arm: atmel: sama5d3: add nand spl boot support

Add NAND SPL boot support with hardware PMECC.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

arch/arm/cpu/at91-common/spl.c

@@ -52,6 +52,8 @@ u32 spl_boot_device(void)
 {
 #ifdef CONFIG_SYS_USE_MMC
 	return BOOT_DEVICE_MMC1;
+#elif CONFIG_SYS_USE_NANDFLASH
+	return BOOT_DEVICE_NAND;
 #elif CONFIG_SYS_USE_SERIALFLASH
 	return BOOT_DEVICE_SPI;
 #endif

arch/arm/include/asm/arch-at91/spl.h

@@ -14,6 +14,8 @@ enum {
 	BOOT_DEVICE_MMC1,
 	BOOT_DEVICE_MMC2,
 	BOOT_DEVICE_MMC2_2,
+#elif CONFIG_SYS_USE_NANDFLASH
+	BOOT_DEVICE_NAND,
 #elif CONFIG_SYS_USE_SERIALFLASH
 	BOOT_DEVICE_SPI,
 #endif

board/atmel/sama5d3xek/sama5d3xek.c

@@ -307,6 +307,8 @@ void spl_board_init(void)
 {
 #ifdef CONFIG_SYS_USE_MMC
 	sama5d3xek_mci_hw_init();
+#elif CONFIG_SYS_USE_NANDFLASH
+	sama5d3xek_nand_hw_init();
 #elif CONFIG_SYS_USE_SERIALFLASH
 	at91_spi0_hw_init(1 << 0);
 #endif

include/configs/sama5d3xek.h

@@ -270,6 +270,18 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
 
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+
 #elif CONFIG_SYS_USE_SERIALFLASH
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT