773,13 @@ config CMD_NAND_TORTURE

 endif # CMD_NAND

+config CMD_NVME
+	bool "nvme"
+	depends on NVME
+	default y if NVME
+	help
+	  NVM Express device support
+
 config CMD_MMC_SPI
 	bool "mmc_spi - Set up MMC SPI device"
 	help
--- a/cmd/Makefile
+++ b/cmd/Makefile
@ -105,6 +105,7 @@ obj-$(CONFIG_CMD_REISER) += reiser.o
 obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o
 obj-$(CONFIG_SANDBOX) += host.o
 obj-$(CONFIG_CMD_SATA) += sata.o
+obj-$(CONFIG_CMD_NVME) += nvme.o
 obj-$(CONFIG_CMD_SF) += sf.o
 obj-$(CONFIG_CMD_SCSI) += scsi.o disk.o
 obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o
--- a/cmd/nvme.c
+++ b/cmd/nvme.c
@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2017 NXP Semiconductors
+ * Copyright (C) 2017 Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <dm.h>
+#include <nvme.h>
+#include <part.h>
+#include <linux/math64.h>
+
+static int nvme_curr_device;
+
+static int do_nvme_scan(cmd_tbl_t *cmdtp, int flag,
+		int argc, char * const argv[])
+{
+	int ret;
+
+	ret = nvme_scan_namespace();
+	if (ret)
+		return CMD_RET_FAILURE;
+
+	return CMD_RET_SUCCESS;
+}
+
+static int do_nvme_list(cmd_tbl_t *cmdtp, int flag,
+		int argc, char * const argv[])
+{
+	blk_list_devices(IF_TYPE_NVME);
+
+	return CMD_RET_SUCCESS;
+}
+
+static int do_nvme_info(cmd_tbl_t *cmdtp, int flag,
+		int argc, char * const argv[])
+{
+	int devnum;
+	struct udevice *udev;
+	int ret;
+
+	if (argc > 1)
+		devnum = (int)simple_strtoul(argv[1], NULL, 10);
+	else
+		devnum = nvme_curr_device;
+
+	ret = blk_get_device(IF_TYPE_NVME, devnum, &udev);
+	if (ret < 0)
+		return CMD_RET_FAILURE;
+
+	nvme_print_info(udev);
+
+	return CMD_RET_SUCCESS;
+}
+
+static int do_nvme_device(cmd_tbl_t *cmdtp, int flag,
+		int argc, char * const argv[])
+{
+	if (argc > 1) {
+		int devnum = (int)simple_strtoul(argv[1], NULL, 10);
+
+		if (!blk_show_device(IF_TYPE_NVME, devnum)) {
+			nvme_curr_device = devnum;
+			printf("... is now current device\n");
+		} else {
+			return CMD_RET_FAILURE;
+		}
+	} else {
+		blk_show_device(IF_TYPE_NVME, nvme_curr_device);
+	}
+
+	return CMD_RET_SUCCESS;
+}
+
+static int do_nvme_part(cmd_tbl_t *cmdtp, int flag,
+		int argc, char * const argv[])
+{
+	if (argc > 1) {
+		int devnum = (int)simple_strtoul(argv[2], NULL, 10);
+
+		if (blk_print_part_devnum(IF_TYPE_NVME, devnum)) {
+			printf("\nNVMe device %d not available\n", devnum);
+			return CMD_RET_FAILURE;
+		}
+	} else {
+		blk_print_part_devnum(IF_TYPE_NVME, nvme_curr_device);
+	}
+
+	return CMD_RET_SUCCESS;
+}
+
+static int do_nvme_read(cmd_tbl_t *cmdtp, int flag, int argc,
+		char * const argv[])
+{
+	unsigned long time;
+	if (argc != 4)
+		return CMD_RET_USAGE;
+
+	ulong addr = simple_strtoul(argv[1], NULL, 16);
+	ulong cnt = simple_strtoul(argv[3], NULL, 16);
+	ulong n;
+	lbaint_t blk = simple_strtoul(argv[2], NULL, 16);
+
+	printf("\nNVMe read: device %d block # " LBAFU " count %ld ... ",
+	       nvme_curr_device, blk, cnt);
+
+	time = get_timer(0);
+	n = blk_read_devnum(IF_TYPE_NVME, nvme_curr_device, blk,
+			    cnt, (ulong *)addr);
+	time = get_timer(time);
+
+	printf("read: %s\n", (n == cnt) ? "OK" : "ERROR");
+	printf("%lu bytes read in %lu ms", cnt * 512, time);
+	if (time > 0) {
+		puts(" (");
+		print_size(div_u64(cnt * 512, time) * 1000, "/s");
+		puts(")");
+	}
+	puts("\n");
+
+	return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
+}
+
+static int do_nvme_write(cmd_tbl_t *cmdtp, int flag, int argc,
+		char * const argv[])
+{
+	unsigned long time;
+	if (argc != 4)
+		return CMD_RET_USAGE;
+
+	ulong addr = simple_strtoul(argv[1], NULL, 16);
+	ulong cnt = simple_strtoul(argv[3], NULL, 16);
+	ulong n;
+	lbaint_t blk = simple_strtoul(argv[2], NULL, 16);
+
+	printf("\nNVMe write: device %d block # " LBAFU " count %ld ... ",
+	       nvme_curr_device, blk, cnt);
+
+	time = get_timer(0);
+	n = blk_write_devnum(IF_TYPE_NVME, nvme_curr_device, blk,
+			    cnt, (ulong *)addr);
+	time = get_timer(time);
+
+	printf("write: %s\n", (n == cnt) ? "OK" : "ERROR");
+	printf("%lu bytes write in %lu ms", cnt * 512, time);
+	if (time > 0) {
+		puts(" (");
+		print_size(div_u64(cnt * 512, time) * 1000, "/s");
+		puts(")");
+	}
+	puts("\n");
+
+	return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
+}
+
+static cmd_tbl_t cmd_nvme[] = {
+	U_BOOT_CMD_MKENT(scan, 1, 1, do_nvme_scan, "", ""),
+	U_BOOT_CMD_MKENT(list, 1, 1, do_nvme_list, "", ""),
+	U_BOOT_CMD_MKENT(info, 2, 1, do_nvme_info, "", ""),
+	U_BOOT_CMD_MKENT(device, 2, 1, do_nvme_device, "", ""),
+	U_BOOT_CMD_MKENT(part, 2, 1, do_nvme_part, "", ""),
+	U_BOOT_CMD_MKENT(write, 4, 0, do_nvme_write, "", ""),
+	U_BOOT_CMD_MKENT(read, 4, 0, do_nvme_read, "", "")
+};
+
+static int do_nvmecops(cmd_tbl_t *cmdtp, int flag, int argc,
+		char * const argv[])
+{
+	cmd_tbl_t *cp;
+
+	cp = find_cmd_tbl(argv[1], cmd_nvme, ARRAY_SIZE(cmd_nvme));
+
+	argc--;
+	argv++;
+
+	if (cp == NULL || argc > cp->maxargs)
+		return CMD_RET_USAGE;
+
+	if (flag == CMD_FLAG_REPEAT && !cp->repeatable)
+		return CMD_RET_SUCCESS;
+
+	return cp->cmd(cmdtp, flag, argc, argv);
+}
+
+U_BOOT_CMD(
+	nvme, 8, 1, do_nvmecops,
+	"NVM Express sub-system",
+	"\nnvme scan - scan NVMe blk devices\n"
+	"nvme list - show all available NVMe blk devices\n"
+	"nvme info [dev]- show current or a specific NVMe blk device\n"
+	"nvme device [dev] - show or set current device\n"
+	"nvme part [dev] - print partition table\n"
+	"nvme read  addr blk# cnt\n"
+	"nvme write addr blk# cnt"
+);
--- a/doc/README.nvme
+++ b/doc/README.nvme
@ -40,3 +40,39 @@ It only support basic block read/write functions in the NVMe driver.
 Config options
 --------------
 CONFIG_NVME	Enable NVMe device support
+CONFIG_CMD_NVME	Enable basic NVMe commands
+
+Usage in U-Boot
+---------------
+To use an NVMe hard disk from U-Boot shell, a 'nvme scan' command needs to
+be executed for all NVMe hard disks attached to the NVMe controller to be
+identified.
+
+To list all of the NVMe hard disks, try:
+
+  => nvme list
+  Device 0: Vendor: 0x8086 Rev: 8DV10131 Prod: CVFT535600LS400BGN
+	    Type: Hard Disk
+	    Capacity: 381554.0 MB = 372.6 GB (781422768 x 512)
+
+and print out detailed information for controller and namespaces via:
+
+  => nvme info
+
+Raw block read/write to can be done via the 'nvme read/write' commands:
+
+  => nvme read a0000000 0 11000
+
+  => tftp 80000000 /tftpboot/kernel.itb
+  => nvme write 80000000 0 11000
+
+Of course, file system command can be used on the NVMe hard disk as well:
+
+  => fatls nvme 0:1
+	32376967   kernel.itb
+	22929408   100m
+
+	2 file(s), 0 dir(s)
+
+  => fatload nvme 0:1 a0000000 /kernel.itb
+  => bootm a0000000