Move DECLARE_GLOBAL_DATA_PTR to file scope

It can be optimised out by the compiler otherwise resulting
in obscure errors like a board not booting.

This has been documented in README since 2006 when these were
first fixed up for GCC 4.x.

Signed-off-by: John Rigby <john.rigby@linaro.org>

Fix some additional places.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-By: Albert ARIBAUD <albert.aribaud@free.fr>
master
John Rigby 14 years ago committed by Wolfgang Denk
parent 71aab09b2c
commit 2956532625
  1. 6
      arch/arm/cpu/armv7/mx5/speed.c
  2. 3
      arch/blackfin/cpu/serial.c
  3. 3
      arch/m68k/cpu/mcf52x2/cpu.c
  4. 4
      arch/m68k/cpu/mcf547x_8x/speed.c
  5. 7
      arch/sh/lib/board.c
  6. 4
      board/espt/espt.c
  7. 4
      board/isee/igep0020/igep0020.c
  8. 4
      board/isee/igep0030/igep0030.c
  9. 3
      board/linkstation/linkstation.c
  10. 4
      board/logicpd/zoom1/zoom1.c
  11. 3
      board/logicpd/zoom2/zoom2.c
  12. 4
      board/mpr2/mpr2.c
  13. 4
      board/ms7720se/ms7720se.c
  14. 4
      board/ms7722se/ms7722se.c
  15. 4
      board/ms7750se/ms7750se.c
  16. 4
      board/overo/overo.c
  17. 4
      board/pandora/pandora.c
  18. 4
      board/renesas/MigoR/migo_r.c
  19. 4
      board/renesas/ap325rxa/ap325rxa.c
  20. 4
      board/renesas/r2dplus/r2dplus.c
  21. 4
      board/renesas/r7780mp/r7780mp.c
  22. 4
      board/renesas/rsk7203/rsk7203.c
  23. 4
      board/renesas/sh7763rdp/sh7763rdp.c
  24. 4
      board/renesas/sh7785lcr/sh7785lcr.c
  25. 6
      board/samsung/smdk6400/smdk6400.c
  26. 4
      board/ti/beagle/beagle.c
  27. 4
      board/ti/evm/evm.c
  28. 4
      board/ti/sdp3430/sdp.c
  29. 3
      drivers/i2c/omap24xx_i2c.c
  30. 3
      drivers/serial/s3c64xx.c
  31. 3
      drivers/serial/serial_s5p.c
  32. 4
      drivers/serial/serial_sh.c

@ -28,10 +28,12 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#ifdef CONFIG_FSL_ESDHC
DECLARE_GLOBAL_DATA_PTR;
#endif
int get_clocks(void)
{
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_FSL_ESDHC
gd->sdhc_clk = mxc_get_clock(MXC_IPG_PERCLK);
#endif

@ -42,6 +42,8 @@
#include <asm/blackfin.h>
#include <asm/mach-common/bits/uart.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_UART_CONSOLE
#include "serial.h"
@ -95,7 +97,6 @@ void serial_set_baud(uint32_t baud)
*/
void serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
serial_set_baud(gd->baudrate);
}

@ -74,8 +74,7 @@ int watchdog_disable(void)
{
volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
wdt->sr = 0x5555; /* reset watchdog counteDECLARE_GLOBAL_DATA_PTR;
r */
wdt->sr = 0x5555; /* reset watchdog counter */
wdt->sr = 0xAAAA;
wdt->cr = 0; /* disable watchdog timer */

@ -30,13 +30,13 @@
#include <asm/immap.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* get_clocks() fills in gd->cpu_clock and gd->bus_clk
*/
int get_clocks(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bus_clk = CONFIG_SYS_CLK;
gd->cpu_clk = (gd->bus_clk * 2);

@ -32,6 +32,8 @@
#include <miiphy.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
extern int cpu_init(void);
extern int board_init(void);
extern int dram_init(void);
@ -43,8 +45,6 @@ unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
static int sh_flash_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_flashsize = flash_init();
printf("FLASH: %ldMB\n", gd->bd->bi_flashsize / (1024*1024));
@ -99,7 +99,6 @@ static int sh_mem_env_init(void)
#if defined(CONFIG_CMD_NET)
static int sh_net_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
return 0;
}
@ -139,8 +138,6 @@ init_fnc_t *init_sequence[] =
void sh_generic_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
bd_t *bd;
init_fnc_t **init_fnc_ptr;

@ -24,6 +24,8 @@
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("BOARD: ESPT-GIGA\n");
@ -37,8 +39,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -32,6 +32,8 @@
#include <asm/mach-types.h>
#include "igep0020.h"
DECLARE_GLOBAL_DATA_PTR;
/* GPMC definitions for LAN9221 chips */
static const u32 gpmc_lan_config[] = {
NET_LAN9221_GPMC_CONFIG1,
@ -48,8 +50,6 @@ static const u32 gpmc_lan_config[] = {
*/
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_IGEP0020;

@ -30,14 +30,14 @@
#include <asm/mach-types.h>
#include "igep0030.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* Routine: board_init
* Description: Early hardware init.
*/
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_IGEP0030;

@ -32,11 +32,12 @@
#include <pci.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
extern void init_AVR_DUART(void);
int checkboard (void)
{
DECLARE_GLOBAL_DATA_PTR;
char *p;
bd_t *bd = gd->bd;

@ -39,14 +39,14 @@
#include <asm/mach-types.h>
#include "zoom1.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* Routine: board_init
* Description: Early hardware init.
*/
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_OMAP_LDP;

@ -43,6 +43,8 @@
#include "zoom2.h"
#include "zoom2_serial.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* This the the zoom2, board specific, gpmc configuration for the
* quad uart on the debug board. The more general gpmc configurations
@ -120,7 +122,6 @@ void zoom2_identify(void)
*/
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
u32 *gpmc_config;
gpmc_init (); /* in SRAM or SDRAM, finish GPMC */

@ -24,6 +24,8 @@
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("BOARD: MPR2\n");
@ -152,8 +154,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("SDRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -30,6 +30,8 @@
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
#define LED_BASE 0xB0800000
int checkboard(void)
@ -45,8 +47,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -28,6 +28,8 @@
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
#define LED_BASE 0xB0800000
int checkboard(void)
@ -46,8 +48,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -24,6 +24,8 @@
#include <common.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("BOARD: SH7750/SH7750S/SH7750R Solution Engine\n");
@ -37,8 +39,6 @@ int board_init(void)
int dram_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -40,6 +40,8 @@
#include <asm/mach-types.h>
#include "overo.h"
DECLARE_GLOBAL_DATA_PTR;
#define TWL4030_I2C_BUS 0
#define EXPANSION_EEPROM_I2C_BUS 2
#define EXPANSION_EEPROM_I2C_ADDRESS 0x51
@ -87,8 +89,6 @@ static const u32 gpmc_lan_config[] = {
*/
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_OVERO;

@ -37,6 +37,8 @@
#include <asm/mach-types.h>
#include "pandora.h"
DECLARE_GLOBAL_DATA_PTR;
#define TWL4030_BB_CFG_BBCHEN (1 << 4)
#define TWL4030_BB_CFG_BBSEL_3200MV (3 << 2)
#define TWL4030_BB_CFG_BBISEL_500UA 2
@ -47,8 +49,6 @@
*/
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_OMAP3_PANDORA;

@ -28,6 +28,8 @@
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("BOARD: Renesas MigoR\n");
@ -41,8 +43,6 @@ int board_init(void)
int dram_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -23,6 +23,8 @@
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
/* PRI control register */
#define PRPRICR5 0xFF800048 /* LMB */
#define PRPRICR5_D 0x2a
@ -143,8 +145,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -28,6 +28,8 @@
#include <asm/io.h>
#include <asm/pci.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("BOARD: Renesas Solutions R2D Plus\n");
@ -41,8 +43,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -26,6 +26,8 @@
#include <netdev.h>
#include "r7780mp.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
#if defined(CONFIG_R7780MP)
@ -46,8 +48,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -26,6 +26,8 @@
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("BOARD: Renesas Technology RSK7203\n");
@ -39,8 +41,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -25,6 +25,8 @@
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
#define CPU_CMDREG 0xB1000006
#define PDCR 0xffef0006
#define PECR 0xffef0008
@ -64,8 +66,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -23,6 +23,8 @@
#include <asm/pci.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("BOARD: Renesas Technology Corp. R0P7785LC0011RL\n");
@ -36,8 +38,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));

@ -32,6 +32,8 @@
#include <netdev.h>
#include <asm/arch/s3c6400.h>
DECLARE_GLOBAL_DATA_PTR;
/* ------------------------------------------------------------------------- */
#define CS8900_Tacs 0x0 /* 0clk address set-up */
#define CS8900_Tcos 0x4 /* 4clk chip selection set-up */
@ -63,8 +65,6 @@ static void cs8900_pre_init(void)
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
cs8900_pre_init();
/* NOR-flash in SROM0 */
@ -80,8 +80,6 @@ int board_init(void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;

@ -51,6 +51,8 @@
#define BEAGLE_NO_EEPROM 0xffffffff
DECLARE_GLOBAL_DATA_PTR;
static struct {
unsigned int device_vendor;
unsigned char revision;
@ -66,8 +68,6 @@ static struct {
*/
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE;

@ -37,6 +37,8 @@
#include <asm/mach-types.h>
#include "evm.h"
DECLARE_GLOBAL_DATA_PTR;
static u32 omap3_evm_version;
u32 get_omap3_evm_rev(void)
@ -103,8 +105,6 @@ u8 omap3_evm_need_extvbus(void)
*/
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_OMAP3EVM;

@ -31,6 +31,8 @@
#include <asm/mach-types.h>
#include "sdp.h"
DECLARE_GLOBAL_DATA_PTR;
const omap3_sysinfo sysinfo = {
DDR_DISCRETE,
"OMAP3 SDP3430 board",
@ -101,8 +103,6 @@ extern struct gpmc *gpmc_cfg;
*/
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* TODO: Dynamically pop out CS mapping and program accordingly */
/* Configure devices for default ON ON ON settings */

@ -27,6 +27,8 @@
#include "omap24xx_i2c.h"
DECLARE_GLOBAL_DATA_PTR;
#define I2C_TIMEOUT 1000
static void wait_for_bb (void);
@ -40,7 +42,6 @@ static unsigned int current_bus;
void i2c_init (int speed, int slaveadd)
{
DECLARE_GLOBAL_DATA_PTR;
int psc, fsscll, fssclh;
int hsscll = 0, hssclh = 0;
u32 scll, sclh;

@ -25,6 +25,8 @@
#include <asm/arch/s3c6400.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SERIAL1
#define UART_NR S3C64XX_UART0
@ -68,7 +70,6 @@ static const int udivslot[] = {
void serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
u32 pclk = get_PCLK();
u32 baudrate = gd->baudrate;

@ -27,6 +27,8 @@
#include <asm/arch/clk.h>
#include <serial.h>
DECLARE_GLOBAL_DATA_PTR;
static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
{
u32 offset = dev_index * sizeof(struct s5p_uart);
@ -61,7 +63,6 @@ static const int udivslot[] = {
void serial_setbrg_dev(const int dev_index)
{
DECLARE_GLOBAL_DATA_PTR;
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
u32 uclk = get_uart_clk(dev_index);
u32 baudrate = gd->baudrate;

@ -21,6 +21,8 @@
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CONS_SCIF0)
# define SCIF_BASE SCIF0_BASE
#elif defined(CONFIG_CONS_SCIF1)
@ -131,8 +133,6 @@
void serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
writeb(SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ), SCBRR);
}

Loading…
Cancel
Save