From 164abd1775a97ae271d5499f69abf1e06754952c Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Wed, 11 Jul 2018 18:54:48 +0300 Subject: [PATCH] HSDK: Fixes and improvements in README 1. Explained prerequisites for "make bsp-generate" command. 2. Cleaned-up duplicates Signed-off-by: Alexey Brodkin --- board/synopsys/hsdk/README | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/board/synopsys/hsdk/README b/board/synopsys/hsdk/README index e3793e4..e29a6a1 100644 --- a/board/synopsys/hsdk/README +++ b/board/synopsys/hsdk/README @@ -82,6 +82,12 @@ Useful notes on bulding and using of U-Boot on ARC HS Development Kit (AKA HSDK) be put on the first FAT partition of micro SD-card to be inserted in the HSDK board. + Note that Python3 script is used for generation of a header, thus + to get that done it's required to have Python3 with elftools installed. + On CentOS/RHEL/Fedora this could be installed with: + ------------------------->8---------------------- + sudo dnf install python3-pyelftools + ------------------------->8---------------------- EXECUTING U-BOOT @@ -104,8 +110,8 @@ Useful notes on bulding and using of U-Boot on ARC HS Development Kit (AKA HSDK) 1. Create `u-boot.head` and `u-boot-update.scr` as discribed above with `make bsp-generate` command. - 2. Copy `u-boot.head` and `u-boot-update.scr` to the first the first FAT - partition of micro SD-card. + 2. Copy `u-boot.head` and `u-boot-update.scr` to the first FAT partition + of micro SD-card. 3. Connect USB cable from the HSDK board to the developemnt host and fire-up serial terminal.