Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF

Browse Source 
This define does not control anything, remove it.

Signed-off-by: Tom Rini <trini@ti.com>
master
Tom Rini 13 years ago committed by Albert ARIBAUD
parent 8a87a3d72e
commit 1005ccfda4
22 changed files with 0 additions and 30 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 1
      include/configs/P1023RDS.h
  2. 1
      include/configs/P2020COME.h
  3. 1
      include/configs/am3517_crane.h
  4. 2
      include/configs/am3517_evm.h
  5. 2
      include/configs/at91sam9263ek.h
  6. 1
      include/configs/da830evm.h
  7. 1
      include/configs/ea20.h
  8. 2
      include/configs/eb_cpux9k2.h
  9. 2
      include/configs/flea3.h
  10. 1
      include/configs/hawkboard.h
  11. 1
      include/configs/imx27lite-common.h
  12. 2
      include/configs/mcx.h
  13. 1
      include/configs/meesc.h
  14. 1
      include/configs/mv-common.h
  15. 1
      include/configs/mx25pdk.h
  16. 2
      include/configs/mx35pdk.h
  17. 1
      include/configs/otc570.h
  18. 1
      include/configs/p1_p2_rdb_pc.h
  19. 1
      include/configs/spear-common.h
  20. 1
      include/configs/tam3517-common.h
  21. 2
      include/configs/tx25.h
  22. 2
      include/configs/zmx25.h

1
include/configs/P1023RDS.h
Unescape View File

@ -310,7 +310,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS
#define CONFIG_SYS_64BIT_VSPRINTF
#define CONFIG_SYS_64BIT_STRTOUL
/* new uImage format support */

1
include/configs/P2020COME.h
Unescape View File

@ -416,7 +416,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#endif
/* Misc Extra Settings */
#define CONFIG_SYS_64BIT_VSPRINTF 1
#define CONFIG_SYS_64BIT_STRTOUL 1
#define CONFIG_CMD_DHCP 1

1
include/configs/am3517_crane.h
Unescape View File

@ -174,7 +174,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
/* NAND devices */
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */

2
include/configs/am3517_evm.h
Unescape View File

@ -173,8 +173,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
/* NAND devices */
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV "nand0"

2
include/configs/at91sam9263ek.h
Unescape View File

@ -283,8 +283,6 @@
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */

1
include/configs/da830evm.h
Unescape View File

@ -111,7 +111,6 @@
#define CONFIG_SYS_NAND_CS 3
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
#define CONFIG_SYS_NAND_PAGE_2K
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_SYS_CLE_MASK 0x10
#define CONFIG_SYS_ALE_MASK 0x8
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */

1
include/configs/ea20.h
Unescape View File

@ -203,7 +203,6 @@
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* SPI Flash */

2
include/configs/eb_cpux9k2.h
Unescape View File

@ -288,8 +288,6 @@
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
#define CONFIG_SYS_64BIT_VSPRINTF 1
/* Status LED's */
#define CONFIG_STATUS_LED 1

2
include/configs/flea3.h
Unescape View File

@ -48,8 +48,6 @@
/* Set TEXT at the beginning of the NOR flash */
#define CONFIG_SYS_TEXT_BASE 0xA0000000
#define CONFIG_SYS_64BIT_VSPRINTF
/* This is required to setup the ESDC controller */
#define CONFIG_BOARD_EARLY_INIT_F

1
include/configs/hawkboard.h
Unescape View File

@ -127,7 +127,6 @@
#define CFG_DAVINCI_STD_NAND_LAYOUT
#define CONFIG_SYS_NAND_CS 3
#define CONFIG_SYS_NAND_PAGE_2K
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/* Max number of NAND devices */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE_LIST { 0x62000000, }

1
include/configs/imx27lite-common.h
Unescape View File

@ -153,7 +153,6 @@
#define CONFIG_SYS_NAND_BASE 0xd8000000
#define CONFIG_JFFS2_NAND
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*
* SD/MMC

2
include/configs/mcx.h
Unescape View File

@ -171,8 +171,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
/* NAND devices */
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV "nand0"

1
include/configs/meesc.h
Unescape View File

@ -164,7 +164,6 @@
# define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
# define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */

1
include/configs/mv-common.h
Unescape View File

@ -132,7 +132,6 @@
*/
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/*

1
include/configs/mx25pdk.h
Unescape View File

@ -65,7 +65,6 @@
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_64BIT_VSPRINTF
/* U-Boot general configuration */
#define CONFIG_SYS_PROMPT "MX25PDK U-Boot > "

2
include/configs/mx35pdk.h
Unescape View File

@ -39,8 +39,6 @@
#define CONFIG_SYS_TEXT_BASE 0xA0000000
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_SYS_64BIT_VSPRINTF
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT

1
include/configs/otc570.h
Unescape View File

@ -215,7 +215,6 @@
# define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
# define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */

1
include/configs/p1_p2_rdb_pc.h
Unescape View File

@ -534,7 +534,6 @@
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS
#define CONFIG_SYS_64BIT_VSPRINTF
#define CONFIG_SYS_64BIT_STRTOUL
/* new uImage format support */

1
include/configs/spear-common.h
Unescape View File

@ -196,7 +196,6 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR 0x00800000
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
#define CONFIG_SYS_64BIT_VSPRINTF 1
#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY

1
include/configs/tam3517-common.h
Unescape View File

@ -146,7 +146,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
/* NAND devices */
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_AUTO_COMPLETE

2
include/configs/tx25.h
Unescape View File

@ -117,8 +117,6 @@
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_LARGEPAGE
#define CONFIG_SYS_64BIT_VSPRINTF
/* U-Boot general configuration */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */

2
include/configs/zmx25.h
Unescape View File

@ -93,8 +93,6 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_CACHE
#define CONFIG_SYS_64BIT_VSPRINTF
/*
* Additional command
*/

Write Preview
Loading…
Cancel
Save