diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c index 4cf2ba0..b9dda4c 100644 --- a/arch/x86/cpu/ivybridge/cpu.c +++ b/arch/x86/cpu/ivybridge/cpu.c @@ -120,41 +120,6 @@ int arch_cpu_init_dm(void) return 0; } -static int enable_smbus(void) -{ - pci_dev_t dev; - uint16_t value; - - /* Set the SMBus device statically. */ - dev = PCI_BDF(0x0, 0x1f, 0x3); - - /* Check to make sure we've got the right device. */ - value = x86_pci_read_config16(dev, 0x0); - if (value != 0x8086) { - printf("SMBus controller not found\n"); - return -ENOSYS; - } - - /* Set SMBus I/O base. */ - x86_pci_write_config32(dev, SMB_BASE, - SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO); - - /* Set SMBus enable. */ - x86_pci_write_config8(dev, HOSTC, HST_EN); - - /* Set SMBus I/O space enable. */ - x86_pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO); - - /* Disable interrupt generation. */ - outb(0, SMBUS_IO_BASE + SMBHSTCTL); - - /* Clear any lingering errors, so transactions can run. */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - debug("SMBus controller enabled\n"); - - return 0; -} - #define PCH_EHCI0_TEMP_BAR0 0xe8000000 #define PCH_EHCI1_TEMP_BAR0 0xe8000400 #define PCH_XHCI_TEMP_BAR0 0xe8001000 @@ -271,9 +236,11 @@ int print_cpuinfo(void) post_code(POST_EARLY_INIT); /* Enable SPD ROMs and DDR-III DRAM */ - ret = enable_smbus(); + ret = uclass_first_device(UCLASS_I2C, &dev); if (ret) return ret; + if (!dev) + return -ENODEV; /* Prepare USB controller early in S3 resume */ if (boot_mode == PEI_BOOT_RESUME) diff --git a/arch/x86/dts/chromebook_link.dts b/arch/x86/dts/chromebook_link.dts index 18305a3..54f2043 100644 --- a/arch/x86/dts/chromebook_link.dts +++ b/arch/x86/dts/chromebook_link.dts @@ -283,6 +283,12 @@ intel,sata-port-map = <1>; intel,sata-port0-gen3-tx = <0x00880a7f>; }; + + smbus: smbus@1f,3 { + compatible = "intel,ich-i2c"; + reg = <0x0000fb00 0 0 0 0>; + u-boot,dm-pre-reloc; + }; }; tpm { diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index 0aee2e5..81189f3 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -1,5 +1,6 @@ CONFIG_X86=y CONFIG_SYS_MALLOC_F_LEN=0x1800 +CONFIG_DM_I2C=y CONFIG_VENDOR_GOOGLE=y CONFIG_DEFAULT_DEVICE_TREE="chromebook_link" CONFIG_TARGET_CHROMEBOOK_LINK=y @@ -20,6 +21,7 @@ CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y CONFIG_OF_CONTROL=y CONFIG_CPU=y +CONFIG_SYS_I2C_INTEL=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_LPC=y diff --git a/drivers/i2c/intel_i2c.c b/drivers/i2c/intel_i2c.c index 1082d1a..3d777ff 100644 --- a/drivers/i2c/intel_i2c.c +++ b/drivers/i2c/intel_i2c.c @@ -9,6 +9,7 @@ #include #include #include +#include int intel_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) { @@ -27,6 +28,29 @@ int intel_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) static int intel_i2c_probe(struct udevice *dev) { + /* + * So far this is just setup code for ivybridge SMbus. When we have + * a full I2C driver this may need to be moved, generalised or made + * dependant on a particular compatible string. + * + * Set SMBus I/O base + */ + dm_pci_write_config32(dev, SMB_BASE, + SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO); + + /* Set SMBus enable. */ + dm_pci_write_config8(dev, HOSTC, HST_EN); + + /* Set SMBus I/O space enable. */ + dm_pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO); + + /* Disable interrupt generation. */ + outb(0, SMBUS_IO_BASE + SMBHSTCTL); + + /* Clear any lingering errors, so transactions can run. */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + debug("SMBus controller enabled\n"); + return 0; }