Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

status_led: Kconfig migration

Browse Source 
Move all of the status LED feature to drivers/led/Kconfig.
The LED status definitions were moved from the board configuration
files to the defconfig files.

TBD: Move all of the definitions in the include/status_led.h to the
relevant board's defconfig files.

Tested boards: CL-SOM-AM57x, CM-T335

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
master
Uri Mashiach 7 years ago committed by Tom Rini
parent 79267edd10
commit 2d8d190c83
89 changed files with 486 additions and 454 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 35
      arch/arm/cpu/arm920t/ep93xx/led.c
  2. 10
      arch/powerpc/include/asm/status_led.h
  3. 6
      arch/powerpc/lib/interrupts.c
  4. 2
      board/BuS/eb_cpu5282/eb_cpu5282.c
  5. 28
      board/bf533-stamp/bf533-stamp.c
  6. 4
      board/compulab/cm_t335/cm_t335.c
  7. 4
      board/compulab/cm_t35/cm_t35.c
  8. 4
      board/compulab/cm_t3517/cm_t3517.c
  9. 26
      board/corscience/tricorder/led.c
  10. 6
      board/corscience/tricorder/tricorder.c
  11. 4
      board/isee/igep00x0/igep00x0.c
  12. 45
      board/motionpro/motionpro.c
  13. 6
      board/olimex/mx23_olinuxino/mx23_olinuxino.c
  14. 4
      board/samtec/vining_fpga/socfpga.c
  15. 2
      board/ti/beagle/Makefile
  16. 6
      board/ti/beagle/beagle.c
  17. 14
      board/ti/beagle/led.c
  18. 2
      cmd/Makefile
  19. 2
      cmd/ide.c
  20. 69
      cmd/led.c
  21. 8
      common/board_r.c
  22. 7
      configs/TQM823L_defconfig
  23. 7
      configs/TQM823M_defconfig
  24. 7
      configs/TQM850L_defconfig
  25. 7
      configs/TQM850M_defconfig
  26. 7
      configs/TQM855L_defconfig
  27. 7
      configs/TQM855M_defconfig
  28. 7
      configs/TQM860L_defconfig
  29. 7
      configs/TQM860M_defconfig
  30. 7
      configs/TQM862L_defconfig
  31. 7
      configs/TQM862M_defconfig
  32. 7
      configs/TQM866M_defconfig
  33. 7
      configs/TQM885D_defconfig
  34. 5
      configs/cl-som-am57x_defconfig
  35. 6
      configs/cm_t335_defconfig
  36. 7
      configs/cm_t3517_defconfig
  37. 7
      configs/cm_t35_defconfig
  38. 6
      configs/eb_cpu5282_defconfig
  39. 6
      configs/eb_cpu5282_internal_defconfig
  40. 12
      configs/edb9315a_defconfig
  41. 7
      configs/igep0020_defconfig
  42. 7
      configs/igep0030_defconfig
  43. 10
      configs/motionpro_defconfig
  44. 8
      configs/mx23_olinuxino_defconfig
  45. 12
      configs/omap3_beagle_defconfig
  46. 11
      configs/socfpga_vining_fpga_defconfig
  47. 20
      configs/tqma6s_wru4_mmc_defconfig
  48. 11
      configs/tricorder_defconfig
  49. 11
      configs/tricorder_flash_defconfig
  50. 6
      configs/v38b_defconfig
  51. 4
      drivers/misc/Makefile
  52. 26
      drivers/misc/gpio_led.c
  53. 2
      drivers/misc/pca9551_led.c
  54. 76
      drivers/misc/status_led.c
  55. 2
      include/common.h
  56. 2
      include/configs/PATI.h
  57. 6
      include/configs/TQM823L.h
  58. 6
      include/configs/TQM823M.h
  59. 2
      include/configs/TQM850L.h
  60. 2
      include/configs/TQM850M.h
  61. 2
      include/configs/TQM855L.h
  62. 2
      include/configs/TQM855M.h
  63. 2
      include/configs/TQM860L.h
  64. 2
      include/configs/TQM860M.h
  65. 2
      include/configs/TQM862L.h
  66. 2
      include/configs/TQM862M.h
  67. 2
      include/configs/TQM866M.h
  68. 2
      include/configs/TQM885D.h
  69. 16
      include/configs/bf526-ezbrd.h
  70. 16
      include/configs/bf533-stamp.h
  71. 11
      include/configs/cl-som-am57x.h
  72. 7
      include/configs/cm_t335.h
  73. 10
      include/configs/cm_t35.h
  74. 10
      include/configs/cm_t3517.h
  75. 7
      include/configs/eb_cpu5282.h
  76. 13
      include/configs/edb93xx.h
  77. 14
      include/configs/motionpro.h
  78. 9
      include/configs/mx23_olinuxino.h
  79. 11
      include/configs/omap3_beagle.h
  80. 8
      include/configs/omap3_igep00x0.h
  81. 16
      include/configs/socfpga_vining_fpga.h
  82. 1
      include/configs/stm32f429-discovery.h
  83. 21
      include/configs/tqma6_wru4.h
  84. 12
      include/configs/tricorder.h
  85. 2
      include/configs/v38b.h
  86. 59
      include/status_led.h
  87. 6
      net/bootp.c
  88. 20
      net/net.c
  89. 4
      scripts/config_whitelist.txt

35
arch/arm/cpu/arm920t/ep93xx/led.c
Unescape View File

@ -9,16 +9,16 @@
#include <config.h>
#include <status_led.h>
static uint8_t saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
static uint32_t gpio_pin[2] = {1 << STATUS_LED_GREEN,
1 << STATUS_LED_RED};
static uint8_t saved_state[2] = {CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_OFF};
static uint32_t gpio_pin[2] = {1 << CONFIG_LED_STATUS_GREEN,
1 << CONFIG_LED_STATUS_RED};
static inline void switch_LED_on(uint8_t led)
{
register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
writel(readl(&gpio->pedr) | gpio_pin[led], &gpio->pedr);
saved_state[led] = STATUS_LED_ON;
saved_state[led] = CONFIG_LED_STATUS_ON;
}
static inline void switch_LED_off(uint8_t led)
@ -26,27 +26,27 @@ static inline void switch_LED_off(uint8_t led)
register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
writel(readl(&gpio->pedr) & ~gpio_pin[led], &gpio->pedr);
saved_state[led] = STATUS_LED_OFF;
saved_state[led] = CONFIG_LED_STATUS_OFF;
}
void red_led_on(void)
{
switch_LED_on(STATUS_LED_RED);
switch_LED_on(CONFIG_LED_STATUS_RED);
}
void red_led_off(void)
{
switch_LED_off(STATUS_LED_RED);
switch_LED_off(CONFIG_LED_STATUS_RED);
}
void green_led_on(void)
{
switch_LED_on(STATUS_LED_GREEN);
switch_LED_on(CONFIG_LED_STATUS_GREEN);
}
void green_led_off(void)
{
switch_LED_off(STATUS_LED_GREEN);
switch_LED_off(CONFIG_LED_STATUS_GREEN);
}
void __led_init(led_id_t mask, int state)
@ -56,13 +56,14 @@ void __led_init(led_id_t mask, int state)
void __led_toggle(led_id_t mask)
{
if (STATUS_LED_RED == mask) {
if (STATUS_LED_ON == saved_state[STATUS_LED_RED])
if (CONFIG_LED_STATUS_RED == mask) {
if (CONFIG_LED_STATUS_ON == saved_state[CONFIG_LED_STATUS_RED])
red_led_off();
else
red_led_on();
} else if (STATUS_LED_GREEN == mask) {
if (STATUS_LED_ON == saved_state[STATUS_LED_GREEN])
} else if (CONFIG_LED_STATUS_GREEN == mask) {
if (CONFIG_LED_STATUS_ON ==
saved_state[CONFIG_LED_STATUS_GREEN])
green_led_off();
else
green_led_on();
@ -71,13 +72,13 @@ void __led_toggle(led_id_t mask)
void __led_set(led_id_t mask, int state)
{
if (STATUS_LED_RED == mask) {
if (STATUS_LED_ON == state)
if (CONFIG_LED_STATUS_RED == mask) {
if (CONFIG_LED_STATUS_ON == state)
red_led_on();
else
red_led_off();
} else if (STATUS_LED_GREEN == mask) {
if (STATUS_LED_ON == state)
} else if (CONFIG_LED_STATUS_GREEN == mask) {
if (CONFIG_LED_STATUS_ON == state)
green_led_on();
else
green_led_off();

10
arch/powerpc/include/asm/status_led.h
Unescape View File

@ -8,7 +8,7 @@
#define __ASM_STATUS_LED_H__
/* if not overridden */
#ifndef CONFIG_BOARD_SPECIFIC_LED
#ifndef CONFIG_LED_STATUS_BOARD_SPECIFIC
# if defined(CONFIG_8xx)
# include <mpc8xx.h>
# elif defined(CONFIG_MPC8260)
@ -34,12 +34,12 @@ static inline void __led_init (led_id_t mask, int state)
#endif
#if (STATUS_LED_ACTIVE == 0)
if (state == STATUS_LED_ON)
if (state == CONFIG_LED_STATUS_ON)
immr->STATUS_LED_DAT &= ~mask;
else
immr->STATUS_LED_DAT |= mask;
#else
if (state == STATUS_LED_ON)
if (state == CONFIG_LED_STATUS_ON)
immr->STATUS_LED_DAT |= mask;
else
immr->STATUS_LED_DAT &= ~mask;
@ -59,12 +59,12 @@ static inline void __led_set (led_id_t mask, int state)
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
#if (STATUS_LED_ACTIVE == 0)
if (state == STATUS_LED_ON)
if (state == CONFIG_LED_STATUS_ON)
immr->STATUS_LED_DAT &= ~mask;
else
immr->STATUS_LED_DAT |= mask;
#else
if (state == STATUS_LED_ON)
if (state == CONFIG_LED_STATUS_ON)
immr->STATUS_LED_DAT |= mask;
else
immr->STATUS_LED_DAT &= ~mask;

6
arch/powerpc/lib/interrupts.c
Unescape View File

@ -11,7 +11,7 @@
#include <common.h>
#include <asm/processor.h>
#include <watchdog.h>
#ifdef CONFIG_STATUS_LED
#ifdef CONFIG_LED_STATUS
#include <status_led.h>
#endif
@ -112,9 +112,9 @@ void timer_interrupt (struct pt_regs *regs)
WATCHDOG_RESET ();
#endif /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
#ifdef CONFIG_STATUS_LED
#ifdef CONFIG_LED_STATUS
status_led_tick (timestamp);
#endif /* CONFIG_STATUS_LED */
#endif /* CONFIG_LED_STATUS */
#ifdef CONFIG_SHOW_ACTIVITY
board_show_activity (timestamp);

2
board/BuS/eb_cpu5282/eb_cpu5282.c
Unescape View File

@ -174,7 +174,7 @@ void __led_init(led_id_t mask, int state)
void __led_set(led_id_t mask, int state)
{
if (state == STATUS_LED_ON)
if (state == CONFIG_LED_STATUS_ON)
MCFGPTA_GPTPORT |= (1 << 3);
else
MCFGPTA_GPTPORT &= ~(1 << 3);

28
board/bf533-stamp/bf533-stamp.c
Unescape View File

@ -50,8 +50,8 @@ int misc_init_r(void)
#ifdef CONFIG_SHOW_BOOT_PROGRESS
#define STATUS_LED_OFF 0
#define STATUS_LED_ON 1
#define CONFIG_LED_STATUS_OFF 0
#define CONFIG_LED_STATUS_ON 1
static int gpio_setup;
@ -76,24 +76,30 @@ void show_boot_progress(int status)
{
switch (status) {
case BOOTSTAGE_ID_CHECK_MAGIC:
stamp_led_set(STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON);
stamp_led_set(CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_OFF,
CONFIG_LED_STATUS_ON);
break;
case BOOTSTAGE_ID_CHECK_HEADER:
stamp_led_set(STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF);
stamp_led_set(CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_ON,
CONFIG_LED_STATUS_OFF);
break;
case BOOTSTAGE_ID_CHECK_CHECKSUM:
stamp_led_set(STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON);
stamp_led_set(CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_ON,
CONFIG_LED_STATUS_ON);
break;
case BOOTSTAGE_ID_CHECK_ARCH:
stamp_led_set(STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF);
stamp_led_set(CONFIG_LED_STATUS_ON, CONFIG_LED_STATUS_OFF,
CONFIG_LED_STATUS_OFF);
break;
case BOOTSTAGE_ID_CHECK_IMAGETYPE:
case BOOTSTAGE_ID_DECOMP_IMAGE:
stamp_led_set(STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON);
stamp_led_set(CONFIG_LED_STATUS_ON, CONFIG_LED_STATUS_OFF,
CONFIG_LED_STATUS_ON);
break;
case BOOTSTAGE_ID_KERNEL_LOADED:
case BOOTSTAGE_ID_CHECK_BOOT_OS:
stamp_led_set(STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF);
stamp_led_set(CONFIG_LED_STATUS_ON, CONFIG_LED_STATUS_ON,
CONFIG_LED_STATUS_OFF);
break;
case BOOTSTAGE_ID_BOOT_OS_RETURNED:
case BOOTSTAGE_ID_RD_MAGIC:
@ -102,10 +108,12 @@ void show_boot_progress(int status)
case BOOTSTAGE_ID_RAMDISK:
case BOOTSTAGE_ID_NO_RAMDISK:
case BOOTSTAGE_ID_RUN_OS:
stamp_led_set(STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_OFF);
stamp_led_set(CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_OFF,
CONFIG_LED_STATUS_OFF);
break;
default:
stamp_led_set(STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON);
stamp_led_set(CONFIG_LED_STATUS_ON, CONFIG_LED_STATUS_ON,
CONFIG_LED_STATUS_ON);
break;
}
}

4
board/compulab/cm_t335/cm_t335.c
Unescape View File

@ -31,8 +31,8 @@ int board_init(void)
gpmc_init();
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_OFF);
#endif
return 0;
}

4
board/compulab/cm_t35/cm_t35.c
Unescape View File

@ -92,8 +92,8 @@ int board_init(void)
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
#endif
return 0;

4
board/compulab/cm_t3517/cm_t3517.c
Unescape View File

@ -89,8 +89,8 @@ int board_init(void)
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
#endif
cm_t3517_musb_init();

26
board/corscience/tricorder/led.c
Unescape View File

@ -23,16 +23,16 @@ void __led_init(led_id_t mask, int state)
void __led_toggle(led_id_t mask)
{
int toggle_gpio = 0;
#ifdef STATUS_LED_BIT
if (!toggle_gpio && STATUS_LED_BIT & mask)
#ifdef CONFIG_LED_STATUS0
if (!toggle_gpio && CONFIG_LED_STATUS_BIT & mask)
toggle_gpio = TRICORDER_STATUS_LED_GREEN;
#endif
#ifdef STATUS_LED_BIT1
if (!toggle_gpio && STATUS_LED_BIT1 & mask)
#ifdef CONFIG_LED_STATUS1
if (!toggle_gpio && CONFIG_LED_STATUS_BIT1 & mask)
toggle_gpio = TRICORDER_STATUS_LED_YELLOW;
#endif
#ifdef STATUS_LED_BIT2
if (!toggle_gpio && STATUS_LED_BIT2 & mask) {
#ifdef CONFIG_LED_STATUS2
if (!toggle_gpio && CONFIG_LED_STATUS_BIT2 & mask) {
uint8_t val;
twl4030_i2c_read_u8(TWL4030_CHIP_LED, TWL4030_LED_LEDEN,
&val);
@ -51,23 +51,23 @@ void __led_toggle(led_id_t mask)
void __led_set(led_id_t mask, int state)
{
#ifdef STATUS_LED_BIT
if (STATUS_LED_BIT & mask) {
#ifdef CONFIG_LED_STATUS0
if (CONFIG_LED_STATUS_BIT & mask) {
gpio_request(TRICORDER_STATUS_LED_GREEN, "");
gpio_direction_output(TRICORDER_STATUS_LED_GREEN, 0);
gpio_set_value(TRICORDER_STATUS_LED_GREEN, state);
}
#endif
#ifdef STATUS_LED_BIT1
if (STATUS_LED_BIT1 & mask) {
#ifdef CONFIG_LED_STATUS1
if (CONFIG_LED_STATUS_BIT1 & mask) {
gpio_request(TRICORDER_STATUS_LED_YELLOW, "");
gpio_direction_output(TRICORDER_STATUS_LED_YELLOW, 0);
gpio_set_value(TRICORDER_STATUS_LED_YELLOW, state);
}
#endif
#ifdef STATUS_LED_BIT2
if (STATUS_LED_BIT2 & mask) {
if (STATUS_LED_OFF == state)
#ifdef CONFIG_LED_STATUS2
if (CONFIG_LED_STATUS_BIT2 & mask) {
if (CONFIG_LED_STATUS_OFF == state)
twl4030_i2c_write_u8(TWL4030_CHIP_LED,
TWL4030_LED_LEDEN, 0);
else

6
board/corscience/tricorder/tricorder.c
Unescape View File

@ -120,9 +120,9 @@ int misc_init_r(void)
print_hwversion(&eeprom);
twl4030_power_init();
status_led_set(0, STATUS_LED_ON);
status_led_set(1, STATUS_LED_ON);
status_led_set(2, STATUS_LED_ON);
status_led_set(0, CONFIG_LED_STATUS_ON);
status_led_set(1, CONFIG_LED_STATUS_ON);
status_led_set(2, CONFIG_LED_STATUS_ON);
omap_die_id_display();

4
board/isee/igep00x0/igep00x0.c
Unescape View File

@ -69,8 +69,8 @@ int board_init(void)
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
#endif
return 0;

45
board/motionpro/motionpro.c
Unescape View File

@ -15,9 +15,9 @@
#include <miiphy.h>
#include <libfdt.h>
#if defined(CONFIG_STATUS_LED)
#if defined(CONFIG_LED_STATUS)
#include <status_led.h>
#endif /* CONFIG_STATUS_LED */
#endif /* CONFIG_LED_STATUS */
/* Kollmorgen DPR initialization data */
struct init_elem {
@ -194,27 +194,46 @@ int ft_board_setup(void *blob, bd_t *bd)
#endif /* CONFIG_OF_BOARD_SETUP */
#if defined(CONFIG_STATUS_LED)
void __led_init(led_id_t regaddr, int state)
#if defined(CONFIG_LED_STATUS)
vu_long *regcode_to_regaddr(led_id_t regcode)
{
*((vu_long *) regaddr) |= ENABLE_GPIO_OUT;
/* GPT Enable and Mode Select Register address */
vu_long *reg_translate[] = {
(vu_long *)MPC5XXX_GPT6_ENABLE,
(vu_long *)MPC5XXX_GPT7_ENABLE,
};
if (ARRAY_SIZE(reg_translate) <= regcode)
return NULL;
return reg_translate[regcode];
}
void __led_init(led_id_t regcode, int state)
{
vu_long *regaddr = regcode_to_regaddr(regcode);
*regaddr |= ENABLE_GPIO_OUT;
if (state == STATUS_LED_ON)
if (state == CONFIG_LED_STATUS_ON)
*((vu_long *) regaddr) |= LED_ON;
else
*((vu_long *) regaddr) &= ~LED_ON;
}
void __led_set(led_id_t regaddr, int state)
void __led_set(led_id_t regcode, int state)
{
if (state == STATUS_LED_ON)
*((vu_long *) regaddr) |= LED_ON;
vu_long *regaddr = regcode_to_regaddr(regcode);
if (state == CONFIG_LED_STATUS_ON)
*regaddr |= LED_ON;
else
*((vu_long *) regaddr) &= ~LED_ON;
*regaddr &= ~LED_ON;
}
void __led_toggle(led_id_t regaddr)
void __led_toggle(led_id_t regcode)
{
*((vu_long *) regaddr) ^= LED_ON;
vu_long *regaddr = regcode_to_regaddr(regcode);
*regaddr ^= LED_ON;
}
#endif /* CONFIG_STATUS_LED */
#endif /* CONFIG_LED_STATUS */

