Tom Rini
8 years ago
commit
26fb8db0f4
@ -0,0 +1,60 @@ |
||||
/* |
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ X11 |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
#include "rk3288-fennec.dtsi" |
||||
|
||||
/ { |
||||
model = "Rockchip RK3288 Fennec Board"; |
||||
compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; |
||||
|
||||
chosen { |
||||
stdout-path = &uart2; |
||||
}; |
||||
}; |
||||
|
||||
&dmc { |
||||
rockchip,num-channels = <2>; |
||||
rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d |
||||
0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6 |
||||
0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0 |
||||
0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4 |
||||
0x8 0x1f4>; |
||||
rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076 |
||||
0x0 0xc3 0x6 0x2>; |
||||
/* Add a dummy value to cause of-platdata think this is bytes */ |
||||
rockchip,sdram-channel = /bits/ 8 <0x2 0xa 0x3 0x2 0x2 0x0 0xe 0xe 0xff>; |
||||
rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
u-boot,dm-pre-reloc; |
||||
}; |
||||
|
||||
&pwm1 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart2 { |
||||
u-boot,dm-pre-reloc; |
||||
reg-shift = <2>; |
||||
}; |
||||
|
||||
&sdmmc { |
||||
u-boot,dm-pre-reloc; |
||||
}; |
||||
|
||||
&emmc { |
||||
u-boot,dm-pre-reloc; |
||||
}; |
||||
|
||||
&gpio3 { |
||||
u-boot,dm-pre-reloc; |
||||
}; |
||||
|
||||
&gpio8 { |
||||
u-boot,dm-pre-reloc; |
||||
}; |
||||
@ -0,0 +1,421 @@ |
||||
/* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively, |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use, |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
*/ |
||||
|
||||
#include "rk3288.dtsi" |
||||
|
||||
/ { |
||||
memory { |
||||
reg = <0x0 0x80000000>; |
||||
device_type = "memory"; |
||||
}; |
||||
|
||||
ext_gmac: external-gmac-clock { |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <125000000>; |
||||
clock-output-names = "ext_gmac"; |
||||
}; |
||||
|
||||
vcc_sys: vsys-regulator { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "vcc_sys"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
}; |
||||
|
||||
&cpu0 { |
||||
cpu0-supply = <&vdd_cpu>; |
||||
}; |
||||
|
||||
&emmc { |
||||
bus-width = <8>; |
||||
cap-mmc-highspeed; |
||||
disable-wp; |
||||
non-removable; |
||||
num-slots = <1>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&sdmmc { |
||||
bus-width = <4>; |
||||
cap-mmc-highspeed; |
||||
cap-sd-highspeed; |
||||
card-detect-delay = <200>; |
||||
disable-wp; |
||||
num-slots = <1>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; |
||||
status = "okay"; |
||||
vmmc-supply = <&vcc_sd>; |
||||
vqmmc-supply = <&vccio_sd>; |
||||
}; |
||||
|
||||
&gmac { |
||||
assigned-clocks = <&cru SCLK_MAC>; |
||||
assigned-clock-parents = <&ext_gmac>; |
||||
clock_in_out = "input"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; |
||||
phy-supply = <&vcc_lan>; |
||||
phy-mode = "rgmii"; |
||||
snps,reset-active-low; |
||||
snps,reset-delays-us = <0 10000 1000000>; |
||||
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; |
||||
tx_delay = <0x30>; |
||||
rx_delay = <0x10>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&gpu { |
||||
mali-supply = <&vdd_gpu>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&hdmi { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&i2c0 { |
||||
status = "okay"; |
||||
clock-frequency = <400000>; |
||||
|
||||
rk808: pmic@1b { |
||||
compatible = "rockchip,rk808"; |
||||
reg = <0x1b>; |
||||
interrupt-parent = <&gpio0>; |
||||
interrupts = <4 IRQ_TYPE_LEVEL_LOW>; |
||||
#clock-cells = <1>; |
||||
clock-output-names = "xin32k", "rk808-clkout2"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pmic_int &global_pwroff>; |
