|
|
|
|
@ -1,3 +1,653 @@ |
|
|
|
|
commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7 |
|
|
|
|
Author: Mike Frysinger <vapier@gentoo.org> |
|
|
|
|
Date: Tue Apr 8 14:00:57 2008 -0400 |
|
|
|
|
|
|
|
|
|
Add support for u-boot in svn and localversion-* files |
|
|
|
|
|
|
|
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
|
|
|
|
|
|
|
|
|
commit d23ff6827decf121461fbc5622612fd7effe207e |
|
|
|
|
Author: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
Date: Thu Apr 3 17:04:22 2008 +0200 |
|
|
|
|
|
|
|
|
|
MX31ADS network and flash updates |
|
|
|
|
|
|
|
|
|
This patch allows U-Boot to use buffered writes to the Spansion NOR |
|
|
|
|
flash installed on this board, and eliminates long delays in network |
|
|
|
|
transfers after the board startup. |
|
|
|
|
|
|
|
|
|
Also modify flash layout to embed main and redundant environment |
|
|
|
|
blocks in the U-Boot image. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
|
|
|
|
|
commit b5dc9b304d289831f291843ff88a45cbdf1a6290 |
|
|
|
|
Author: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
Date: Mon Apr 14 10:53:12 2008 +0200 |
|
|
|
|
|
|
|
|
|
Support for the MX31ADS evaluation board from Freescale |
|
|
|
|
|
|
|
|
|
This patch adds support for the MX31ADS evaluation board from Freescale, |
|
|
|
|
initialization code is copied from RedBoot sources, also provided by |
|
|
|
|
Freescale. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
|
|
|
|
|
commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04 |
|
|
|
|
Author: Anatolij Gustschin <agust@denx.de> |
|
|
|
|
Date: Thu Apr 17 18:18:00 2008 +0200 |
|
|
|
|
|
|
|
|
|
Fix crash on sequoia in ppc_4xx_eth_init |
|
|
|
|
|
|
|
|
|
Currently U-Boot crashes in ppc_4xx_eth_init on sequoia |
|
|
|
|
with cache enabled (TLB Parity exeption). This patch |
|
|
|
|
fixes the problem. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Anatolij Gustschin <agust@denx.de> |
|
|
|
|
|
|
|
|
|
commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b |
|
|
|
|
Author: Anatolij Gustschin <agust@denx.de> |
|
|
|
|
Date: Thu Apr 17 18:15:27 2008 +0200 |
|
|
|
|
|
|
|
|
|
ppc4xx: Fix crash on sequoia with cache enabled |
|
|
|
|
|
|
|
|
|
Currently U-Boot crashes on sequoia board in CPU POST if |
|
|
|
|
cache is enabled (CONFIG_4xx_DCACHE defined). The cache |
|
|
|
|
won't be disabled by change_tlb before CPU POST because |
|
|
|
|
there is an insufficient adress range check since |
|
|
|
|
CFG_MEM_TOP_HIDE was introduced. This patch tries to fix |
|
|
|
|
this problem. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Anatolij Gustschin <agust@denx.de> |
|
|
|
|
|
|
|
|
|
commit 43c509254fab375c49936498da944658117ed07c |
|
|
|
|
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
|
|
|
|
Date: Thu Apr 17 23:35:13 2008 +0900 |
|
|
|
|
|
|
|
|
|
Use jr as register jump instruction |
|
|
|
|
|
|
|
|
|
Current assembler codes are inconsistent in the way of register jump |
|
|
|
|
instruction usage; some use jr, some use j. Of course GNU as allows both |
|
|
|
|
usages, but as can be expected from `Jump Register' the mnemonic `jr' is |
|
|
|
|
more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage |
|
|
|
|
at all. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
|
|
|
|
|
|
|
|
|
commit 7ce63709828d37b08866e537339a169bd0db2bd3 |
|
|
|
|
Author: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
Date: Tue Apr 15 14:15:30 2008 +0200 |
|
|
|
|
|
|
|
|
|
RTC driver for MC13783 |
|
|
|
|
|
|
|
|
|
MC13783 is a multifunction IS with an SPI interface to the host. This |
|
|
|
|
driver handles the RTC controller in this chip. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
|
|
|
|
|
commit 38254f45b0b412332726c90d3184ad47479fcffb |
|
|
|
|
Author: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
Date: Tue Apr 15 14:14:25 2008 +0200 |
|
|
|
|
|
|
|
|
|
New i.MX31 SPI driver |
|
|
|
|
|
|
|
|
|
This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far |
|
|
|
|
only implemented and tested on i.MX31, can with a modified register layout |
|
|
|
|
and definitions be used for i.MX27, I think, MXC CPUs have similar SPI |
|
|
|
|
controllers too. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
|
|
|
|
|
commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38 |
|
|
|
|
Author: Magnus Lilja <lilja.magnus@gmail.com> |
|
|
|
|
Date: Tue Apr 15 19:09:10 2008 +0200 |
|
|
|
|
|
|
|
|
|
Fix name of i.MX31 boards in config file header |
|
|
|
|
|
|
|
|
|
Correct the name of the i.MX31 Litekit and phyCORE boards in config files. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
|
|
|
|
|
|
|
|
|
commit a49864593e083a5d0779fb9ca98e5a0f2053183d |
|
|
|
|
Author: Mike Frysinger <vapier@gentoo.org> |
|
|
|
|
Date: Sun Apr 13 19:42:19 2008 -0400 |
|
|
|
|
|
|
|
|
|
allow ports to override go behavior |
|
|
|
|
|
|
|
|
|
Split the arch-specific logic out of the common go code and into a dedicated |
|
|
|
|
weak function called do_go_exec() that lives in cpu directories. This will |
|
|
|
|
need review from i386/nios people to make sure I didn't break them. |
|
|
|
|
|
|
|
|
|
commit 017e9b7925f74878d0e9475388cca9bda5ef9482 |
|
|
|
|
Author: Mike Frysinger <vapier@gentoo.org> |
|
|
|
|
Date: Sun Apr 13 19:42:18 2008 -0400 |
|
|
|
|
|
|
|
|
|
allow ports to override bootelf behavior |
|
|
|
|
|
|
|
|
|
Change the bootelf setup function into a dedicated weak function called |
|
|
|
|
do_bootelf_exec. This way ports can control the behavior however they |
|
|
|
|
like before/after calling the ELF entry point. |
|
|
|
|
|
|
|
|
|
commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7 |
|
|
|
|
Author: Ulf Samuelsson <ulf@atmel.com> |
|
|
|
|
Date: Sat Apr 12 20:56:03 2008 +0200 |
|
|
|
|
|
|
|
|
|
Reorder ARM boards in Makefile |
|
|
|
|
|
|
|
|
|
Rearrange ARM boards in Makefile so that ARM926EJ-S boards |
|
|
|
|
are no longer under ARM92xT header. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
|
|
|
|
Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
|
|
|
|
|
|
|
|
|
commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688 |
|
|
|
|
Author: Ulf Samuelsson <ulf@atmel.com> |
|
|
|
|
Date: Sat Apr 12 20:29:44 2008 +0200 |
|
|
|
|
|
|
|
|
|
Clean up dataflash partitioning |
|
|
|
|
|
|
|
|
|
This patch removes the board dependent parts from |
|
|
|
|
"drivers/mtd/dataflash.c". |
|
|
|
|
Each board relying on this, will have the appropriate |
|
|
|
|
code in a new file, "partition.c" in the board directory. |
|
|
|
|
board Makefiles updated to use the file. |
|
|
|
|
|
|
|
|
|
The dataflash partitions are aligned on sector/page boundaries. |
|
|
|
|
|
|
|
|
|
The CONFIG_NEW_DF_PARTITION was used to create named partitions |
|
|
|
|
This is now the default operation, and the CONFIG variable is removed. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
|
|
|
|
|
|
|
|
|
commit 51ecde946fec511a16346e498204ca10ad71080d |
|
|
|
|
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
|
|
|
|
Date: Sat Apr 12 14:08:45 2008 +0200 |
|
|
|
|
|
|
|
|
|
gitignore: udpate stgit generated and .patch file |
|
|
|
|
|
|
|
|
|
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
|
|
|
|
|
|
|
|
|
commit 66e39818e95f51ee1c1dd2094407a8929543fa6d |
|
|
|
|
Author: Wolfgang Denk <wd@denx.de> |
|
|
|
|
Date: Fri Apr 18 00:15:36 2008 -0700 |
|
|
|
|
|
|
|
|
|
Get rid of redundant copy of renamed header file. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de> |
|
|
|
|
|
|
|
|
|
commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc |
|
|
|
|
Author: Vlad Lungu <vlad@comsys.ro> |
|
|
|
|
Date: Fri Apr 11 21:20:14 2008 +0300 |
|
|
|
|
|
|
|
|
|
Fix dependency generation for older gcc versions |
|
|
|
|
|
|
|
|
|
With gcc 3.3.3 at least, compilation fails with |
|
|
|
|
|
|
|
|
|
Generating include/autoconf.mk |
|
|
|
|
gcc: compilation of header file requested |
|
|
|
|
make: *** [include/autoconf.mk] Error 1 |
|
|
|
|
|
|
|
|
|
since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
|
|
|
|
|
|
|
|
|
commit cb1c4896905ab22fcd982e6a8a539f0031942e71 |
|
|
|
|
Author: Marian Balakowicz <m8@semihalf.com> |
|
|
|
|
Date: Fri Apr 11 11:07:49 2008 +0200 |
|
|
|
|
|
|
|
|
|
Restore the ability to continue booting after legacy image overwrite |
|
|
|
|
|
|
|
|
|
Before new uImage code was merged, bootm code allowed for the kernel image to |
|
|
|
|
get overwritten during decompresion. new uImage introduced a check for image |
|
|
|
|
overwrites and refused to boot the image that got overwritten. This patch |
|
|
|
|
restores the old behavior. It also adds a warning when the image overwriten is |
|
|
|
|
a multi-image file, because in such case accessing componentes other than the |
|
|
|
|
first one will fail. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
|
|
|
|
|
|
|
|
|
commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036 |
|
|
|
|
Author: Marian Balakowicz <m8@semihalf.com> |
|
|
|
|
Date: Fri Apr 11 11:07:43 2008 +0200 |
|
|
|
|
|
|
|
|
|
ppc: Fix ftd_blob variable init when processing raw blob |
|
|
|
|
|
|
|
|
|
Set fdt_blob variable before its value is printed out. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
|
|
|
|
|
|
|
|
|
commit 3d36be030043cd841a2551d00a395135e363a64b |
|
|
|
|
Author: Jason Wessel <jason.wessel@windriver.com> |
|
|
|
|
Date: Thu Apr 10 14:30:16 2008 -0500 |
|
|
|
|
|
|
|
|
|
Remove all the search paths from the .lds files. |
|
|
|
|
|
|
|
|
|
The cross compiler is responsible for providing the correct libraries |
|
|
|
|
and the logic to find the linking libraries. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> |
|
|
|
|
|
|
|
|
|
commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58 |
|
|
|
|
Author: Bartlomiej Sieka <tur@semihalf.com> |
|
|
|
|
Date: Mon Apr 14 15:44:16 2008 +0200 |
|
|
|
|
|
|
|
|
|
Boot-related documentation update |
|
|
|
|
|
|
|
|
|
- document 'bootm_low' and 'bootm_size' environment variables |
|
|
|
|
- update inaccurate CFG_BOOTMAPSZ entry |
|
|
|
|
|
|
|
|
|
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
|
|
|
|
|
|
|
|
|
commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a |
|
|
|
|
Author: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
Date: Wed Apr 9 17:34:08 2008 +0200 |
|
|
|
|
|
|
|
|
|
Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code" |
|
|
|
|
|
|
|
|
|
Restore logic reverted by commit |
|
|
|
|
|
|
|
|
|
commit 80767a6cead9990d9e77e62be947843c2c72f469 |
|
|
|
|
Author: Peter Pearse <peter.pearse@arm.com> |
|
|
|
|
Date: Wed Sep 5 16:04:41 2007 +0100 |
|
|
|
|
|
|
|
|
|
Changed API name to coloured_led.h |
|
|
|
|
Removed code using deprecated ifdef CONFIG_BOOTBINFUNC |
|
|
|
|
Tidied other cpu/arm920t/start.S code |
|
|
|
|
|
|
|
|
|
Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
|
|
|
|
|
commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf |
|
|
|
|
Author: Mike Frysinger <vapier@gentoo.org> |
|
|
|
|
Date: Tue Apr 8 10:24:24 2008 -0400 |
|
|
|
|
|
|
|
|
|
Remove conflicting NAND ID |
|
|
|
|
|
|
|
|
|
There are two NAND entries with ID 0xDC and this obviously causes problems. |
|
|
|
|
In the kernel, they punted the first entry, so we should do the same. |
|
|
|
|
|
|
|
|
|
See this upstream e-mail for more info: |
|
|
|
|
http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html |
|
|
|
|
|
|
|
|
|
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> |
|
|
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
|
|
|
|
|
|
|
|
|
commit 188e94c370621708d13547d58dbc6ed3c5602aa8 |
|
|
|
|
Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
|
|
|
|
Date: Tue Apr 8 16:20:35 2008 +0900 |
|
|
|
|
|
|
|
|
|
cpu/mips/cpu.c: Fix flush_cache bug |
|
|
|
|
|
|
|
|
|
Cache operations have to take line address (addr), not start_addr. |
|
|
|
|
I noticed this bug when debugging ping failure. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
|
|
|
|
|
|
|
|
|
commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4 |
|
|
|
|
Author: Martin Krause <martin.krause@tqs.de> |
|
|
|
|
Date: Thu Apr 3 14:29:01 2008 +0200 |
|
|
|
|
|
|
|
|
|
TQM5200: fix default IDE reset level |
|
|
|
|
|
|
|
|
|
Before the first call of ide_reset(), the level of the IDE reset |
|
|
|
|
signal on the TQM5200 is low (reset asserted). This patch sets the |
|
|
|
|
default value to high (reset not asserted). |
|
|
|
|
|
|
|
|
|
Currently this patch fixes no real problem, but it is cleaner to |
|
|
|
|
assert the reset signal only on demand, and not permanently. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Martin Krause <martin.krause@tqs.de> |
|
|
|
|
|
|
|
|
|
commit c61e033d6e8abb7b4060ee36060961e1399f6079 |
|
|
|
|
Author: Detlev Zundel <dzu@denx.de> |
|
|
|
|
Date: Thu Apr 3 14:18:48 2008 +0200 |
|
|
|
|
|
|
|
|
|
mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING |
|
|
|
|
|
|
|
|
|
Signed-off-by: Detlev Zundel <dzu@denx.de> |
|
|
|
|
|
|
|
|
|
commit f308572e19eb7fe63aa3d41f214cde4c23c9800f |
|
|
|
|
Author: Detlev Zundel <dzu@denx.de> |
|
|
|
|
Date: Thu Apr 3 14:18:47 2008 +0200 |
|
|
|
|
|
|
|
|
|
mgcoge, mgsuv: rename 'addcon' to 'addcons' |
|
|
|
|
|
|
|
|
|
The latter name with 13 users is already established, so we will use |
|
|
|
|
that. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Detlev Zundel <dzu@denx.de> |
|
|
|
|
|
|
|
|
|
commit e175eacc87c3a9e4dad0799fee0e95732520afc7 |
|
|
|
|
Author: Martin Krause <martin.krause@tqs.de> |
|
|
|
|
Date: Thu Apr 3 13:37:56 2008 +0200 |
|
|
|
|
|
|
|
|
|
IDE: fix bug in reset sequence |
|
|
|
|
|
|
|
|
|
According to the ata (ata5) specification the RESET- signal |
|
|
|
|
shall be asserted for at least 25 us. Without this patch, |
|
|
|
|
the RESET- signal is asserted on some boards for only < 1 us |
|
|
|
|
(e. g. on the TQM5200). This patch adds a general delay of |
|
|
|
|
25 us to the RESET- signal. |
|
|
|
|
|
|
|
|
|
Without this patch a Platinum 4 GiB CF card is not recognised |
|
|
|
|
properly on boards with a TQM5200 (STK52xx, TB5200). |
|
|
|
|
|
|
|
|
|
Signed-off-by: Martin Krause <martin.krause@tqs.de> |
|
|
|
|
|
|
|
|
|
commit 813bea96a960916c72b4a3a7df840151529c26ce |
|
|
|
|
Author: Sascha Laue <Sascha.Laue@gmx.biz> |
|
|
|
|
Date: Thu Apr 3 14:43:11 2008 +0200 |
|
|
|
|
|
|
|
|
|
lwmon5: disable CONFIG_ZERO_BOOTDELAY |
|
|
|
|
|
|
|
|
|
Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> |
|
|
|
|
|
|
|
|
|
commit 53eec6f1d25932e76d63ccb14082792b0b96bf41 |
|
|
|
|
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
|
|
|
|
Date: Wed Apr 2 08:03:58 2008 +0200 |
|
|
|
|
|
|
|
|
|
ds174x: Fix warning on return in rtc_get and rtc_set functions |
|
|
|
|
|
|
|
|
|
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
|
|
|
|
|
|
|
|
|
commit a253b38bf50c85227c33ca0febc870ee49d1588e |
|
|
|
|
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
|
|
|
|
Date: Wed Apr 2 08:03:57 2008 +0200 |
|
|
|
|
|
|
|
|
|
cmd_log.c: Fix assignment differ in signedness |
|
|
|
|
|
|
|
|
|
In function 'logbuff_init_ptrs': |
|
|
|
|
cmd_log.c:79: warning: pointer targets in assignment differ in signedness |
|
|
|
|
|
|
|
|
|
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
|
|
|
|
|
|
|
|
|
commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df |
|
|
|
|
Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
|
|
|
|
Date: Wed Apr 2 11:04:43 2008 +0530 |
|
|
|
|
|
|
|
|
|
Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c |
|
|
|
|
|
|
|
|
|
Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in> |
|
|
|
|
|
|
|
|
|
commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d |
|
|
|
|
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
|
|
|
|
Date: Tue Apr 1 14:07:10 2008 +0200 |
|
|
|
|
|
|
|
|
|
s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame |
|
|
|
|
|
|
|
|
|
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
|
|
|
|
|
|
|
|
|
commit c08fb3ea36d19b1640b7906264581e9105534399 |
|
|
|
|
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
|
|
|
|
Date: Tue Apr 15 10:24:14 2008 +0200 |
|
|
|
|
|
|
|
|
|
Additional PCI IDs for IDE and network controllers |
|
|
|
|
|
|
|
|
|
These PCI IDs are required by the Linkstation platforms. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
|
|
|
|
|
|
|
|
|
commit c0559be371b2a64b1a817088c3308688e2182f93 |
|
|
|
|
Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> |
|
|
|
|
Date: Mon Apr 14 23:01:50 2008 +0200 |
|
|
|
|
|
|
|
|
|
Change env_get_char from a global function ptr to a function. |
|
|
|
|
|
|
|
|
|
This avoids an early global data reference. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
|
|
|
|
|
|
|
|
|
commit 3e0f331c05d72f140715c1e9fca991927e44d422 |
|
|
|
|
Author: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
Date: Tue Apr 29 12:35:08 2008 +0000 |
|
|
|
|
|
|
|
|
|
Clean up smsc911x driver |
|
|
|
|
|
|
|
|
|
Replace direct register address derefencing with accessor functions. |
|
|
|
|
Restrict explicitly 32-bit bus-width, extend affected configurations |
|
|
|
|
respectively. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
|
|
|
|
|
|
|
|
|
commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd |
|
|
|
|
Author: Sascha Hauer <s.hauer@pengutronix.de> |
|
|
|
|
Date: Tue Apr 15 00:08:20 2008 -0400 |
|
|
|
|
|
|
|
|
|
This patch adds a driver for the following smsc network controllers: |
|
|
|
|
LAN9115 |
|
|
|
|
LAN9116 |
|
|
|
|
LAN9117 |
|
|
|
|
LAN9215 |
|
|
|
|
LAN9216 |
|
|
|
|
LAN9217 |
|
|
|
|
|
|
|
|
|
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
|
|
|
|
Signed-off-by: Guennadi Liakhovetski<lg@denx.de> |
|
|
|
|
Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
|
|
|
|
|
|
|
|
|
commit 3dfd4aab929cccddb63d9ea509967861e1333b52 |
|
|
|
|
Author: Sascha Laue <Sascha.Laue@gmx.biz> |
|
|
|
|
Date: Tue Apr 1 15:13:03 2008 +0200 |
|
|
|
|
|
|
|
|
|
Fix watchdog POST for lwmon5 |
|
|
|
|
|
|
|
|
|
If the hardware watchdog detects a voltage error, the watchdog sets |
|
|
|
|
GPIO62 to low. The watchdog POST has to detect this low level. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i> |
|
|
|
|
|
|
|
|
|
commit 24b448448a917e52806f82660a5c9d47608894fb |
|
|
|
|
Author: Dave Liu <r63238@freescale.com> |
|
|
|
|
Date: Tue Apr 1 15:22:11 2008 +0800 |
|
|
|
|
|
|
|
|
|
ata: update the libata.h from ata.h of linux kernel |
|
|
|
|
|
|
|
|
|
Current libata.h of u-boot is out of sync from linux kernel, |
|
|
|
|
this patch make it be consistent with linux kernel. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com> |
|
|
|
|
Signed-off-by: Tor Krill <tor@excito.com> |
|
|
|
|
|
|
|
|
|
commit f8f9dc98883f66f59eb0601da65808e6b139c87c |
|
|
|
|
Author: Kumar Gala <galak@kernel.crashing.org> |
|
|
|
|
Date: Mon Mar 31 11:59:27 2008 -0500 |
|
|
|
|
|
|
|
|
|
Allow use of ARCH=powerpc when building |
|
|
|
|
|
|
|
|
|
The linux kernel is now mostly ARCH=powerpc, so to make life easier |
|
|
|
|
allow use to use ARCH=powerpc and convert it to ARCH=ppc. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
|
|
|
|
|
|
|
|
|
commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0 |
|
|
|
|
Author: Kyungmin Park <kmpark@infradead.org> |
|
|
|
|
Date: Mon Mar 31 10:40:54 2008 +0900 |
|
|
|
|
|
|
|
|
|
Add apollon board MAINTAINERS entry |
|
|
|
|
|
|
|
|
|
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
|
|
|
|
|
|
|
|
|
commit 77e475cc0ed1832160017d364be32a0be9ff02a9 |
|
|
|
|
Author: Kyungmin Park <kmpark@infradead.org> |
|
|
|
|
Date: Mon Mar 31 10:40:36 2008 +0900 |
|
|
|
|
|
|
|
|
|
Fix OneNAND read |
|
|
|
|
|
|
|
|
|
It should access with 16-bit instead of 8-bit |
|
|
|
|
|
|
|
|
|
Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
|
|
|
|
|
|
|
|
|
commit a9da2b41079d230db3a5641625311983f85ce1fb |
|
|
|
|
Author: Kyungmin Park <kmpark@infradead.org> |
|
|
|
|
Date: Mon Mar 31 10:40:19 2008 +0900 |
|
|
|
|
|
|
|
|
|
Fix OneNAND erase command |
|
|
|
|
|
|
|
|
|
It mis-calculates the block address. |
|
|
|
|
Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
|
|
|
|
|
|
|
|
|
commit 61525f2ffa156665a66908fda47dbf29d65ea579 |
|
|
|
|
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
|
|
|
|
Date: Mon Mar 31 01:32:15 2008 +0200 |
|
|
|
|
|
|
|
|
|
Support for LinkStation / KuroBox HD and HG PPC models |
|
|
|
|
|
|
|
|
|
This patch is based on the port by Mihai Georgian (see linkstation.c for |
|
|
|
|
Copyright information) and implements support for LinkStation / KuroBox HD |
|
|
|
|
and HG PPC models from Buffalo Technology, whereby HD is deactivated at |
|
|
|
|
the moment, pending network driver fixing. |
|
|
|
|
|
|
|
|
|
Notice to users: this is pretty much a barebone port. Support for network |
|
|
|
|
on HG models is already in the U-Boot mainline, but you might also want |
|
|
|
|
patches to switch fan / phy modes depending on the negotiated ethernet |
|
|
|
|
parameters. This patch also doesn't support console switching, booting EM |
|
|
|
|
mode, Buffalo specific ext2 magic number. So, if you want to use any of |
|
|
|
|
those, you need additional patches. Otherwise this patche provides a fully |
|
|
|
|
functional u-boot with a network console on your system. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
|
|
|
|
|
|
|
|
|
commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea |
|
|
|
|
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
|
|
|
|
Date: Sun Mar 30 01:22:13 2008 -0500 |
|
|
|
|
|
|
|
|
|
Add CONFIG_MII_INIT support to related boards |
|
|
|
|
|
|
|
|
|
Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in |
|
|
|
|
cmd_init.c. Add CONFIG_MII_INIT to board configuration files |
|
|
|
|
that use mii_init() in cmd_init.c. |
|
|
|
|
|
|
|
|
|
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
|
|
|
|
Acked-by: Ben Warren <biggerbadderben@gmail.com> |
|
|
|
|
|
|
|
|
|
commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4 |
|
|
|
|
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
|
|
|
|
Date: Sun Mar 30 01:19:06 2008 -0500 |
|
|
|
|
|
|
|
|
|
Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards |
|
|
|
|
|
|
|
|
|
Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define |
|
|
|
|
CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files. |
|
|
|
|
|
|
|
|
|
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
|
|
|
|
|
|
|
|
|
commit e99ccb488181d012248c6be30b2093e950319fc5 |
|
|
|
|
Author: Kumar Gala <galak@kernel.crashing.org> |
|
|
|
|
Date: Thu Mar 27 11:46:38 2008 -0500 |
|
|
|
|
|
|
|
|
|
Introduce phys_size_t and move phys_addr_t into asm/types.h |
|
|
|
|
|
|
|
|
|
Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's |
|
|
|
|
that have larger physical addresses like 44x, 85xx, and 86xx. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
|
|
|
|
|
|
|
|
|
commit 20a14a42a25f72e379f38460b8a8484667536795 |
|
|
|
|
Author: Andy Fleming <afleming@freescale.com> |
|
|
|
|
Date: Wed Apr 2 16:19:07 2008 -0500 |
|
|
|
|
|
|
|
|
|
Rename include/md5.h to include/u-boot/md5.h |
|
|
|
|
|
|
|
|
|
Some systems have md5.h installed in /usr/include/. This isn't the |
|
|
|
|
desired file (we want the one in include/md5.h). This will avoid the |
|
|
|
|
conflict. This fixes the host tools building problem by creating a new |
|
|
|
|
directory for U-Boot specific header files. |
|
|
|
|
|
|
|
|
|
[Patch by Andy Fleming, modified to use separate directory by Wolfgang |
|
|
|
|
Denk] |
|
|
|
|
|
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de> |
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com> |
|
|
|
|
Acked-by: Timur Tabi <timur@freescale.com> |
|
|
|
|
|
|
|
|
|
commit f297b7a1ec87433f66320d89d993e1bc738c66b8 |
|
|
|
|
Author: Dave Liu <r63238@freescale.com> |
|
|
|
|
Date: Thu Mar 27 18:51:17 2008 +0800 |
|
|
|
|
|
|
|
|
|
drivers: code clean up |
|
|
|
|
|
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com> |
|
|
|
|
|
|
|
|
|
commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597 |
|
|
|
|
Author: Dave Liu <r63238@freescale.com> |
|
|
|
|
Date: Thu Mar 27 18:50:41 2008 +0800 |
|
|
|
|
|
|
|
|
|
drivers: clean up the ata_piix.h |
|
|
|
|
|
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com> |
|
|
|
|
|
|
|
|
|
commit e8f7ba404f1409606962815ecc955a06984b08b3 |
|
|
|
|
Author: Dave Liu <r63238@freescale.com> |
|
|
|
|
Date: Thu Mar 27 18:49:56 2008 +0800 |
|
|
|
|
|
|
|
|
|
doc: english polishing for README.sata |
|
|
|
|
|
|
|
|
|
according to gvb's suggestion, polishing for the doc. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com> |
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com> |
|
|
|
|
|
|
|
|
|
commit 3e3f766a5274d204780460e1879723b565296d34 |
|
|
|
|
Author: Kumar Gala <galak@kernel.crashing.org> |
|
|
|
|
Date: Wed Mar 26 18:53:28 2008 -0500 |
|
|
|
|
|
|
|
|
|
Fix warnings introduced by I2C bus speed setting patch |
|
|
|
|
|
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
|
|
|
|
|
|
|
|
|
commit 3c735e7437150e8615f26930c7819db85634276d |
|
|
|
|
Author: eran liberty <eran.liberty@gmail.com> |
|
|
|
|
Date: Thu Mar 27 00:50:49 2008 +0100 |
|
|
|
|
|
|
|
|
|
Altera Stratix II support |
|
|
|
|
|
|
|
|
|
Adds Support for Altera's Stratix II. |
|
|
|
|
|
|
|
|
|
Within your board specific init file you will have to call |
|
|
|
|
|
|
|
|
|
1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off); |
|
|
|
|
2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc); |
|
|
|
|
|
|
|
|
|
Altera_desc* contines (for example): |
|
|
|
|
{ |
|
|
|
|
Altera_StratixII, /* part type */ |
|
|
|
|
passive_serial, /* interface type */ |
|
|
|
|
1, /* bytes of data part can accept */ |
|
|
|
|
(void *)(&funcs), /* interface function table */ |
|
|
|
|
0L, /* base interface address */ |
|
|
|
|
0 /* implementation specific cookie */ |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
funcs is the interface. It is of type altera_board_specific_func. |
|
|
|
|
It looks like this: |
|
|
|
|
altera_board_specific_func func = { |
|
|
|
|
pre_fn, |
|
|
|
|
config_fn, |
|
|
|
|
status_fn, |
|
|
|
|
done_fn, |
|
|
|
|
clk_fn, |
|
|
|
|
data_fn, |
|
|
|
|
abort_fn, |
|
|
|
|
post_fn, |
|
|
|
|
}; |
|
|
|
|
|
|
|
|
|
you will have to implement these functions, which is usually bit |
|
|
|
|
banging some gpio. |
|
|
|
|
|
|
|
|
|
Signed-off-by: Eran Liberty <liberty@extricom.com> |
|
|
|
|
|
|
|
|
|
commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335 |
|
|
|
|
Author: Wolfgang Denk <wd@denx.de> |
|
|
|
|
Date: Sun Apr 13 14:32:54 2008 -0700 |
|
|
|
|
|
|
|
|
|
Update CHANGELOG |
|
|
|
|
|
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de> |
|
|
|
|
|
|
|
|
|
commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7 |
|
|
|
|
Author: Sascha Hauer <s.hauer@pengutronix.de> |
|
|
|
|
Date: Wed Mar 26 20:41:17 2008 +0100 |
|
|
|
|
|
Wolfgang Denk
17 years ago