Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/master

board/mcc200/auto_update.c

@@ -330,6 +330,8 @@ int do_auto_update(void)
 	int i, res = 0, bitmap_first, cnt, old_ctrlc, got_ctrlc;
 	char *env;
 	long start, end;
+
+#if 0 /* disable key-press detection to speed up boot-up time */
 	uchar keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0};
 
 	/*
@@ -347,6 +349,7 @@ int do_auto_update(void)
 		return 0;
 	}
 
+#endif
 	au_usb_stor_curr_dev = -1;
 	/* start USB */
 	if (usb_stop() < 0) {
@@ -364,18 +367,21 @@ int do_auto_update(void)
 	au_usb_stor_curr_dev = usb_stor_scan(0);
 	if (au_usb_stor_curr_dev == -1) {
 		debug ("No device found. Not initialized?\n");
-		return -1;
+		res = -1;
+		goto xit;
 	}
 	/* check whether it has a partition table */
 	stor_dev = get_dev("usb", 0);
 	if (stor_dev == NULL) {
 		debug ("uknown device type\n");
-		return -1;
+		res = -1;
+		goto xit;
 	}
 	if (fat_register_device(stor_dev, 1) != 0) {
 		debug ("Unable to use USB %d:%d for fatls\n",
 			au_usb_stor_curr_dev, 1);
-		return -1;
+		res = -1;
+		goto xit;
 	}
 	if (file_fat_detectfs() != 0) {
 		debug ("file_fat_detectfs failed\n");
@@ -504,7 +510,7 @@ int do_auto_update(void)
 		} while (res < 0);
 #endif
 	}
-	usb_stop();
+
 	/* restore the old state */
 	disable_ctrlc(old_ctrlc);
 #ifdef CONFIG_PROGRESSBAR
@@ -517,6 +523,8 @@ int do_auto_update(void)
 		lcd_enable();
 	}
 #endif
-	return 0;
+ xit:
+	usb_stop();
+	return res;
 }
 #endif /* CONFIG_AUTO_UPDATE */

board/trab/auto_update.c

@@ -450,7 +450,7 @@ do_auto_update(void)
 {
 	block_dev_desc_t *stor_dev;
 	long sz;
-	int i, res, bitmap_first, cnt, old_ctrlc, got_ctrlc;
+	int i, res = 0, bitmap_first, cnt, old_ctrlc, got_ctrlc;
 	char *env;
 	long start, end;
 
@@ -477,18 +477,21 @@ do_auto_update(void)
 	au_usb_stor_curr_dev = usb_stor_scan(0);
 	if (au_usb_stor_curr_dev == -1) {
 		debug ("No device found. Not initialized?\n");
-		return -1;
+		res = -1;
+		goto xit;
 	}
 	/* check whether it has a partition table */
 	stor_dev = get_dev("usb", 0);
 	if (stor_dev == NULL) {
 		debug ("uknown device type\n");
-		return -1;
+		res = -1;
+		goto xit;
 	}
 	if (fat_register_device(stor_dev, 1) != 0) {
 		debug ("Unable to use USB %d:%d for fatls\n",
 			au_usb_stor_curr_dev, 1);
-		return -1;
+		res = -1;
+		goto xit;
 	}
 	if (file_fat_detectfs() != 0) {
 		debug ("file_fat_detectfs failed\n");
@@ -648,9 +651,10 @@ do_auto_update(void)
 			/* enable the power switch */
 			*CPLD_VFD_BK &= ~POWER_OFF;
 	}
-	usb_stop();
 	/* restore the old state */
 	disable_ctrlc(old_ctrlc);
-	return 0;
+xit:
+	usb_stop();
+	return res;
 }
 #endif /* CONFIG_AUTO_UPDATE */

include/configs/mcc200.h

@@ -111,11 +111,13 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_USB
 
+#undef	CONFIG_CMD_NET
+
 
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+#define CONFIG_BOOTDELAY	1	/* autoboot after 1 second */
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
@@ -131,20 +133,30 @@
 # define CFG__LINUX_CONSOLE	"ttyS0"
 #else
 # define CFG__BOARDNAME		"mcc200"
-# define CFG__LINUX_CONSOLE	"ttyEU7"
+# define CFG__LINUX_CONSOLE	"ttyEU5"
 #endif
 
+/* Network */
+#define CONFIG_ETHADDR	00:17:17:ff:00:00
+#define CONFIG_IPADDR	10.76.9.29
+#define CONFIG_SERVERIP	10.76.9.1
+
+#include <version.h> /* For U-Boot version */
+
 #define CONFIG_EXTRA_ENV_SETTINGS					\
+	"ubootver=" U_BOOT_VERSION "\0"					\
 	"netdev=eth0\0"							\
 	"hostname=" CFG__BOARDNAME "\0"					\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"ramargs=setenv bootargs root=/dev/mtdblock2 "			\
+		"rootfstype=cramfs\0"					\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addcons=setenv bootargs ${bootargs} "				\
-		"console=${console},${baudrate}\0"			\
+		"console=${console},${baudrate} "		\
+		"ubootver=${ubootver} board=${board}\0"	\
 	"flash_nfs=run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr}\0"				\
 	"flash_self=run ramargs addip addcons;"				\
@@ -156,6 +168,7 @@
 	"bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0"		\
 	"load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0"	\
 	"text_base=" MK_STR(TEXT_BASE) "\0"				\
+	"kernel_addr=0xFC0C0000\0"					\
 	"update=protect off ${text_base} +${filesize};"			\
 		"era ${text_base} +${filesize};"			\
 		"cp.b 200000 ${text_base} ${filesize}\0"		\
@@ -256,7 +269,7 @@
 /*
  * Ethernet configuration
  */
-#define CONFIG_MPC5xxx_FEC	1
+/*#define CONFIG_MPC5xxx_FEC	1*/
 /*
  * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
  */
@@ -337,6 +350,13 @@
 #define CFG_CS1_SIZE		0x00001000
 #define CFG_CS1_CFG		0x1d300
 
+/* Leica - build revision resistors */
+/*
+#define CFG_CS3_START		0x80020000
+#define CFG_CS3_SIZE		0x00000004
+#define CFG_CS3_CFG		0x1d300
+*/
+
 /*
  *  Select one of quarts as a default
  * console. If undefined - PSC console
@@ -392,4 +412,8 @@
 #define CONFIG_USB_CLOCK	0x0001BBBB
 #define CONFIG_USB_CONFIG	0x00005000
 
+#define CONFIG_AUTOBOOT_KEYED		/* use key strings to stop autoboot	*/
+#define CONFIG_AUTOBOOT_STOP_STR	"432"
+#define CONFIG_SILENT_CONSOLE	1
+
 #endif /* __CONFIG_H */