||||
rockchip,system-power-controller; |
||||
wakeup-source; |
||||
|
||||
vcc1-supply = <&vcc_sys>; |
||||
vcc2-supply = <&vcc_sys>; |
||||
vcc3-supply = <&vcc_sys>; |
||||
vcc4-supply = <&vcc_sys>; |
||||
vcc6-supply = <&vcc_sys>; |
||||
vcc7-supply = <&vcc_sys>; |
||||
vcc8-supply = <&vcc_io>; |
||||
vcc9-supply = <&vcc_io>; |
||||
vcc10-supply = <&vcc_io>; |
||||
vcc11-supply = <&vcc_io>; |
||||
vcc12-supply = <&vcc_io>; |
||||
vddio-supply = <&vcc_io>; |
||||
|
||||
regulators { |
||||
vdd_cpu: DCDC_REG1 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <750000>; |
||||
regulator-max-microvolt = <1350000>; |
||||
regulator-name = "vdd_arm"; |
||||
regulator-state-mem { |
||||
regulator-off-in-suspend; |
||||
}; |
||||
}; |
||||
|
||||
vdd_gpu: DCDC_REG2 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <850000>; |
||||
regulator-max-microvolt = <1250000>; |
||||
regulator-name = "vdd_gpu"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1000000>; |
||||
}; |
||||
}; |
||||
|
||||
vcc_ddr: DCDC_REG3 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-name = "vcc_ddr"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
}; |
||||
}; |
||||
|
||||
vcc_io: DCDC_REG4 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-name = "vcc_io"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <3300000>; |
||||
}; |
||||
}; |
||||
|
||||
vccio_pmu: LDO_REG1 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-name = "vccio_pmu"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <3300000>; |
||||
}; |
||||
}; |
||||
|
||||
vcca_33: LDO_REG2 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-name = "vcca_33"; |
||||
regulator-state-mem { |
||||
regulator-off-in-suspend; |
||||
}; |
||||
}; |
||||
|
||||
vdd_10: LDO_REG3 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <1000000>; |
||||
regulator-max-microvolt = <1000000>; |
||||
regulator-name = "vdd_10"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1000000>; |
||||
}; |
||||
}; |
||||
|
||||
vcc_wl: LDO_REG4 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-name = "vcc_wl"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1800000>; |
||||
}; |
||||
}; |
||||
|
||||
vccio_sd: LDO_REG5 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-name = "vccio_sd"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <3300000>; |
||||
}; |
||||
}; |
||||
|
||||
vdd10_lcd: LDO_REG6 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <1000000>; |
||||
regulator-max-microvolt = <1000000>; |
||||
regulator-name = "vdd10_lcd"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1000000>; |
||||
}; |
||||
}; |
||||
|
||||
vcc_18: LDO_REG7 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-name = "vcc_18"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1800000>; |
||||
}; |
||||
}; |
||||
|
||||
vcc18_lcd: LDO_REG8 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-name = "vcc18_lcd"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1800000>; |
||||
}; |
||||
}; |
||||
|
||||
vcc_sd: SWITCH_REG1 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-name = "vcc_sd"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
}; |
||||
}; |
||||
|
||||
vcc_lan: SWITCH_REG2 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-name = "vcc_lan"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
pcfg_output_high: pcfg-output-high { |
||||
output-high; |
||||
}; |
||||
|
||||
pcfg_output_low: pcfg-output-low { |
||||
output-low; |
||||
}; |
||||
|
||||
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { |
||||
drive-strength = <8>; |
||||
}; |
||||
|
||||
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { |
||||
bias-pull-up; |
||||
drive-strength = <8>; |
||||
}; |
||||
|
||||
gmac { |
||||
phy_int: phy-int { |
||||
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; |
||||
}; |
||||
|
||||
phy_pmeb: phy-pmeb { |
||||
rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; |
||||
}; |
||||
|
||||
phy_rst: phy-rst { |
||||
rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; |
||||
}; |
||||
}; |
||||
|
||||
pmic { |
||||
pmic_int: pmic-int { |
||||
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; |
||||
}; |
||||
}; |
||||
|
||||
sdmmc { |
||||
sdmmc_bus4: sdmmc-bus4 { |
||||
rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, |
||||
<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, |
||||
<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, |
||||
<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; |
||||
}; |
||||
|
||||
sdmmc_clk: sdmmc-clk { |
||||
rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; |
||||
}; |
||||
|
||||
sdmmc_cmd: sdmmc-cmd { |
||||
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; |
||||
}; |
||||
|
||||
sdmmc_pwr: sdmmc-pwr { |
||||
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; |
||||
}; |
||||
}; |
||||
|
||||
usbphy { |
||||
host_drv: host-drv { |
||||
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&uart2 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usbphy { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&host_drv>; |
||||
vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb_host0_ehci { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb_host1 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb_otg { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb_hsic { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&vopb { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&vopb_mmu { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&vopl { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&vopl_mmu { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&vpu { |
||||
status = "okay"; |
||||
}; |
||||
@ -0,0 +1,61 @@ |
||||
/* |
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ X11 |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
#include "rk3288-popmetal.dtsi" |
||||
|
||||
/ { |
||||
model = "PopMetal-RK3288"; |
||||
compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; |
||||
|
||||
chosen { |
||||
stdout-path = &uart2; |
||||
}; |
||||
}; |
||||
|
||||
&dmc { |
||||
rockchip,num-channels = <2>; |
||||
rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa |
||||
0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7 |
||||
0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0 |
||||
0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0 |
||||
0x5 0x0>; |
||||
rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200 |
||||
0xa60 0x40 0x10 0x0>; |
||||
/* Add a dummy value to cause of-platdata think this is bytes */ |
||||
rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf 0xff>; |
||||
rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>; |
||||
}; |
||||
|
||||
|
||||
&pinctrl { |
||||
u-boot,dm-pre-reloc; |
||||
}; |
||||
|
||||
&pwm1 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart2 { |
||||
u-boot,dm-pre-reloc; |
||||
reg-shift = <2>; |
||||
}; |
||||
|
||||
&sdmmc { |
||||
u-boot,dm-pre-reloc; |
||||
}; |
||||
|
||||
&emmc { |
||||
u-boot,dm-pre-reloc; |
||||
}; |
||||
|
||||
&gpio3 { |
||||
u-boot,dm-pre-reloc; |
||||
}; |
||||
|
||||
&gpio8 { |
||||
u-boot,dm-pre-reloc; |
||||
}; |
||||
@ -0,0 +1,520 @@ |
||||
/* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively, |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use, |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
*/ |
||||
|
||||
#include "rk3288.dtsi" |
||||
|
||||
/ { |
||||
memory{ |
||||
device_type = "memory"; |
||||
reg = <0 0x80000000>; |
||||
}; |
||||
|
||||
ext_gmac: external-gmac-clock { |
||||
compatible = "fixed-clock"; |
||||
clock-frequency = <125000000>; |
||||
clock-output-names = "ext_gmac"; |
||||
#clock-cells = <0>; |
||||
}; |
||||
|
||||
gpio-keys { |
||||
compatible = "gpio-keys"; |
||||
autorepeat; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pwrbtn>; |
||||
|
||||
power { |
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; |
||||
label = "GPIO Key Power"; |
||||
linux,input-type = <1>; |
||||
wakeup-source; |
||||
debounce-interval = <100>; |
||||
}; |
||||
}; |
||||
|
||||
io_domains: io-domains { |
||||
compatible = "rockchip,rk3288-io-voltage-domain"; |
||||
rockchip,grf = <&grf>; |
||||
|
||||
audio-supply = <&vcca_33>; |
||||
bb-supply = <&vcc_io>; |
||||
dvp-supply = <&vcc18_dvp>; |
||||
flash0-supply = <&vcc_flash>; |
||||
flash1-supply = <&vcc_lan>; |
||||
gpio30-supply = <&vcc_io>; |
||||
gpio1830-supply = <&vcc_io>; |
||||
lcdc-supply = <&vcc_io>; |
||||
sdcard-supply = <&vccio_sd>; |
||||
wifi-supply = <&vccio_wl>; |
||||
}; |
||||
|
||||
ir: ir-receiver { |
||||
compatible = "gpio-ir-receiver"; |
||||
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&ir_int>; |
||||
}; |
||||
|
||||
vcc_flash: flash-regulator { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "vcc_flash"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
vin-supply = <&vcc_io>; |
||||
}; |
||||
|
||||
vcc_sd: sdmmc-regulator { |
||||
compatible = "regulator-fixed"; |
||||
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&sdmmc_pwr>; |
||||
regulator-name = "vcc_sd"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
startup-delay-us = <100000>; |
||||
vin-supply = <&vcc_io>; |
||||
}; |
||||
|
||||
vcc_sys: vsys-regulator { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "vcc_sys"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
/* |
||||
* A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled |
||||
* by the dvp_pwr pin. |
||||
*/ |
||||
vcc18_dvp: vcc18-dvp-regulator { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "vcc18-dvp"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
vin-supply = <&vcc28_dvp>; |
||||
}; |
||||
|
||||
vcc28_dvp: vcc28-dvp-regulator { |
||||
compatible = "regulator-fixed"; |
||||
enable-active-high; |
||||
gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&dvp_pwr>; |
||||
regulator-name = "vcc28_dvp"; |
||||
regulator-min-microvolt = <2800000>; |
||||
regulator-max-microvolt = <2800000>; |
||||
regulator-always-on; |
||||
vin-supply = <&vcc_io>; |
||||
}; |
||||
}; |
||||
|
||||
&cpu0 { |
||||
cpu0-supply = <&vdd_cpu>; |
||||
}; |
||||
|
||||
&emmc { |
||||
bus-width = <8>; |
||||
cap-mmc-highspeed; |
||||
disable-wp; |
||||
non-removable; |
||||
num-slots = <1>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; |
||||
vmmc-supply = <&vcc_io>; |
||||
vqmmc-supply = <&vcc_flash>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&sdmmc { |
||||
bus-width = <4>; |
||||
cap-mmc-highspeed; |
||||
cap-sd-highspeed; |
||||
card-detect-delay = <200>; |
||||
disable-wp; |
||||
num-slots = <1>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; |
||||
vmmc-supply = <&vcc_sd>; |
||||
vqmmc-supply = <&vccio_sd>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&gmac { |
||||
phy-supply = <&vcc_lan>; |
||||
phy-mode = "rgmii"; |
||||
clock_in_out = "input"; |
||||
snps,reset-gpio = <&gpio4 7 0>; |
||||
snps,reset-active-low; |
||||
snps,reset-delays-us = <0 10000 1000000>; |
||||
assigned-clocks = <&cru SCLK_MAC>; |
||||
assigned-clock-parents = <&ext_gmac>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&rgmii_pins>; |
||||
tx_delay = <0x30>; |
||||
rx_delay = <0x10>; |
||||
status = "ok"; |
||||
}; |
||||
|
||||
&hdmi { |
||||
ddc-i2c-bus = <&i2c5>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&i2c0 { |
||||
status = "okay"; |
||||
clock-frequency = <400000>; |
||||
|
||||
rk808: pmic@1b { |
||||
compatible = "rockchip,rk808"; |
||||
reg = <0x1b>; |
||||
interrupt-parent = <&gpio0>; |
||||
interrupts = <4 IRQ_TYPE_LEVEL_LOW>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pmic_int &global_pwroff>; |
||||
rockchip,system-power-controller; |
||||
wakeup-source; |
||||
#clock-cells = <1>; |
||||
clock-output-names = "xin32k", "rk808-clkout2"; |
||||
|
||||
vcc1-supply = <&vcc_sys>; |
||||
vcc2-supply = <&vcc_sys>; |
||||
vcc3-supply = <&vcc_sys>; |
||||
vcc4-supply = <&vcc_sys>; |
||||
vcc6-supply = <&vcc_sys>; |
||||
vcc7-supply = <&vcc_sys>; |
||||
vcc8-supply = <&vcc_18>; |
||||
vcc9-supply = <&vcc_io>; |
||||
vcc10-supply = <&vcc_io>; |
||||
vcc11-supply = <&vcc_sys>; |
||||
vcc12-supply = <&vcc_io>; |
||||
vddio-supply = <&vcc_io>; |
||||
|
||||
regulators { |
||||
vdd_cpu: DCDC_REG1 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <750000>; |
||||
regulator-max-microvolt = <1350000>; |
||||
regulator-name = "vdd_arm"; |
||||
regulator-state-mem { |
||||
regulator-off-in-suspend; |
||||
}; |
||||
}; |
||||
|
||||
vdd_gpu: DCDC_REG2 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <850000>; |
||||
regulator-max-microvolt = <1250000>; |
||||
regulator-name = "vdd_gpu"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1000000>; |
||||
}; |
||||
}; |
||||
|
||||
vcc_ddr: DCDC_REG3 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-name = "vcc_ddr"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
}; |
||||
}; |
||||
|
||||
vcc_io: DCDC_REG4 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-name = "vcc_io"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <3300000>; |
||||
}; |
||||
}; |
||||
|
||||
vcc_lan: LDO_REG1 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-name = "vcc_lan"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <3300000>; |
||||
}; |
||||
}; |
||||
|
||||
vccio_sd: LDO_REG2 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-name = "vccio_sd"; |
||||
regulator-state-mem { |
||||
regulator-off-in-suspend; |
||||
}; |
||||
}; |
||||
|
||||
vdd_10: LDO_REG3 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <1000000>; |
||||
regulator-max-microvolt = <1000000>; |
||||
regulator-name = "vdd_10"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1000000>; |
||||
}; |
||||
}; |
||||
|
||||
vcc18_lcd: LDO_REG4 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-name = "vcc18_lcd"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1800000>; |
||||
}; |
||||
}; |
||||
|
||||
ldo5: LDO_REG5 { |
||||
regulator-always-on; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-name = "ldo5"; |
||||
}; |
||||
|
||||
vdd10_lcd: LDO_REG6 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <1000000>; |
||||
regulator-max-microvolt = <1000000>; |
||||
regulator-name = "vdd10_lcd"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1000000>; |
||||
}; |
||||
}; |
||||
|
||||
vcc_18: LDO_REG7 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-name = "vcc_18"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <1800000>; |
||||
}; |
||||
}; |
||||
|
||||
vcca_33: LDO_REG8 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-name = "vcca_33"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
regulator-suspend-microvolt = <3300000>; |
||||
}; |
||||
}; |
||||
|
||||
vccio_wl: SWITCH_REG1 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-name = "vccio_wl"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
}; |
||||
}; |
||||
|
||||
vcc_lcd: SWITCH_REG2 { |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
regulator-name = "vcc_lcd"; |
||||
regulator-state-mem { |
||||
regulator-on-in-suspend; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&i2c1 { |
||||
status = "okay"; |
||||
clock-frequency = <400000>; |
||||
|
||||
ak8963: ak8963@0d { |
||||
compatible = "asahi-kasei,ak8975"; |
||||
reg = <0x0d>; |
||||
interrupt-parent = <&gpio8>; |
||||
interrupts = <1 IRQ_TYPE_EDGE_RISING>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&comp_int>; |
||||
}; |
||||
|
||||
l3g4200d: l3g4200d@68 { |
||||
compatible = "st,l3g4200d-gyro"; |
||||
st,drdy-int-pin = <2>; |
||||
reg = <0x6b>; |
||||
}; |
||||
|
||||
mma8452: mma8452@1d { |
||||
compatible = "fsl,mma8452"; |
||||
reg = <0x1d>; |
||||
interrupt-parent = <&gpio8>; |
||||
interrupts = <0 IRQ_TYPE_EDGE_RISING>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&gsensor_int>; |
||||
}; |
||||
}; |
||||
|
||||
&i2c2 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&i2c3 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&i2c4 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&i2c5 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
ak8963 { |
||||
comp_int: comp-int { |
||||
rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; |
||||
}; |
||||
}; |
||||
|
||||
buttons { |
||||
pwrbtn: pwrbtn { |
||||
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; |
||||
}; |
||||
}; |
||||
|
||||
dvp { |
||||
dvp_pwr: dvp-pwr { |
||||
rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>; |
||||
}; |
||||
}; |
||||
|
||||
ir { |
||||
ir_int: ir-int { |
||||
rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; |
||||
}; |
||||
}; |
||||
|
||||
mma8452 { |
||||
gsensor_int: gsensor-int { |
||||
rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; |
||||
}; |
||||
}; |
||||
|
||||
pmic { |
||||
pmic_int: pmic-int { |
||||
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; |
||||
}; |
||||
}; |
||||
|
||||
sdmmc { |
||||
sdmmc_pwr: sdmmc-pwr { |
||||
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&tsadc { |
||||
rockchip,hw-tshut-mode = <0>; |
||||
rockchip,hw-tshut-polarity = <0>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&vopb { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&vopb_mmu { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&vopl { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&vopl_mmu { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart0 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart1 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart2 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart3 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart4 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usbphy { |
||||
status = "okay"; |
||||
}; |
||||
@ -0,0 +1,15 @@ |
||||
if TARGET_POPMETAL_RK3288 |
||||
|
||||
config SYS_BOARD |
||||
default "popmetal_rk3288" |
||||
|
||||
config SYS_VENDOR |
||||
default "chipspark" |
||||
|
||||
config SYS_CONFIG_NAME |
||||
default "popmetal_rk3288" |
||||
|
||||
config BOARD_SPECIFIC_OPTIONS # dummy |
||||
def_bool y |
||||
|
||||
endif |
||||
@ -0,0 +1,6 @@ |
||||
POPMETAL-RK3288 |
||||
M: Lin Huang <hl@rock-chips.com> |
||||
S: Maintained |
||||
F: board/chipspark/popmetal_rk3288 |
||||
F: include/configs/popmetal_rk3288.h |
||||
F: configs/popmetal-rk3288_defconfig |
||||
@ -0,0 +1,7 @@ |
||||
#
|
||||
# (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += popmetal-rk3288.o
|
||||
@ -0,0 +1,15 @@ |
||||
/*
|
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <spl.h> |
||||
|
||||
void board_boot_order(u32 *spl_boot_list) |
||||
{ |
||||
/* eMMC prior to sdcard */ |
||||
spl_boot_list[0] = BOOT_DEVICE_MMC2; |
||||
spl_boot_list[1] = BOOT_DEVICE_MMC1; |
||||
} |
||||
@ -1,6 +1,6 @@ |
||||
EVB-RK3036 |
||||
M: huang lin <hl@rock-chips.com> |
||||
S: Maintained |
||||
F: board/evb/evb-rk3036 |
||||
F: include/configs/evb-rk3036.h |
||||
F: board/rockchip/evb_rk3036 |
||||
F: include/configs/evb_rk3036.h |
||||
F: configs/evb-rk3036_defconfig |
||||
|
||||
@ -1,13 +1,13 @@ |
||||
if TARGET_EVB_RK3288 |
||||
|
||||
config SYS_BOARD |
||||
default "evb-rk3288" |
||||
default "evb_rk3288" |
||||
|
||||
config SYS_VENDOR |
||||
default "evb-rk3288" |
||||
default "rockchip" |
||||
|
||||
config SYS_CONFIG_NAME |
||||
default "evb-rk3288" |
||||
default "evb_rk3288" |
||||
|
||||
config BOARD_SPECIFIC_OPTIONS # dummy |
||||
def_bool y |
||||
@ -1,6 +1,6 @@ |
||||
EVB-RK3288 |
||||
M: Lin Huang <hl@rock-chips.com> |
||||
S: Maintained |
||||
F: board/evb-rk3288/evb-rk3288 |
||||
F: include/configs/evb-rk3288.h |
||||
F: board/rockchip/evb_rk3288 |
||||
F: include/configs/evb_rk3288.h |
||||
F: configs/evb-rk3288_defconfig |
||||
@ -0,0 +1,15 @@ |
||||
if TARGET_FENNEC_RK3288 |
||||
|
||||
config SYS_BOARD |
||||
default "fennec_rk3288" |
||||
|
||||
config SYS_VENDOR |
||||
default "rockchip" |
||||
|
||||
config SYS_CONFIG_NAME |
||||
default "fennec_rk3288" |
||||
|
||||
config BOARD_SPECIFIC_OPTIONS # dummy |
||||
def_bool y |
||||
|
||||
endif |
||||
@ -0,0 +1,6 @@ |
||||
FENNEC-RK3288 |
||||
M: Lin Huang <hl@rock-chips.com> |
||||
S: Maintained |
||||
F: board/rockchip/fennec_rk3288 |
||||
F: include/configs/fennec_rk3288.h |
||||
F: configs/fennec-rk3288_defconfig |
||||
@ -0,0 +1,7 @@ |
||||
#
|
||||
# (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += fennec-rk3288.o
|
||||
@ -0,0 +1,15 @@ |
||||
/*
|
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <spl.h> |
||||
|
||||
void board_boot_order(u32 *spl_boot_list) |
||||
{ |
||||
/* eMMC prior to sdcard */ |
||||
spl_boot_list[0] = BOOT_DEVICE_MMC2; |
||||
spl_boot_list[1] = BOOT_DEVICE_MMC1; |
||||
} |
||||
@ -1,6 +1,6 @@ |
||||
KYLIN-RK3036 |
||||
M: huang lin <hl@rock-chips.com> |
||||
S: Maintained |
||||
F: board/kylin/kylin-rk3036 |
||||
F: include/configs/kylin-rk3036.h |
||||
F: board/rockchip/kylin_rk3036 |
||||
F: include/configs/kylin_rk3036.h |
||||
F: configs/kylin-rk3036_defconfig |
||||
|
||||
@ -0,0 +1,66 @@ |
||||
CONFIG_ARM=y |
||||
CONFIG_ARCH_ROCKCHIP=y |
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000 |
||||
CONFIG_ROCKCHIP_RK3288=y |
||||
CONFIG_TARGET_FENNEC_RK3288=y |
||||
CONFIG_SPL_STACK_R_ADDR=0x80000 |
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3288-fennec" |
||||
CONFIG_SPL_STACK_R=y |
||||
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 |
||||
CONFIG_HUSH_PARSER=y |
||||
CONFIG_CMD_BOOTZ=y |
||||
# CONFIG_CMD_IMLS is not set |
||||
CONFIG_CMD_MMC=y |
||||
CONFIG_CMD_SF=y |
||||
CONFIG_CMD_SPI=y |
||||
CONFIG_CMD_I2C=y |
||||
CONFIG_CMD_GPIO=y |
||||
# CONFIG_CMD_SETEXPR is not set |
||||
CONFIG_CMD_DHCP=y |
||||
CONFIG_CMD_MII=y |
||||
CONFIG_CMD_PING=y |
||||
CONFIG_CMD_CACHE=y |
||||
CONFIG_CMD_TIME=y |
||||
CONFIG_CMD_PMIC=y |
||||
CONFIG_CMD_REGULATOR=y |
||||
CONFIG_CMD_EXT2=y |
||||
CONFIG_CMD_EXT4=y |
||||
CONFIG_CMD_FAT=y |
||||
CONFIG_CMD_FS_GENERIC=y |
||||
CONFIG_SPL_OF_CONTROL=y |
||||
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" |
||||
CONFIG_REGMAP=y |
||||
CONFIG_SPL_REGMAP=y |
||||
CONFIG_SYSCON=y |
||||
CONFIG_SPL_SYSCON=y |
||||
CONFIG_CLK=y |
||||
CONFIG_SPL_CLK=y |
||||
CONFIG_ROCKCHIP_GPIO=y |
||||
CONFIG_SYS_I2C_ROCKCHIP=y |
||||
CONFIG_SYSRESET=y |
||||
CONFIG_DM_MMC=y |
||||
CONFIG_ROCKCHIP_DWMMC=y |
||||
CONFIG_PINCTRL=y |
||||
# CONFIG_PINCTRL_FULL is not set |
||||
CONFIG_SPL_PINCTRL=y |
||||
# CONFIG_SPL_PINCTRL_FULL is not set |
||||
CONFIG_ROCKCHIP_RK3288_PINCTRL=y |
||||
CONFIG_DM_PMIC=y |
||||
CONFIG_PMIC_RK808=y |
||||
CONFIG_DM_REGULATOR=y |
||||
CONFIG_REGULATOR_RK808=y |
||||
CONFIG_DM_REGULATOR_FIXED=y |
||||
CONFIG_DM_PWM=y |
||||
CONFIG_PWM_ROCKCHIP=y |
||||
CONFIG_RAM=y |
||||
CONFIG_SPL_RAM=y |
||||
CONFIG_DEBUG_UART=y |
||||
CONFIG_DEBUG_UART_BASE=0xff690000 |
||||
CONFIG_DEBUG_UART_CLOCK=24000000 |
||||
CONFIG_DEBUG_UART_SHIFT=2 |
||||
CONFIG_SYS_NS16550=y |
||||
CONFIG_USE_PRIVATE_LIBGCC=y |
||||
CONFIG_USE_TINY_PRINTF=y |
||||
CONFIG_CMD_DHRYSTONE=y |
||||
CONFIG_ERRNO_STR=y |
||||
# CONFIG_SPL_SIMPLE_BUS is not set |
||||
@ -0,0 +1,65 @@ |
||||
CONFIG_ARM=y |
||||
CONFIG_ARCH_ROCKCHIP=y |
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000 |
||||
CONFIG_ROCKCHIP_RK3288=y |
||||
CONFIG_TARGET_POPMETAL_RK3288=y |
||||
CONFIG_SPL_STACK_R_ADDR=0x80000 |
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3288-popmetal" |
||||
CONFIG_SPL_STACK_R=y |
||||
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 |
||||
CONFIG_HUSH_PARSER=y |
||||
CONFIG_CMD_BOOTZ=y |
||||
# CONFIG_CMD_IMLS is not set |
||||
CONFIG_CMD_MMC=y |
||||
CONFIG_CMD_SF=y |
||||
CONFIG_CMD_SPI=y |
||||
CONFIG_CMD_I2C=y |
||||
CONFIG_CMD_GPIO=y |
||||
# CONFIG_CMD_SETEXPR is not set |
||||
CONFIG_CMD_DHCP=y |
||||
CONFIG_CMD_MII=y |
||||
CONFIG_CMD_PING=y |
||||
CONFIG_CMD_CACHE=y |
||||
CONFIG_CMD_TIME=y |
||||
CONFIG_CMD_PMIC=y |
||||
CONFIG_CMD_REGULATOR=y |
||||
CONFIG_CMD_EXT2=y |
||||
CONFIG_CMD_EXT4=y |
||||
CONFIG_CMD_FAT=y |
||||
CONFIG_CMD_FS_GENERIC=y |
||||
CONFIG_SPL_OF_CONTROL=y |
||||
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" |
||||
CONFIG_REGMAP=y |
||||
CONFIG_SPL_REGMAP=y |
||||
CONFIG_SYSCON=y |
||||
CONFIG_SPL_SYSCON=y |
||||
# CONFIG_SPL_SIMPLE_BUS is not set |
||||
CONFIG_CLK=y |
||||
CONFIG_SPL_CLK=y |
||||
CONFIG_ROCKCHIP_GPIO=y |
||||
CONFIG_SYS_I2C_ROCKCHIP=y |
||||
CONFIG_SYSRESET=y |
||||
CONFIG_DM_MMC=y |
||||
CONFIG_ROCKCHIP_DWMMC=y |
||||
CONFIG_PINCTRL=y |
||||
CONFIG_SPL_PINCTRL=y |
||||
# CONFIG_SPL_PINCTRL_FULL is not set |
||||
CONFIG_ROCKCHIP_RK3288_PINCTRL=y |
||||
CONFIG_DM_PMIC=y |
||||
CONFIG_PMIC_RK808=y |
||||
CONFIG_DM_REGULATOR=y |
||||
CONFIG_REGULATOR_RK808=y |
||||
CONFIG_DM_REGULATOR_FIXED=y |
||||
CONFIG_DM_PWM=y |
||||
CONFIG_PWM_ROCKCHIP=y |
||||
CONFIG_RAM=y |
||||
CONFIG_SPL_RAM=y |
||||
CONFIG_DEBUG_UART=y |
||||
CONFIG_DEBUG_UART_BASE=0xff690000 |
||||
CONFIG_DEBUG_UART_CLOCK=24000000 |
||||
CONFIG_DEBUG_UART_SHIFT=2 |
||||
CONFIG_SYS_NS16550=y |
||||
CONFIG_USE_PRIVATE_LIBGCC=y |
||||
CONFIG_USE_TINY_PRINTF=y |
||||
CONFIG_CMD_DHRYSTONE=y |
||||
CONFIG_ERRNO_STR=y |
||||
@ -0,0 +1,26 @@ |
||||
/*
|
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef __CONFIG_H |
||||
#define __CONFIG_H |
||||
|
||||
#define ROCKCHIP_DEVICE_SETTINGS |
||||
#include <configs/rk3288_common.h> |
||||
|
||||
#define CONFIG_SPL_MMC_SUPPORT |
||||
|
||||
#define CONFIG_ENV_IS_IN_MMC |
||||
#define CONFIG_SYS_MMC_ENV_DEV 1 |
||||
/* SPL @ 32k for ~36k
|
||||
* ENV @ 96k |
||||
* u-boot @ 128K |
||||
*/ |
||||
#define CONFIG_ENV_OFFSET (96 * 1024) |
||||
|
||||
#define CONFIG_SYS_WHITE_ON_BLACK |
||||
#define CONFIG_CONSOLE_SCROLL_LINES 10 |
||||
|
||||
#endif |
||||
@ -0,0 +1,26 @@ |
||||
/*
|
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef __CONFIG_H |
||||
#define __CONFIG_H |
||||
|
||||
#define ROCKCHIP_DEVICE_SETTINGS |
||||
#include <configs/rk3288_common.h> |
||||
|
||||
#define CONFIG_SPL_MMC_SUPPORT |
||||
|
||||
#define CONFIG_ENV_IS_IN_MMC |
||||
#define CONFIG_SYS_MMC_ENV_DEV 1 |
||||
/* SPL @ 32k for ~36k
|
||||
* ENV @ 96k |
||||
* u-boot @ 128K |
||||
*/ |
||||
#define CONFIG_ENV_OFFSET (96 * 1024) |
||||
|
||||
#define CONFIG_SYS_WHITE_ON_BLACK |
||||
#define CONFIG_CONSOLE_SCROLL_LINES 10 |
||||
|
||||
#endif |
||||
Loading…
Reference in new issue