dm: cros_ec: Convert cros_ec keyboard driver to driver model

Adjust the cros_ec keyboard driver to support driver model. Make this the
default for all Exynos boards so that those that use a keyboard will build
correctly with this driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
master
Simon Glass 9 years ago
parent f77f5e9be7
commit 1fa4bfde18
  1. 5
      README
  2. 1
      arch/arm/Kconfig
  3. 3
      arch/sandbox/Kconfig
  4. 148
      drivers/input/cros_ec_keyb.c

@ -1785,11 +1785,6 @@ CBFS (Coreboot Filesystem) support
Export function i8042_kbd_init, i8042_tstc and i8042_getc
for cfb_console. Supports cursor blinking.
CONFIG_CROS_EC_KEYB
Enables a Chrome OS keyboard using the CROS_EC interface.
This uses CROS_EC to communicate with a second microcontroller
which provides key scans on request.
- Video support:
CONFIG_VIDEO

@ -419,6 +419,7 @@ config ARCH_EXYNOS
select DM_SERIAL
select DM_SPI
select DM_GPIO
select DM_KEYBOARD
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"

@ -17,4 +17,7 @@ config PCI
used on some devices to allow the CPU to communicate with its
peripherals.
config DM_KEYBOARD
default y
endmenu

@ -8,9 +8,11 @@
#include <common.h>
#include <cros_ec.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <input.h>
#include <keyboard.h>
#include <key_matrix.h>
#include <stdio_dev.h>
@ -22,31 +24,29 @@ enum {
KBC_REPEAT_DELAY_MS = 240,
};
static struct keyb {
struct cros_ec_dev *dev; /* The CROS_EC device */
struct input_config input; /* The input layer */
struct cros_ec_keyb_priv {
struct input_config *input; /* The input layer */
struct key_matrix matrix; /* The key matrix layer */
int key_rows; /* Number of keyboard rows */
int key_cols; /* Number of keyboard columns */
int ghost_filter; /* 1 to enable ghost filter, else 0 */
int inited; /* 1 if keyboard is ready */
} config;
};
/**
* Check the keyboard controller and return a list of key matrix positions
* for which a key is pressed
*
* @param config Keyboard config
* @param dev Keyboard device
* @param keys List of keys that we have detected
* @param max_count Maximum number of keys to return
* @param samep Set to true if this scan repeats the last, else false
* @return number of pressed keys, 0 for none, -EIO on error
*/
static int check_for_keys(struct keyb *config,
struct key_matrix_key *keys, int max_count,
bool *samep)
static int check_for_keys(struct udevice *dev, struct key_matrix_key *keys,
int max_count, bool *samep)
{
struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
struct key_matrix_key *key;
static struct mbkp_keyscan last_scan;
static bool last_scan_valid;
@ -54,7 +54,7 @@ static int check_for_keys(struct keyb *config,
unsigned int row, col, bit, data;
int num_keys;
if (cros_ec_scan_keyboard(config->dev->dev, &scan)) {
if (cros_ec_scan_keyboard(dev->parent, &scan)) {
debug("%s: keyboard scan failed\n", __func__);
return -EIO;
}
@ -69,9 +69,9 @@ static int check_for_keys(struct keyb *config,
last_scan_valid = true;
memcpy(&last_scan, &scan, sizeof(last_scan));
for (col = num_keys = bit = 0; col < config->matrix.num_cols;
for (col = num_keys = bit = 0; col < priv->matrix.num_cols;
col++) {
for (row = 0; row < config->matrix.num_rows; row++) {
for (row = 0; row < priv->matrix.num_rows; row++) {
unsigned int mask = 1 << (bit & 7);
data = scan.data[bit / 8];
@ -89,28 +89,6 @@ static int check_for_keys(struct keyb *config,
}
/**
* Test if keys are available to be read
*
* @return 0 if no keys available, 1 if keys are available
*/
static int kbd_tstc(struct stdio_dev *dev)
{
/* Just get input to do this for us */
return config.inited ? input_tstc(&config.input) : 0;
}
/**
* Read a key
*
* @return ASCII key code, or 0 if no key, or -1 if error
*/
static int kbd_getc(struct stdio_dev *dev)
{
/* Just get input to do this for us */
return config.inited ? input_getc(&config.input) : 0;
}
/**
* Check the keyboard, and send any keys that are pressed.
*
* This is called by input_tstc() and input_getc() when they need more
@ -121,6 +99,8 @@ static int kbd_getc(struct stdio_dev *dev)
*/
int cros_ec_kbc_check(struct input_config *input)
{
struct udevice *dev = input->dev;
struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
static struct key_matrix_key last_keys[KBC_MAX_KEYS];
static int last_num_keys;
struct key_matrix_key keys[KBC_MAX_KEYS];
@ -139,9 +119,9 @@ int cros_ec_kbc_check(struct input_config *input)
* may return 0 before all keys have been read from the EC.
*/
do {
irq_pending = cros_ec_interrupt_pending(config.dev->dev);
irq_pending = cros_ec_interrupt_pending(dev->parent);
if (irq_pending) {
num_keys = check_for_keys(&config, keys, KBC_MAX_KEYS,
num_keys = check_for_keys(dev, keys, KBC_MAX_KEYS,
&same);
if (num_keys < 0)
return 0;
@ -158,7 +138,7 @@ int cros_ec_kbc_check(struct input_config *input)
if (num_keys < 0)
return -1;
num_keycodes = key_matrix_decode(&config.matrix, keys,
num_keycodes = key_matrix_decode(&priv->matrix, keys,
num_keys, keycodes, KBC_MAX_KEYS);
sent = input_send_keycodes(input, keycodes, num_keycodes);
@ -182,7 +162,7 @@ int cros_ec_kbc_check(struct input_config *input)
* @return 0 if ok, -1 on error
*/
static int cros_ec_keyb_decode_fdt(const void *blob, int node,
struct keyb *config)
struct cros_ec_keyb_priv *config)
{
/*
* Get keyboard rows and columns - at present we are limited to
@ -202,68 +182,56 @@ static int cros_ec_keyb_decode_fdt(const void *blob, int node,
return 0;
}
/**
* Set up the keyboard. This is called by the stdio device handler.
*
* We want to do this init when the keyboard is actually used rather than
* at start-up, since keyboard input may not currently be selected.
*
* @return 0 if ok, -1 on error
*/
static int cros_ec_init_keyboard(struct stdio_dev *dev)
static int cros_ec_kbd_probe(struct udevice *dev)
{
struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev);
struct stdio_dev *sdev = &uc_priv->sdev;
struct input_config *input = &uc_priv->input;
const void *blob = gd->fdt_blob;
int node;
int node = dev->of_offset;
int ret;
config.dev = board_get_cros_ec_dev();
if (!config.dev) {
debug("%s: no cros_ec device: cannot init keyboard\n",
__func__);
if (cros_ec_keyb_decode_fdt(blob, node, priv))
return -1;
}
node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC_KEYB);
if (node < 0) {
debug("%s: Node not found\n", __func__);
return -1;
}
if (cros_ec_keyb_decode_fdt(blob, node, &config))
return -1;
input_set_delays(&config.input, KBC_REPEAT_DELAY_MS,
KBC_REPEAT_RATE_MS);
if (key_matrix_init(&config.matrix, config.key_rows,
config.key_cols, config.ghost_filter)) {
input_set_delays(input, KBC_REPEAT_DELAY_MS, KBC_REPEAT_RATE_MS);
ret = key_matrix_init(&priv->matrix, priv->key_rows, priv->key_cols,
priv->ghost_filter);
if (ret) {
debug("%s: cannot init key matrix\n", __func__);
return -1;
return ret;
}
if (key_matrix_decode_fdt(&config.matrix, gd->fdt_blob, node)) {
ret = key_matrix_decode_fdt(&priv->matrix, gd->fdt_blob, node);
if (ret) {
debug("%s: Could not decode key matrix from fdt\n", __func__);
return -1;
return ret;
}
config.inited = 1;
debug("%s: Matrix keyboard %dx%d ready\n", __func__, config.key_rows,
config.key_cols);
debug("%s: Matrix keyboard %dx%d ready\n", __func__, priv->key_rows,
priv->key_cols);
return 0;
}
priv->input = input;
input->dev = dev;
input_add_tables(input);
input->read_keys = cros_ec_kbc_check;
strcpy(sdev->name, "cros-ec-keyb");
int drv_keyboard_init(void)
{
struct stdio_dev dev;
/* Register the device. cros_ec_init_keyboard() will be called soon */
return input_stdio_register(sdev);
}
if (input_init(&config.input, 0)) {
debug("%s: Cannot set up input\n", __func__);
return -1;
}
config.input.read_keys = cros_ec_kbc_check;
input_add_tables(&config.input);
static const struct keyboard_ops cros_ec_kbd_ops = {
};
memset(&dev, '\0', sizeof(dev));
strcpy(dev.name, "cros-ec-keyb");
dev.flags = DEV_FLAGS_INPUT;
dev.getc = kbd_getc;
dev.tstc = kbd_tstc;
dev.start = cros_ec_init_keyboard;
static const struct udevice_id cros_ec_kbd_ids[] = {
{ .compatible = "google,cros-ec-keyb" },
{ }
};
/* Register the device. cros_ec_init_keyboard() will be called soon */
return input_stdio_register(&dev);
}
U_BOOT_DRIVER(cros_ec_kbd) = {
.name = "cros_ec_kbd",
.id = UCLASS_KEYBOARD,
.of_match = cros_ec_kbd_ids,
.probe = cros_ec_kbd_probe,
.ops = &cros_ec_kbd_ops,
.priv_auto_alloc_size = sizeof(struct cros_ec_keyb_priv),
};

Loading…
Cancel
Save