mmc: sdhci: use the generic error number

Use the generic error number instead of meaningless value.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
master
Jaehoon Chung 8 years ago
parent 895549a2d9
commit 2cb5d67c1a
  1. 2
      drivers/mmc/bcm2835_sdhci.c
  2. 2
      drivers/mmc/ftsdc021_sdhci.c
  3. 6
      drivers/mmc/kona_sdhci.c
  4. 2
      drivers/mmc/mv_sdhci.c
  5. 8
      drivers/mmc/s5p_sdhci.c
  6. 12
      drivers/mmc/sdhci.c

@ -157,7 +157,7 @@ int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq)
bcm_host = calloc(1, sizeof(*bcm_host));
if (!bcm_host) {
printf("sdhci_host calloc fail!\n");
return 1;
return -ENOMEM;
}
/*

@ -21,7 +21,7 @@ int ftsdc021_sdhci_init(u32 regbase)
host = calloc(1, sizeof(struct sdhci_host));
if (!host) {
puts("sdh_host malloc fail!\n");
return 1;
return -ENOMEM;
}
host->name = "FTSDC021";

@ -27,7 +27,7 @@ static int init_kona_mmc_core(struct sdhci_host *host)
if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & SDHCI_RESET_ALL) {
printf("%s: sd host controller reset error\n", __func__);
return 1;
return -EBUSY;
}
/* For kona a hardware reset before anything else. */
@ -39,7 +39,7 @@ static int init_kona_mmc_core(struct sdhci_host *host)
do {
if (timeout == 0) {
printf("%s: reset timeout error\n", __func__);
return 1;
return -ETIMEDOUT;
}
timeout--;
udelay(100);
@ -67,7 +67,7 @@ static int init_kona_mmc_core(struct sdhci_host *host)
while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
if (timeout == 0) {
printf("%s: CARD DETECT timeout error\n", __func__);
return 1;
return -ETIMEDOUT;
}
timeout--;
udelay(100);

@ -71,7 +71,7 @@ int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks)
host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
if (!host) {
printf("sdh_host malloc fail!\n");
return 1;
return -ENOMEM;
}
host->name = MVSDH_NAME;

@ -100,7 +100,7 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width)
struct sdhci_host *host = calloc(1, sizeof(struct sdhci_host));
if (!host) {
printf("sdhci__host allocation fail!\n");
return 1;
return -ENOMEM;
}
host->ioaddr = (void *)regbase;
host->index = index;
@ -154,7 +154,7 @@ static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host)
dev_id = pinmux_decode_periph_id(blob, node);
if (dev_id < PERIPH_ID_SDMMC0 && dev_id > PERIPH_ID_SDMMC3) {
debug("MMC: Can't get device id\n");
return -1;
return -EINVAL;
}
host->index = dev_id - PERIPH_ID_SDMMC0;
@ -162,7 +162,7 @@ static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host)
bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
if (bus_width <= 0) {
debug("MMC: Can't get bus-width\n");
return -1;
return -EINVAL;
}
host->bus_width = bus_width;
@ -170,7 +170,7 @@ static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host)
base = fdtdec_get_addr(blob, node, "reg");
if (!base) {
debug("MMC: Can't get base address\n");
return -1;
return -EINVAL;
}
host->ioaddr = (void *)base;

@ -87,7 +87,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data,
if (stat & SDHCI_INT_ERROR) {
printf("%s: Error detected in status(0x%X)!\n",
__func__, stat);
return -1;
return -EIO;
}
if (stat & rdy) {
if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & mask))
@ -110,7 +110,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data,
udelay(10);
else {
printf("%s: Transfer data timeout\n", __func__);
return -1;
return -ETIMEDOUT;
}
} while (!(stat & SDHCI_INT_DATA_END));
return 0;
@ -303,7 +303,7 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
if (timeout == 0) {
printf("%s: Timeout to wait cmd & data inhibit\n",
__func__);
return -1;
return -EBUSY;
}
timeout--;
@ -374,7 +374,7 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
if (timeout == 0) {
printf("%s: Internal clock never stabilised.\n",
__func__);
return -1;
return -EBUSY;
}
timeout--;
udelay(1000);
@ -477,7 +477,7 @@ static int sdhci_init(struct mmc *mmc)
if (!aligned_buffer) {
printf("%s: Aligned buffer alloc failed!!!\n",
__func__);
return -1;
return -ENOMEM;
}
}
@ -631,7 +631,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
host->mmc = mmc_create(&host->cfg, host);
if (host->mmc == NULL) {
printf("%s: mmc create fail!\n", __func__);
return -1;
return -ENOMEM;
}
return 0;

Loading…
Cancel
Save