From 218ca724c08ca8a649f0917cf201cf23d4b33f39 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 26 Mar 2008 10:40:12 +0100 Subject: [PATCH] README: update documentation (availability, links, etc.) Signed-off-by: Wolfgang Denk --- README | 157 +++++++++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 94 insertions(+), 63 deletions(-) diff --git a/README b/README index 0e37b8b..9e688ca 100644 --- a/README +++ b/README @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 - 2005 +# (C) Copyright 2000 - 2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -51,7 +51,8 @@ Makefile have been tested to some extent and can be considered "working". In fact, many of them are used in production systems. In case of problems see the CHANGELOG and CREDITS files to find out -who contributed the specific port. +who contributed the specific port. The MAINTAINERS file lists board +maintainers. Where to get help: @@ -65,6 +66,22 @@ before asking FAQ's. Please see http://lists.sourceforge.net/lists/listinfo/u-boot-users/ +Where to get source code: +========================= + +The U-Boot source code is maintained in the git repository at +git://www.denx.de/git/u-boot.git ; you can browse it online at +http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary + +The "snapshot" links on this page allow you to download tarballs of +any version you might be interested in. Ofifcial releases are also +available for FTP download from the ftp://ftp.denx.de/pub/u-boot/ +directory. + +Pre-build (and tested) images are available from +ftp://ftp.denx.de/pub/u-boot/images/ + + Where we come from: =================== @@ -81,6 +98,7 @@ Where we come from: - create ARMBoot project (http://sourceforge.net/projects/armboot) - add other CPU families (starting with ARM) - create U-Boot project (http://sourceforge.net/projects/u-boot) +- current project page: see http://www.denx.de/wiki/UBoot Names and Spelling: @@ -168,7 +186,7 @@ Directory Hierarchy: - lib_mips Files generic to MIPS architecture - lib_nios Files generic to NIOS architecture - lib_ppc Files generic to PowerPC architecture -- libfdt Library files to support flattened device trees +- libfdt Library files to support flattened device trees - net Networking code - post Power On Self Test - rtc Real Time Clock drivers @@ -320,7 +338,7 @@ The following options need to be configured: converts clock data to MHZ before passing it to the Linux kernel. When CONFIG_CLOCKS_IN_MHZ is defined, a definition of - "clocks_in_mhz=1" is automatically included in the + "clocks_in_mhz=1" is automatically included in the default environment. CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] @@ -686,9 +704,9 @@ The following options need to be configured: CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION and/or CONFIG_ISO_PARTITION - If IDE or SCSI support is enabled (CONFIG_CMD_IDE or - CONFIG_CMD_SCSI) you must configure support for at least - one partition type as well. + If IDE or SCSI support is enabled (CONFIG_CMD_IDE or + CONFIG_CMD_SCSI) you must configure support for at + least one partition type as well. - IDE Reset method: CONFIG_IDE_RESET_ROUTINE - this is defined in several @@ -1325,7 +1343,7 @@ The following options need to be configured: This option specifies a list of I2C devices that will be skipped when the 'i2c probe' command is issued (or 'iprobe' using the legacy command). If CONFIG_I2C_MULTI_BUS is set, specify a list of bus-device - pairs. Otherwise, specify a 1D array of device addresses + pairs. Otherwise, specify a 1D array of device addresses e.g. #undef CONFIG_I2C_MULTI_BUS @@ -2324,22 +2342,24 @@ Low Level (hardware related) configuration options: Overrides the default PCI memory map in cpu/mpc8260/pci.c if set. - CONFIG_SPD_EEPROM - Get DDR timing information from an I2C EEPROM. Common with pluggable - memory modules such as SODIMMs + Get DDR timing information from an I2C EEPROM. Common + with pluggable memory modules such as SODIMMs + SPD_EEPROM_ADDRESS I2C address of the SPD EEPROM - CFG_SPD_BUS_NUM - If SPD EEPROM is on an I2C bus other than the first one, specify here. - Note that the value must resolve to something your driver can deal with. + If SPD EEPROM is on an I2C bus other than the first + one, specify here. Note that the value must resolve + to something your driver can deal with. - CFG_83XX_DDR_USES_CS0 - Only for 83xx systems. If specified, then DDR should be configured - using CS0 and CS1 instead of CS2 and CS3. + Only for 83xx systems. If specified, then DDR should + be configured using CS0 and CS1 instead of CS2 and CS3. - CFG_83XX_DDR_USES_CS0 - Only for 83xx systems. If specified, then DDR should be configured - using CS0 and CS1 instead of CS2 and CS3. + Only for 83xx systems. If specified, then DDR should + be configured using CS0 and CS1 instead of CS2 and CS3. - CONFIG_ETHER_ON_FEC[12] Define to enable FEC[12] on a 8xx series processor. @@ -2405,29 +2425,30 @@ Low Level (hardware related) configuration options: Building the Software: ====================== -Building U-Boot has been tested in native PPC environments (on a -PowerBook G3 running LinuxPPC 2000) and in cross environments -(running RedHat 6.x and 7.x Linux on x86, Solaris 2.6 on a SPARC, and -NetBSD 1.5 on x86). - -If you are not using a native PPC environment, it is assumed that you -have the GNU cross compiling tools available in your path and named -with a prefix of "powerpc-linux-". If this is not the case, (e.g. if -you are using Monta Vista's Hard Hat Linux CDK 1.2) you must change -the definition of CROSS_COMPILE in Makefile. For HHL on a 4xx CPU, -change it to: +Building U-Boot has been tested in several native build environments +and in many different cross environments. Of course we cannot support +all possibly existing versions of cross development tools in all +(potentially obsolete) versions. In case of tool chain problems we +recommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK) +which is extensively used to build and test U-Boot. - CROSS_COMPILE = ppc_4xx- +If you are not using a native environment, it is assumed that you +have GNU cross compiling tools available in your path. In this case, +you must set the environment variable CROSS_COMPILE in your shell. +Note that no changes to the Makefile or any other source files are +necessary. For example using the ELDK on a 4xx CPU, please enter: + $ CROSS_COMPILE=ppc_4xx- + $ export CROSS_COMPILE -U-Boot is intended to be simple to build. After installing the -sources you must configure U-Boot for one specific board type. This +U-Boot is intended to be simple to build. After installing the +sources you must configure U-Boot for one specific board type. This is done by typing: make NAME_config -where "NAME_config" is the name of one of the existing -configurations; see the main Makefile for supported names. +where "NAME_config" is the name of one of the existing configu- +rations; see the main Makefile for supported names. Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for @@ -2503,20 +2524,20 @@ steps: Testing of U-Boot Modifications, Ports to New Hardware, etc.: ============================================================== -If you have modified U-Boot sources (for instance added a new board -or support for new devices, a new CPU, etc.) you are expected to +If you have modified U-Boot sources (for instance added a new board +or support for new devices, a new CPU, etc.) you are expected to provide feedback to the other developers. The feedback normally takes the form of a "patch", i. e. a context diff against a certain (latest -official or latest in CVS) version of U-Boot sources. +official or latest in the git repository) version of U-Boot sources. -But before you submit such a patch, please verify that your modifi- -cation did not break existing code. At least make sure that *ALL* of +But before you submit such a patch, please verify that your modifi- +cation did not break existing code. At least make sure that *ALL* of the supported boards compile WITHOUT ANY compiler warnings. To do so, just run the "MAKEALL" script, which will configure and build U-Boot -for ALL supported system. Be warned, this will take a while. You can -select which (cross) compiler to use by passing a `CROSS_COMPILE' -environment variable to the script, i. e. to use the cross tools from -MontaVista's Hard Hat Linux you can type +for ALL supported system. Be warned, this will take a while. You can +select which (cross) compiler to use by passing a `CROSS_COMPILE' +environment variable to the script, i. e. to use the ELDK cross tools +you can type CROSS_COMPILE=ppc_8xx- MAKEALL @@ -2524,20 +2545,21 @@ or to build on a native PowerPC system you can type CROSS_COMPILE=' ' MAKEALL -When using the MAKEALL script, the default behaviour is to build U-Boot -in the source directory. This location can be changed by setting the -BUILD_DIR environment variable. Also, for each target built, the MAKEALL -script saves two log files (.ERR and .MAKEALL) in the -/LOG directory. This default location can be changed by -setting the MAKEALL_LOGDIR environment variable. For example: +When using the MAKEALL script, the default behaviour is to build +U-Boot in the source directory. This location can be changed by +setting the BUILD_DIR environment variable. Also, for each target +built, the MAKEALL script saves two log files (.ERR and +.MAKEALL) in the /LOG directory. This default +location can be changed by setting the MAKEALL_LOGDIR environment +variable. For example: export BUILD_DIR=/tmp/build export MAKEALL_LOGDIR=/tmp/log CROSS_COMPILE=ppc_8xx- MAKEALL -With the above settings build objects are saved in the /tmp/build, log -files are saved in the /tmp/log and the source tree remains clean during -the whole build process. +With the above settings build objects are saved in the /tmp/build, +log files are saved in the /tmp/log and the source tree remains clean +during the whole build process. See also "U-Boot Porting Guide" below. @@ -3093,7 +3115,7 @@ TQM8xxL is in the first Flash bank): You can check the success of the download using the 'iminfo' command; -this includes a checksum verification so you can be sure no data +this includes a checksum verification so you can be sure no data corruption happened: => imi 40100000 @@ -3438,7 +3460,7 @@ models provide on-chip memory (like the IMMR area on MPC8xx and MPC826x processors), on others (parts of) the data cache can be locked as (mis-) used as memory, etc. - Chris Hallinan posted a good summary of these issues to the + Chris Hallinan posted a good summary of these issues to the u-boot-users mailing list: Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? @@ -3728,6 +3750,8 @@ may be rejected, even when they contain important and valuable stuff. Patches shall be sent to the u-boot-users mailing list. +Please see http://www.denx.de/wiki/UBoot/Patches for details. + When you send a patch, please include the following information with it: @@ -3748,18 +3772,23 @@ it: * If your patch adds new configuration options, don't forget to document these in the README file. -* The patch itself. If you are accessing the CVS repository use "cvs - update; cvs diff -puRN"; else, use "diff -purN OLD NEW". If your - version of diff does not support these options, then get the latest - version of GNU diff. +* The patch itself. If you are using git (which is *strongly* + recommended) you can easily generate the patch using the + "git-format-patch". If you then use "git-send-email" to send it to + the U-Boot mailing list, you will avoid most of the common problems + with some other mail clients. + + If you cannot use git, use "diff -purN OLD NEW". If your version of + diff does not support these options, then get the latest version of + GNU diff. - The current directory when running this command shall be the top - level directory of the U-Boot source tree, or it's parent directory - (i. e. please make sure that your patch includes sufficient - directory information for the affected files). + The current directory when running this command shall be the parent + directory of the U-Boot source tree (i. e. please make sure that + your patch includes sufficient directory information for the + affected files). - We accept patches as plain text, MIME attachments or as uuencoded - gzipped text. + We prefer patches as plain text. MIME attachments are discouraged, + and compressed attachments must not be used. * If one logical set of modifications affects or creates several files, all these changes shall be submitted in a SINGLE patch file. @@ -3786,4 +3815,6 @@ Notes: modification. * Remember that there is a size limit of 40 kB per message on the - u-boot-users mailing list. Compression may help. + u-boot-users mailing list. Bigger patches will be moderated. If + they are reasonable and not bigger than 100 kB, they will be + acknowledged. Even bigger patches should be avoided.