fsl/pci: Set CFG_READY for PCIe v3.0 and later

Freescale PCIe controllers v3.0 and later need to set bit
CFG_READY to allow all inbound configuration transactions
to be processed normally when in EP mode. However, bit
CFG_READY has been moved from PCIe configuration space to
CCSR PCIe configuration register comparing previous version.
The patch is to set this bit according to PCIe version.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

arch/powerpc/include/asm/fsl_pci.h

@@ -19,6 +19,7 @@
 #define FSL_PCI_PBFR		0x44
 
 #define FSL_PCIE_CFG_RDY	0x4b0
+#define FSL_PCIE_V3_CFG_RDY	0x1
 #define FSL_PROG_IF_AGENT	0x1
 
 #define PCI_LTSSM	0x404   /* PCIe Link Training, Status State Machine */

drivers/pci/fsl_pci_init.c

@@ -697,8 +697,14 @@ void fsl_pci_config_unlock(struct pci_controller *hose)
 	pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
 	pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
 	if (pcie_cap != 0x0) {
+		ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)hose->cfg_addr;
+		u32 block_rev = in_be32(&pci->block_rev1);
 		/* PCIe - set CFG_READY bit of Configuration Ready Register */
-		pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1);
+		if (block_rev >= PEX_IP_BLK_REV_3_0)
+			setbits_be32(&pci->config, FSL_PCIE_V3_CFG_RDY);
+		else
+			pci_hose_write_config_byte(hose, dev,
+						   FSL_PCIE_CFG_RDY, 0x1);
 	} else {
 		/* PCI - clear ACL bit of PBFR */
 		pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr);