Tegra: Change Tegra20 to Tegra in common code, prep for T30

Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate.
Convert tegra20_ source file and function names to tegra_, also.

Upcoming Tegra30 port will use common code/defines/names where possible.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>

arch/arm/cpu/arm720t/tegra20/cpu.c

@@ -105,14 +105,14 @@ static void enable_cpu_clock(int enable)
 
 static int is_cpu_powered(void)
 {
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 
 	return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0;
 }
 
 static void remove_cpu_io_clamps(void)
 {
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 	u32 reg;
 
 	/* Remove the clamps on the CPU I/O signals */
@@ -126,7 +126,7 @@ static void remove_cpu_io_clamps(void)
 
 static void powerup_cpu(void)
 {
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 	u32 reg;
 	int timeout = IO_STABILIZATION_DELAY;
 
@@ -157,7 +157,7 @@ static void powerup_cpu(void)
 
 static void enable_cpu_power_rail(void)
 {
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 	u32 reg;
 
 	reg = readl(&pmc->pmc_cntrl);

arch/arm/cpu/armv7/tegra20/cmd_enterrcm.c

@@ -46,7 +46,7 @@
 static int do_enterrcm(cmd_tbl_t *cmdtp, int flag, int argc,
 		       char * const argv[])
 {
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 
 	puts("Entering RCM...\n");
 	udelay(50000);

arch/arm/cpu/tegra20-common/Makefile

@@ -33,7 +33,7 @@ LIB	= $(obj)lib$(SOC)-common.o
 
 SOBJS += lowlevel_init.o
 COBJS-y	+= ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o
-COBJS-$(CONFIG_TEGRA20_LP0) += warmboot.o crypto.o warmboot_avp.o
+COBJS-$(CONFIG_TEGRA_LP0) += warmboot.o crypto.o warmboot_avp.o
 COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
 COBJS-$(CONFIG_TEGRA_PMU) += pmu.o
 

arch/arm/cpu/tegra20-common/ap20.c

@@ -32,7 +32,7 @@
 int tegra_get_chip_type(void)
 {
 	struct apb_misc_gp_ctlr *gp;
-	struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE;
+	struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
 	uint tegra_sku_id, rev;
 
 	/*
@@ -40,7 +40,7 @@ int tegra_get_chip_type(void)
 	 * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
 	 * Tegra30
 	 */
-	gp = (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+	gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
 	rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
 
 	tegra_sku_id = readl(&fuse->sku_info) & 0xff;
@@ -101,7 +101,7 @@ static u32 get_odmdata(void)
 
 static void init_pmc_scratch(void)
 {
-	struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 	u32 odmdata;
 	int i;
 

arch/arm/cpu/tegra20-common/board.c

@@ -47,7 +47,7 @@ enum {
 
 unsigned int query_sdram_size(void)
 {
-	struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 	u32 reg;
 
 	reg = readl(&pmc->pmc_scratch20);
@@ -81,11 +81,11 @@ int checkboard(void)
 #endif	/* CONFIG_DISPLAY_BOARDINFO */
 
 static int uart_configs[] = {
-#if defined(CONFIG_TEGRA20_UARTA_UAA_UAB)
+#if defined(CONFIG_TEGRA_UARTA_UAA_UAB)
 	FUNCMUX_UART1_UAA_UAB,
-#elif defined(CONFIG_TEGRA20_UARTA_GPU)
+#elif defined(CONFIG_TEGRA_UARTA_GPU)
 	FUNCMUX_UART1_GPU,
-#elif defined(CONFIG_TEGRA20_UARTA_SDIO1)
+#elif defined(CONFIG_TEGRA_UARTA_SDIO1)
 	FUNCMUX_UART1_SDIO1,
 #else
 	FUNCMUX_UART1_IRRX_IRTX,
@@ -125,13 +125,13 @@ void board_init_uart_f(void)
 {
 	int uart_ids = 0;	/* bit mask of which UART ids to enable */
 
-#ifdef CONFIG_TEGRA20_ENABLE_UARTA
+#ifdef CONFIG_TEGRA_ENABLE_UARTA
 	uart_ids |= UARTA;
 #endif
-#ifdef CONFIG_TEGRA20_ENABLE_UARTB
+#ifdef CONFIG_TEGRA_ENABLE_UARTB
 	uart_ids |= UARTB;
 #endif
-#ifdef CONFIG_TEGRA20_ENABLE_UARTD
+#ifdef CONFIG_TEGRA_ENABLE_UARTD
 	uart_ids |= UARTD;
 #endif
 	setup_uarts(uart_ids);

arch/arm/cpu/tegra20-common/warmboot.c

@@ -39,7 +39,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifndef CONFIG_TEGRA_CLOCK_SCALING
-#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA20_LP0"
+#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA_LP0"
 #endif
 
 /*
@@ -139,9 +139,9 @@ int warmboot_save_sdram_params(void)
 	u32 ram_code;
 	struct sdram_params sdram;
 	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 	struct apb_misc_gp_ctlr *gp =
-			(struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+			(struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
 	struct emc_ctlr *emc = emc_get_controller(gd->fdt_blob);
 	union scratch2_reg scratch2;
 	union scratch4_reg scratch4;
@@ -205,7 +205,7 @@ static u32 get_major_version(void)
 {
 	u32 major_id;
 	struct apb_misc_gp_ctlr *gp =
-		(struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+		(struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
 
 	major_id = (readl(&gp->hidrev) & HIDREV_MAJORPREV_MASK) >>
 			HIDREV_MAJORPREV_SHIFT;
@@ -229,7 +229,7 @@ static int is_failure_analysis_mode(struct fuse_regs *fuse)
 
 static int ap20_is_odm_production_mode(void)
 {
-	struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE;
+	struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
 
 	if (!is_failure_analysis_mode(fuse) &&
 	    is_odm_production_mode_fuse_set(fuse))
@@ -240,7 +240,7 @@ static int ap20_is_odm_production_mode(void)
 
 static int ap20_is_production_mode(void)
 {
-	struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE;
+	struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
 
 	if (get_major_version() == 0)
 		return 1;
@@ -257,7 +257,7 @@ static enum fuse_operating_mode fuse_get_operation_mode(void)
 {
 	u32 chip_id;
 	struct apb_misc_gp_ctlr *gp =
-		(struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+		(struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
 
 	chip_id = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >>
 			HIDREV_CHIPID_SHIFT;

arch/arm/cpu/tegra20-common/warmboot_avp.c

@@ -38,7 +38,7 @@
 void wb_start(void)
 {
 	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
 	struct clk_rst_ctlr *clkrst =
 			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;

arch/arm/include/asm/arch-tegra20/ap20.h

@@ -95,9 +95,6 @@
 #define HALT_COP_EVENT_IRQ_1		(1 << 11)
 #define HALT_COP_EVENT_FIQ_1		(1 << 9)
 
-/* Start up the tegra20 SOC */
-void tegra20_start(void);
-
 /* This is the main entry into U-Boot, used by the Cortex-A9 */
 extern void _start(void);
 

arch/arm/include/asm/arch-tegra20/mmc.h

@@ -19,9 +19,9 @@
  * MA 02111-1307 USA
  */
 
-#ifndef _TEGRA20_MMC_H_
-#define _TEGRA20_MMC_H_
+#ifndef _TEGRA_MMC_H_
+#define _TEGRA_MMC_H_
 
-int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
+int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
 
-#endif /* TEGRA20_MMC_H_ */
+#endif /* _TEGRA_MMC_H_ */

arch/arm/include/asm/arch-tegra20/sys_proto.h

@@ -24,12 +24,12 @@
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
 
-struct tegra20_sysinfo {
+struct tegra_sysinfo {
 	char *board_string;
 };
 
 void invalidate_dcache(void);
 
-extern const struct tegra20_sysinfo sysinfo;
+extern const struct tegra_sysinfo sysinfo;
 
 #endif

arch/arm/include/asm/arch-tegra20/tegra20.h

@@ -33,22 +33,22 @@
 #define NV_PA_GPIO_BASE		0x6000D000
 #define NV_PA_EVP_BASE		0x6000F000
 #define NV_PA_APB_MISC_BASE	0x70000000
-#define TEGRA20_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800)
+#define NV_PA_APB_MISC_GP_BASE	(NV_PA_APB_MISC_BASE + 0x0800)
 #define NV_PA_APB_UARTA_BASE	(NV_PA_APB_MISC_BASE + 0x6000)
 #define NV_PA_APB_UARTB_BASE	(NV_PA_APB_MISC_BASE + 0x6040)
 #define NV_PA_APB_UARTC_BASE	(NV_PA_APB_MISC_BASE + 0x6200)
 #define NV_PA_APB_UARTD_BASE	(NV_PA_APB_MISC_BASE + 0x6300)
 #define NV_PA_APB_UARTE_BASE	(NV_PA_APB_MISC_BASE + 0x6400)
-#define TEGRA20_NAND_BASE	(NV_PA_APB_MISC_BASE + 0x8000)
-#define TEGRA20_SPI_BASE	(NV_PA_APB_MISC_BASE + 0xC380)
-#define TEGRA20_PMC_BASE	(NV_PA_APB_MISC_BASE + 0xE400)
-#define TEGRA20_FUSE_BASE	(NV_PA_APB_MISC_BASE + 0xF800)
+#define NV_PA_NAND_BASE		(NV_PA_APB_MISC_BASE + 0x8000)
+#define NV_PA_SPI_BASE		(NV_PA_APB_MISC_BASE + 0xC380)
+#define NV_PA_PMC_BASE		(NV_PA_APB_MISC_BASE + 0xE400)
+#define NV_PA_FUSE_BASE		(NV_PA_APB_MISC_BASE + 0xF800)
 #define NV_PA_CSITE_BASE	0x70040000
 #define TEGRA_USB1_BASE		0xC5000000
 #define TEGRA_USB3_BASE		0xC5008000
 #define TEGRA_USB_ADDR_MASK	0xFFFFC000
 
-#define TEGRA20_SDRC_CS0	NV_PA_SDRAM_BASE
+#define NV_PA_SDRC_CS0		NV_PA_SDRAM_BASE
 #define LOW_LEVEL_SRAM_STACK	0x4000FFFC
 #define EARLY_AVP_STACK		(NV_PA_SDRAM_BASE + 0x20000)
 #define EARLY_CPU_STACK		(EARLY_AVP_STACK - 4096)
@@ -86,7 +86,7 @@ enum {
 };
 
 #else  /* __ASSEMBLY__ */
-#define PRM_RSTCTRL		TEGRA20_PMC_BASE
+#define PRM_RSTCTRL		NV_PA_PMC_BASE
 #endif
 
 #endif	/* TEGRA20_H */

arch/arm/include/asm/arch-tegra20/tegra_mmc.h

@@ -22,13 +22,13 @@
 #ifndef __TEGRA_MMC_H_
 #define __TEGRA_MMC_H_
 
-#define TEGRA20_SDMMC1_BASE	0xC8000000
-#define TEGRA20_SDMMC2_BASE	0xC8000200
-#define TEGRA20_SDMMC3_BASE	0xC8000400
-#define TEGRA20_SDMMC4_BASE	0xC8000600
+#define TEGRA_SDMMC1_BASE	0xC8000000
+#define TEGRA_SDMMC2_BASE	0xC8000200
+#define TEGRA_SDMMC3_BASE	0xC8000400
+#define TEGRA_SDMMC4_BASE	0xC8000600
 
 #ifndef __ASSEMBLY__
-struct tegra20_mmc {
+struct tegra_mmc {
 	unsigned int	sysad;		/* _SYSTEM_ADDRESS_0 */
 	unsigned short	blksize;	/* _BLOCK_SIZE_BLOCK_COUNT_0 15:00 */
 	unsigned short	blkcnt;		/* _BLOCK_SIZE_BLOCK_COUNT_0 31:16 */
@@ -118,7 +118,7 @@ struct tegra20_mmc {
 #define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE			(1 << 1)
 
 struct mmc_host {
-	struct tegra20_mmc *reg;
+	struct tegra_mmc *reg;
 	unsigned int version;	/* SDHCI spec. version */
 	unsigned int clock;	/* Current clock (MHz) */
 	unsigned int base;	/* Base address, SDMMC1/2/3/4 */

arch/arm/include/asm/arch-tegra20/tegra_spi.h

@@ -70,6 +70,6 @@ struct spi_tegra {
 #define SPI_STAT_CUR_BLKCNT		(1 << 15)
 
 #define SPI_TIMEOUT		1000
-#define TEGRA20_SPI_MAX_FREQ	52000000
+#define TEGRA_SPI_MAX_FREQ	52000000
 
 #endif	/* _TEGRA_SPI_H_ */

arch/arm/include/asm/arch-tegra20/timer.h

@@ -21,8 +21,8 @@
 
 /* Tegra20 timer functions */
 
-#ifndef _TEGRA20_TIMER_H
-#define _TEGRA20_TIMER_H
+#ifndef _TEGRA_TIMER_H
+#define _TEGRA_TIMER_H
 
 /* returns the current monotonic timer value in microseconds */
 unsigned long timer_get_us(void);

board/avionic-design/common/tamonten.c

@@ -78,7 +78,7 @@ int board_mmc_init(bd_t *bd)
 	pin_mux_mmc();
 
 	/* init dev 0, SD slot, with 4-bit bus */
-	tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
+	tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
 
 	return 0;
 }

board/compal/paz00/paz00.c

@@ -70,11 +70,11 @@ int board_mmc_init(bd_t *bd)
 	debug("board_mmc_init: init eMMC\n");
 	/* init dev 0, eMMC chip, with 4-bit bus */
 	/* The board has an 8-bit bus, but 8-bit doesn't work yet */
-	tegra20_mmc_init(0, 4, -1, -1);
+	tegra_mmc_init(0, 4, -1, -1);
 
 	debug("board_mmc_init: init SD slot\n");
 	/* init dev 3, SD slot, with 4-bit bus */
-	tegra20_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
+	tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
 
 	return 0;
 }

board/compulab/trimslice/trimslice.c

@@ -69,10 +69,10 @@ int board_mmc_init(bd_t *bd)
 	pin_mux_mmc();
 
 	/* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */
-	tegra20_mmc_init(0, 4, -1, GPIO_PP1);
+	tegra_mmc_init(0, 4, -1, GPIO_PP1);
 
 	/* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */
-	tegra20_mmc_init(3, 4, -1, -1);
+	tegra_mmc_init(3, 4, -1, -1);
 
 	return 0;
 }

board/nvidia/common/board.c

@@ -45,8 +45,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-const struct tegra20_sysinfo sysinfo = {
-	CONFIG_TEGRA20_BOARD_STRING
+const struct tegra_sysinfo sysinfo = {
+	CONFIG_TEGRA_BOARD_STRING
 };
 
 #ifndef CONFIG_SPL_BUILD
@@ -79,7 +79,7 @@ void pin_mux_spi(void) __attribute__((weak, alias("__pin_mux_spi")));
 static void power_det_init(void)
 {
 #if defined(CONFIG_TEGRA20)
-	struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
 
 	/* turn off power detects */
 	writel(0, &pmc->pmc_pwr_det_latch);
@@ -132,7 +132,7 @@ int board_init(void)
 	board_usb_init(gd->fdt_blob);
 #endif
 
-#ifdef CONFIG_TEGRA20_LP0
+#ifdef CONFIG_TEGRA_LP0
 	/* save Sdram params to PMC 2, 4, and 24 for WB0 */
 	warmboot_save_sdram_params();
 

board/nvidia/harmony/harmony.c

@@ -73,11 +73,11 @@ int board_mmc_init(bd_t *bd)
 	debug("board_mmc_init: init SD slot J26\n");
 	/* init dev 0, SD slot J26, with 4-bit bus */
 	/* The board has an 8-bit bus, but 8-bit doesn't work yet */
-	tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
+	tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
 
 	debug("board_mmc_init: init SD slot J5\n");
 	/* init dev 2, SD slot J5, with 4-bit bus */
-	tegra20_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
+	tegra_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
 
 	return 0;
 }

board/nvidia/seaboard/seaboard.c

@@ -81,11 +81,11 @@ int board_mmc_init(bd_t *bd)
 	debug("board_mmc_init: init eMMC\n");
 	/* init dev 0, eMMC chip, with 4-bit bus */
 	/* The board has an 8-bit bus, but 8-bit doesn't work yet */
-	tegra20_mmc_init(0, 4, -1, -1);
+	tegra_mmc_init(0, 4, -1, -1);
 
 	debug("board_mmc_init: init SD slot\n");
 	/* init dev 1, SD slot, with 4-bit bus */
-	tegra20_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
+	tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
 
 	return 0;
 }

board/nvidia/whistler/whistler.c

@@ -81,10 +81,10 @@ int board_mmc_init(bd_t *bd)
 	pin_mux_mmc();
 
 	/* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */
-	tegra20_mmc_init(0, 8, -1, -1);
+	tegra_mmc_init(0, 8, -1, -1);
 
 	/* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */
-	tegra20_mmc_init(1, 8, -1, -1);
+	tegra_mmc_init(1, 8, -1, -1);
 
 	return 0;
 }

drivers/gpio/tegra_gpio.c

@@ -34,10 +34,10 @@
 #include <asm/gpio.h>
 
 enum {
-	TEGRA20_CMD_INFO,
-	TEGRA20_CMD_PORT,
-	TEGRA20_CMD_OUTPUT,
-	TEGRA20_CMD_INPUT,
+	TEGRA_CMD_INFO,
+	TEGRA_CMD_PORT,
+	TEGRA_CMD_OUTPUT,
+	TEGRA_CMD_INPUT,
 };
 
 static struct gpio_names {

drivers/i2c/tegra_i2c.c

@@ -262,7 +262,7 @@ exit:
 	return error;
 }
 
-static int tegra20_i2c_write_data(u32 addr, u8 *data, u32 len)
+static int tegra_i2c_write_data(u32 addr, u8 *data, u32 len)
 {
 	int error;
 	struct i2c_trans_info trans_info;
@@ -275,12 +275,12 @@ static int tegra20_i2c_write_data(u32 addr, u8 *data, u32 len)
 
 	error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
 	if (error)
-		debug("tegra20_i2c_write_data: Error (%d) !!!\n", error);
+		debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
 
 	return error;
 }
 
-static int tegra20_i2c_read_data(u32 addr, u8 *data, u32 len)
+static int tegra_i2c_read_data(u32 addr, u8 *data, u32 len)
 {
 	int error;
 	struct i2c_trans_info trans_info;
@@ -293,7 +293,7 @@ static int tegra20_i2c_read_data(u32 addr, u8 *data, u32 len)
 
 	error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
 	if (error)
-		debug("tegra20_i2c_read_data: Error (%d) !!!\n", error);
+		debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
 
 	return error;
 }
@@ -438,7 +438,7 @@ int i2c_write_data(uchar chip, uchar *buffer, int len)
 	debug("\n");
 
 	/* Shift 7-bit address over for lower-level i2c functions */
-	rc = tegra20_i2c_write_data(chip << 1, buffer, len);
+	rc = tegra_i2c_write_data(chip << 1, buffer, len);
 	if (rc)
 		debug("i2c_write_data(): rc=%d\n", rc);
 
@@ -452,7 +452,7 @@ int i2c_read_data(uchar chip, uchar *buffer, int len)
 
 	debug("inside i2c_read_data():\n");
 	/* Shift 7-bit address over for lower-level i2c functions */
-	rc = tegra20_i2c_read_data(chip << 1, buffer, len);
+	rc = tegra_i2c_read_data(chip << 1, buffer, len);
 	if (rc) {
 		debug("i2c_read_data(): rc=%d\n", rc);
 		return rc;

drivers/input/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	:= $(obj)libinput.o
 
 COBJS-$(CONFIG_I8042_KBD) += i8042.o
-COBJS-$(CONFIG_TEGRA20_KEYBOARD) += tegra-kbc.o
+COBJS-$(CONFIG_TEGRA_KEYBOARD) += tegra-kbc.o
 ifdef CONFIG_PS2KBD
 COBJS-y += keyboard.o pc_keyb.o
 COBJS-$(CONFIG_PS2MULT) += ps2mult.o ps2ser.o

drivers/mmc/tegra_mmc.c

@@ -25,7 +25,7 @@
 #include <asm/io.h>
 #include <asm/arch/clk_rst.h>
 #include <asm/arch/clock.h>
-#include "tegra_mmc.h"
+#include <asm/arch/tegra_mmc.h>
 
 /* support 4 mmc hosts */
 struct mmc mmc_dev[4];
@@ -39,31 +39,31 @@ struct mmc_host mmc_host[4];
  * @param host		Structure to fill in (base, reg, mmc_id)
  * @param dev_index	Device index (0-3)
  */
-static void tegra20_get_setup(struct mmc_host *host, int dev_index)
+static void tegra_get_setup(struct mmc_host *host, int dev_index)
 {
-	debug("tegra20_get_base_mmc: dev_index = %d\n", dev_index);
+	debug("tegra_get_setup: dev_index = %d\n", dev_index);
 
 	switch (dev_index) {
 	case 1:
-		host->base = TEGRA20_SDMMC3_BASE;
+		host->base = TEGRA_SDMMC3_BASE;
 		host->mmc_id = PERIPH_ID_SDMMC3;
 		break;
 	case 2:
-		host->base = TEGRA20_SDMMC2_BASE;
+		host->base = TEGRA_SDMMC2_BASE;
 		host->mmc_id = PERIPH_ID_SDMMC2;
 		break;
 	case 3:
-		host->base = TEGRA20_SDMMC1_BASE;
+		host->base = TEGRA_SDMMC1_BASE;
 		host->mmc_id = PERIPH_ID_SDMMC1;
 		break;
 	case 0:
 	default:
-		host->base = TEGRA20_SDMMC4_BASE;
+		host->base = TEGRA_SDMMC4_BASE;
 		host->mmc_id = PERIPH_ID_SDMMC4;
 		break;
 	}
 
-	host->reg = (struct tegra20_mmc *)host->base;
+	host->reg = (struct tegra_mmc *)host->base;
 }
 
 static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
@@ -345,7 +345,7 @@ static void mmc_change_clock(struct mmc_host *host, uint clock)
 	debug(" mmc_change_clock called\n");
 
 	/*
-	 * Change Tegra20 SDMMCx clock divisor here. Source is 216MHz,
+	 * Change Tegra SDMMCx clock divisor here. Source is 216MHz,
 	 * PLLP_OUT0
 	 */
 	if (clock == 0)
@@ -494,11 +494,11 @@ static int mmc_core_init(struct mmc *mmc)
 	return 0;
 }
 
-int tegra20_mmc_getcd(struct mmc *mmc)
+int tegra_mmc_getcd(struct mmc *mmc)
 {
 	struct mmc_host *host = (struct mmc_host *)mmc->priv;
 
-	debug("tegra20_mmc_getcd called\n");
+	debug("tegra_mmc_getcd called\n");
 
 	if (host->cd_gpio >= 0)
 		return !gpio_get_value(host->cd_gpio);
@@ -506,13 +506,13 @@ int tegra20_mmc_getcd(struct mmc *mmc)
 	return 1;
 }
 
-int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
+int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
 {
 	struct mmc_host *host;
 	char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */
 	struct mmc *mmc;
 
-	debug(" tegra20_mmc_init: index %d, bus width %d "
+	debug(" tegra_mmc_init: index %d, bus width %d "
 		"pwr_gpio %d cd_gpio %d\n",
 		dev_index, bus_width, pwr_gpio, cd_gpio);
 
@@ -521,7 +521,7 @@ int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
 	host->clock = 0;
 	host->pwr_gpio = pwr_gpio;
 	host->cd_gpio = cd_gpio;
-	tegra20_get_setup(host, dev_index);
+	tegra_get_setup(host, dev_index);
 
 	clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
 
@@ -539,12 +539,12 @@ int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
 
 	mmc = &mmc_dev[dev_index];
 
-	sprintf(mmc->name, "Tegra20 SD/MMC");
+	sprintf(mmc->name, "Tegra SD/MMC");
 	mmc->priv = host;
 	mmc->send_cmd = mmc_send_cmd;
 	mmc->set_ios = mmc_set_ios;
 	mmc->init = mmc_core_init;
-	mmc->getcd = tegra20_mmc_getcd;
+	mmc->getcd = tegra_mmc_getcd;
 
 	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
 	if (bus_width == 8)
@@ -559,7 +559,7 @@ int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
 	 * max freq is highest HS eMMC clock as per the SD/MMC spec
 	 *  (actually 52MHz)
 	 * Both of these are the closest equivalents w/216MHz source
-	 *  clock and Tegra20 SDMMC divisors.
+	 *  clock and Tegra SDMMC divisors.
 	 */
 	mmc->f_min = 375000;
 	mmc->f_max = 48000000;

drivers/spi/tegra_spi.c

@@ -72,9 +72,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 		return NULL;
 	}
 
-	if (max_hz > TEGRA20_SPI_MAX_FREQ) {
+	if (max_hz > TEGRA_SPI_MAX_FREQ) {
 		printf("SPI error: unsupported frequency %d Hz. Max frequency"
-			" is %d Hz\n", max_hz, TEGRA20_SPI_MAX_FREQ);
+			" is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ);
 		return NULL;
 	}
 
@@ -86,7 +86,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 	spi->slave.bus = bus;
 	spi->slave.cs = cs;
 	spi->freq = max_hz;
-	spi->regs = (struct spi_tegra *)TEGRA20_SPI_BASE;
+	spi->regs = (struct spi_tegra *)NV_PA_SPI_BASE;
 	spi->mode = mode;
 
 	return &spi->slave;

include/configs/harmony.h

@@ -34,15 +34,15 @@
 
 /* High-level configuration options */
 #define V_PROMPT		"Tegra20 (Harmony) # "
-#define CONFIG_TEGRA20_BOARD_STRING	"NVIDIA Harmony"
+#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Harmony"
 
 /* Board-specific serial config */
 #define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD
+#define CONFIG_TEGRA_ENABLE_UARTD
 
 /* UARTD: keyboard satellite board UART, default */
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
-#ifdef CONFIG_TEGRA20_ENABLE_UARTA
+#ifdef CONFIG_TEGRA_ENABLE_UARTA
 /* UARTA: debug board UART */
 #define CONFIG_SYS_NS16550_COM2		NV_PA_APB_UARTA_BASE
 #endif
@@ -66,7 +66,7 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_TEGRA_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE	TEGRA20_NAND_BASE
+#define CONFIG_SYS_NAND_BASE	NV_PA_NAND_BASE
 
 /* Environment in NAND (which is 512M), aligned to start of last sector */
 #define CONFIG_ENV_IS_IN_NAND
@@ -87,6 +87,6 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */

include/configs/medcom.h

@@ -35,11 +35,11 @@
 
 /* High-level configuration options */
 #define V_PROMPT			"Tegra20 (Medcom) # "
-#define CONFIG_TEGRA20_BOARD_STRING	"Avionic Design Medcom"
+#define CONFIG_TEGRA_BOARD_STRING	"Avionic Design Medcom"
 
 /* Board-specific serial config */
 #define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD	/* UARTD: debug UART */
+#define CONFIG_TEGRA_ENABLE_UARTD	/* UARTD: debug UART */
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
 
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -78,6 +78,6 @@
 	"ext2load mmc 0 0x17000000 /boot/uImage;"	\
 	"bootm"
 
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */

include/configs/paz00.h

@@ -27,11 +27,11 @@
 
 /* High-level configuration options */
 #define V_PROMPT		"Tegra20 (Paz00) MOD # "
-#define CONFIG_TEGRA20_BOARD_STRING	"Compal Paz00"
+#define CONFIG_TEGRA_BOARD_STRING	"Compal Paz00"
 
 /* Board-specific serial config */
 #define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTA
+#define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_PAZ00
@@ -69,6 +69,6 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */

include/configs/plutux.h

@@ -35,11 +35,11 @@
 
 /* High-level configuration options */
 #define V_PROMPT			"Tegra20 (Plutux) # "
-#define CONFIG_TEGRA20_BOARD_STRING	"Avionic Design Plutux"
+#define CONFIG_TEGRA_BOARD_STRING	"Avionic Design Plutux"
 
 /* Board-specific serial config */
 #define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD	/* UARTD: debug UART */
+#define CONFIG_TEGRA_ENABLE_UARTD	/* UARTD: debug UART */
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
 
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -78,6 +78,6 @@
 	"ext2load mmc 0 0x17000000 /boot/uImage;"	\
 	"bootm"
 
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */

include/configs/seaboard.h

@@ -27,7 +27,7 @@
 #include <asm/sizes.h>
 
 /* LP0 suspend / resume */
-#define CONFIG_TEGRA20_LP0
+#define CONFIG_TEGRA_LP0
 #define CONFIG_AES
 #define CONFIG_TEGRA_PMU
 #define CONFIG_TPS6586X_POWER
@@ -42,11 +42,11 @@
 
 /* High-level configuration options */
 #define V_PROMPT		"Tegra20 (SeaBoard) # "
-#define CONFIG_TEGRA20_BOARD_STRING	"NVIDIA Seaboard"
+#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Seaboard"
 
 /* Board-specific serial config */
 #define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD
+#define CONFIG_TEGRA_ENABLE_UARTD
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
 
 /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
@@ -96,15 +96,15 @@
 #define CONFIG_CMD_DHCP
 
 /* Enable keyboard */
-#define CONFIG_TEGRA20_KEYBOARD
+#define CONFIG_TEGRA_KEYBOARD
 #define CONFIG_KEYBOARD
 
-#undef TEGRA20_DEVICE_SETTINGS
-#define TEGRA20_DEVICE_SETTINGS	"stdin=serial,tegra-kbc\0" \
-					"stdout=serial\0" \
-					"stderr=serial\0"
+#undef TEGRA_DEVICE_SETTINGS
+#define TEGRA_DEVICE_SETTINGS	"stdin=serial,tegra-kbc\0" \
+				"stdout=serial\0" \
+				"stderr=serial\0"
 
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
 
 /* NAND support */
 #define CONFIG_CMD_NAND
@@ -114,5 +114,5 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
 /* Somewhat oddly, the NAND base address must be a config option */
-#define CONFIG_SYS_NAND_BASE	TEGRA20_NAND_BASE
+#define CONFIG_SYS_NAND_BASE	NV_PA_NAND_BASE
 #endif /* __CONFIG_H */

include/configs/tec.h

@@ -35,12 +35,12 @@
 
 /* High-level configuration options */
 #define V_PROMPT			"Tegra20 (TEC) # "
-#define CONFIG_TEGRA20_BOARD_STRING	"Avionic Design Tamonten Evaluation Carrier"
+#define CONFIG_TEGRA_BOARD_STRING	"Avionic Design Tamonten Evaluation Carrier"
 #define CONFIG_SYS_BOARD_ODMDATA	0x2b0d8011
 
 /* Board-specific serial config */
 #define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD	/* UARTD: debug UART */
+#define CONFIG_TEGRA_ENABLE_UARTD	/* UARTD: debug UART */
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
 
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -55,7 +55,7 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_TEGRA_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		TEGRA20_NAND_BASE
+#define CONFIG_SYS_NAND_BASE		NV_PA_NAND_BASE
 
 /* Environment in NAND, aligned to start of last sector */
 #define CONFIG_ENV_IS_IN_NAND
@@ -87,6 +87,6 @@
 	"ext2load mmc 0 0x17000000 /boot/uImage;"	\
 	"bootm"
 
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */

include/configs/tegra-common-post.h

@@ -21,8 +21,8 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __TEGRA20_COMMON_POST_H
-#define __TEGRA20_COMMON_POST_H
+#ifndef __TEGRA_COMMON_POST_H
+#define __TEGRA_COMMON_POST_H
 
 #ifdef CONFIG_BOOTCOMMAND
 
@@ -141,7 +141,7 @@
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	TEGRA20_DEVICE_SETTINGS \
+	TEGRA_DEVICE_SETTINGS \
 	"fdt_load=0x01000000\0" \
 	"fdt_high=01100000\0" \
 	BOOTCMDS_COMMON
@@ -174,8 +174,8 @@
 #ifdef CONFIG_GENERIC_MMC
 #undef CONFIG_GENERIC_MMC
 #endif
-#ifdef CONFIG_TEGRA20_MMC
-#undef CONFIG_TEGRA20_MMC
+#ifdef CONFIG_TEGRA_MMC
+#undef CONFIG_TEGRA_MMC
 #endif
 #ifdef CONFIG_CMD_MMC
 #undef CONFIG_CMD_MMC
@@ -211,4 +211,4 @@
 
 #endif /* CONFIG_SPL_BUILD */
 
-#endif /* __TEGRA20_COMMON_POST_H */
+#endif /* __TEGRA_COMMON_POST_H */

include/configs/tegra20-common.h

@@ -54,7 +54,7 @@
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_OF_LIBFDT		/* enable passing of devicetree */
 
-#ifdef CONFIG_TEGRA20_LP0
+#ifdef CONFIG_TEGRA_LP0
 #define TEGRA_LP0_ADDR			0x1C406000
 #define TEGRA_LP0_SIZE			0x2000
 #define TEGRA_LP0_VEC \
@@ -132,9 +132,9 @@
 /* Environment information, boards can override if required */
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define TEGRA20_DEVICE_SETTINGS	"stdin=serial\0" \
-					"stdout=serial\0" \
-					"stderr=serial\0"
+#define TEGRA_DEVICE_SETTINGS	"stdin=serial\0" \
+				"stdout=serial\0" \
+				"stderr=serial\0"
 
 #define CONFIG_LOADADDR		0x408000	/* def. location for kernel */
 #define CONFIG_BOOTDELAY	2		/* -1 to disable auto boot */
@@ -157,7 +157,7 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
 
-#define CONFIG_SYS_MEMTEST_START	(TEGRA20_SDRC_CS0 + 0x600000)
+#define CONFIG_SYS_MEMTEST_START	(NV_PA_SDRC_CS0 + 0x600000)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
 
 #define CONFIG_SYS_LOAD_ADDR		(0xA00800)	/* default */
@@ -169,7 +169,7 @@
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		TEGRA20_SDRC_CS0
+#define PHYS_SDRAM_1		NV_PA_SDRC_CS0
 #define PHYS_SDRAM_1_SIZE	0x20000000	/* 512M */
 
 #define CONFIG_SYS_TEXT_BASE	0x0010c000

include/configs/trimslice.h

@@ -34,12 +34,12 @@
 
 /* High-level configuration options */
 #define V_PROMPT		"Tegra20 (TrimSlice) # "
-#define CONFIG_TEGRA20_BOARD_STRING	"Compulab Trimslice"
+#define CONFIG_TEGRA_BOARD_STRING	"Compulab Trimslice"
 
 /* Board-specific serial config */
 #define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTA
-#define CONFIG_TEGRA20_UARTA_GPU
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_GPU
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_TRIMSLICE
@@ -94,6 +94,6 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */

include/configs/ventana.h

@@ -34,11 +34,11 @@
 
 /* High-level configuration options */
 #define V_PROMPT		"Tegra20 (Ventana) # "
-#define CONFIG_TEGRA20_BOARD_STRING	"NVIDIA Ventana"
+#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Ventana"
 
 /* Board-specific serial config */
 #define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD
+#define CONFIG_TEGRA_ENABLE_UARTD
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_VENTANA
@@ -76,6 +76,6 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */

include/configs/whistler.h

@@ -34,12 +34,12 @@
 
 /* High-level configuration options */
 #define V_PROMPT		"Tegra20 (Whistler) # "
-#define CONFIG_TEGRA20_BOARD_STRING	"NVIDIA Whistler"
+#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Whistler"
 
 /* Board-specific serial config */
 #define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTA
-#define CONFIG_TEGRA20_UARTA_UAA_UAB
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_UAA_UAB
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_WHISTLER
@@ -90,6 +90,6 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */