Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

armv8: ls2085a: Remove phy configuration from QDS and RDB

Browse Source 
As phy_connect and phy_config are being called from DPAA2 driver.
Remove calling of mentioned function from board file.

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
master
Prabhakar Kushwaha 8 years ago committed by York Sun
parent 6c2b520a37
commit 0f4b82a555
2 changed files with 0 additions and 64 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 25
      board/freescale/ls2080aqds/eth.c
  2. 39
      board/freescale/ls2080ardb/eth_ls2080rdb.c

25
board/freescale/ls2080aqds/eth.c
Unescape View File

@ -548,12 +548,6 @@ void ls2080a_handle_phy_interface_sgmii(int dpmac_id)
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
bus = mii_dev_for_muxval(EMI1_SLOT1);
wriop_set_mdio(dpmac_id, bus);
dpmac_info[dpmac_id].phydev = phy_connect(
dpmac_info[dpmac_id].bus,
dpmac_info[dpmac_id].phy_addr,
NULL,
dpmac_info[dpmac_id].enet_if);
phy_config(dpmac_info[dpmac_id].phydev);
break;
case 2:
/* Slot housing a SGMII riser card? */
@ -562,12 +556,6 @@ void ls2080a_handle_phy_interface_sgmii(int dpmac_id)
dpmac_info[dpmac_id].board_mux = EMI1_SLOT2;
bus = mii_dev_for_muxval(EMI1_SLOT2);
wriop_set_mdio(dpmac_id, bus);
dpmac_info[dpmac_id].phydev = phy_connect(
dpmac_info[dpmac_id].bus,
dpmac_info[dpmac_id].phy_addr,
NULL,
dpmac_info[dpmac_id].enet_if);
phy_config(dpmac_info[dpmac_id].phydev);
break;
case 3:
break;
@ -606,12 +594,6 @@ serdes2:
dpmac_info[dpmac_id].board_mux = EMI1_SLOT4;
bus = mii_dev_for_muxval(EMI1_SLOT4);
wriop_set_mdio(dpmac_id, bus);
dpmac_info[dpmac_id].phydev = phy_connect(
dpmac_info[dpmac_id].bus,
dpmac_info[dpmac_id].phy_addr,
NULL,
dpmac_info[dpmac_id].enet_if);
phy_config(dpmac_info[dpmac_id].phydev);
break;
case 5:
break;
@ -679,13 +661,6 @@ void ls2080a_handle_phy_interface_qsgmii(int dpmac_id)
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
bus = mii_dev_for_muxval(EMI1_SLOT1);
wriop_set_mdio(dpmac_id, bus);
dpmac_info[dpmac_id].phydev = phy_connect(
dpmac_info[dpmac_id].bus,
dpmac_info[dpmac_id].phy_addr,
NULL,
dpmac_info[dpmac_id].enet_if);
phy_config(dpmac_info[dpmac_id].phydev);
break;
case 3:
break;

39
board/freescale/ls2080ardb/eth_ls2080rdb.c
Unescape View File

@ -20,42 +20,6 @@
DECLARE_GLOBAL_DATA_PTR;
int load_firmware_cortina(struct phy_device *phy_dev)
{
if (phy_dev->drv->config)
return phy_dev->drv->config(phy_dev);
return 0;
}
void load_phy_firmware(void)
{
int i;
u8 phy_addr;
struct phy_device *phy_dev;
struct mii_dev *dev;
phy_interface_t interface;
/*Initialize and upload firmware for all the PHYs*/
for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC8; i++) {
interface = wriop_get_enet_if(i);
if (interface == PHY_INTERFACE_MODE_XGMII) {
dev = wriop_get_mdio(i);
phy_addr = wriop_get_phy_address(i);
phy_dev = phy_find_by_mask(dev, 1 << phy_addr,
interface);
if (!phy_dev) {
printf("No phydev for phyaddr %d\n", phy_addr);
continue;
}
/*Flash firmware for All CS4340 PHYS */
if (phy_dev->phy_id == PHY_UID_CS4340)
load_firmware_cortina(phy_dev);
}
}
}
int board_eth_init(bd_t *bis)
{
#if defined(CONFIG_FSL_MC_ENET)
@ -125,9 +89,6 @@ int board_eth_init(bd_t *bis)
}
}
/* Load CORTINA CS4340 PHY firmware */
load_phy_firmware();
cpu_eth_init(bis);
#endif /* CONFIG_FMAN_ENET */

Write Preview
Loading…
Cancel
Save