common/miiphyutil.c: Cleanup MII_DEBUG and debug()

Current MII_DEBUG is confusing in two ways. One is useless define-then-
undef at the top of the file. The other is there is only one debug() in
this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
While there are many useful printf()/puts() debug codes, but they are for
DEBUG, not for MII_DEBUG.

This patch tries to put them all together into MII_DEBUG and debug().

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
master
Shinya Kuribayashi 17 years ago committed by Wolfgang Denk
parent 751b9b5189
commit 26c7bab81e
  1. 31
      common/miiphyutil.c

@ -36,7 +36,6 @@
#include <net.h>
/* local debug macro */
#define MII_DEBUG
#undef MII_DEBUG
#undef debug
@ -261,31 +260,25 @@ int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
unsigned short tmp;
if (miiphy_read (devname, addr, PHY_PHYIDR2, &tmp) != 0) {
#ifdef DEBUG
puts ("PHY ID register 2 read failed\n");
#endif
debug ("PHY ID register 2 read failed\n");
return (-1);
}
reg = tmp;
#ifdef DEBUG
printf ("PHY_PHYIDR2 @ 0x%x = 0x%04x\n", addr, reg);
#endif
debug ("PHY_PHYIDR2 @ 0x%x = 0x%04x\n", addr, reg);
if (reg == 0xFFFF) {
/* No physical device present at this address */
return (-1);
}
if (miiphy_read (devname, addr, PHY_PHYIDR1, &tmp) != 0) {
#ifdef DEBUG
puts ("PHY ID register 1 read failed\n");
#endif
debug ("PHY ID register 1 read failed\n");
return (-1);
}
reg |= tmp << 16;
#ifdef DEBUG
printf ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
#endif
debug ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
*oui = (reg >> 10);
*model = (unsigned char)((reg >> 4) & 0x0000003F);
*rev = (unsigned char)(reg & 0x0000000F);
@ -304,15 +297,11 @@ int miiphy_reset (char *devname, unsigned char addr)
int loop_cnt;
if (miiphy_read (devname, addr, PHY_BMCR, &reg) != 0) {
#ifdef DEBUG
printf ("PHY status read failed\n");
#endif
debug ("PHY status read failed\n");
return (-1);
}
if (miiphy_write (devname, addr, PHY_BMCR, reg | 0x8000) != 0) {
#ifdef DEBUG
puts ("PHY reset failed\n");
#endif
debug ("PHY reset failed\n");
return (-1);
}
#ifdef CONFIG_PHY_RESET_DELAY
@ -327,9 +316,7 @@ int miiphy_reset (char *devname, unsigned char addr)
reg = 0x8000;
while (((reg & 0x8000) != 0) && (loop_cnt++ < 1000000)) {
if (miiphy_read (devname, addr, PHY_BMCR, &reg) != 0) {
# ifdef DEBUG
puts ("PHY status read failed\n");
# endif
debug ("PHY status read failed\n");
return (-1);
}
}

Loading…
Cancel
Save