6
board/olimex/mx23_olinuxino/mx23_olinuxino.c
Unescape View File

@ -13,7 +13,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#ifdef CONFIG_STATUS_LED
#ifdef CONFIG_LED_STATUS
#include <status_led.h>
#endif
@ -72,8 +72,8 @@ int board_init(void)
/* Adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set(STATUS_LED_BOOT, STATUS_LED_STATE);
#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_STATE);
#endif
return 0;

4
board/samtec/vining_fpga/socfpga.c
Unescape View File

@ -21,8 +21,8 @@ int board_late_init(void)
const unsigned int usb_nrst_gpio = 35;
int ret;
status_led_set(1, STATUS_LED_ON);
status_led_set(2, STATUS_LED_ON);
status_led_set(1, CONFIG_LED_STATUS_ON);
status_led_set(2, CONFIG_LED_STATUS_ON);
/* Address of boot parameters for ATAG (if ATAG is used) */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;

2
board/ti/beagle/Makefile
Unescape View File

@ -6,4 +6,4 @@
#
obj-y := beagle.o
obj-$(CONFIG_STATUS_LED) += led.o
obj-$(CONFIG_LED_STATUS) += led.o

6
board/ti/beagle/beagle.c
Unescape View File

@ -16,7 +16,7 @@
#include <common.h>
#include <dm.h>
#include <ns16550.h>
#ifdef CONFIG_STATUS_LED
#ifdef CONFIG_LED_STATUS
#include <status_led.h>
#endif
#include <twl4030.h>
@ -96,8 +96,8 @@ int board_init(void)
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set (STATUS_LED_BOOT, STATUS_LED_ON);
#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
#endif
return 0;

14
board/ti/beagle/led.c
Unescape View File

@ -15,26 +15,26 @@
#define BEAGLE_LED_USR0 150
#define BEAGLE_LED_USR1 149
#ifdef STATUS_LED_GREEN
#ifdef CONFIG_LED_STATUS_GREEN
void green_led_off(void)
{
__led_set (STATUS_LED_GREEN, 0);
__led_set(CONFIG_LED_STATUS_GREEN, 0);
}
void green_led_on(void)
{
__led_set (STATUS_LED_GREEN, 1);
__led_set(CONFIG_LED_STATUS_GREEN, 1);
}
#endif
static int get_led_gpio(led_id_t mask)
{
#ifdef STATUS_LED_BIT
if (STATUS_LED_BIT & mask)
#ifdef CONFIG_LED_STATUS0
if (CONFIG_LED_STATUS_BIT & mask)
return BEAGLE_LED_USR0;
#endif
#ifdef STATUS_LED_BIT1
if (STATUS_LED_BIT1 & mask)
#ifdef CONFIG_LED_STATUS1
if (CONFIG_LED_STATUS_BIT1 & mask)
return BEAGLE_LED_USR1;
#endif

2
cmd/Makefile
Unescape View File

@ -78,7 +78,7 @@ obj-$(CONFIG_CMD_ITEST) += itest.o
obj-$(CONFIG_CMD_JFFS2) += jffs2.o
obj-$(CONFIG_CMD_CRAMFS) += cramfs.o
obj-$(CONFIG_CMD_LDRINFO) += ldrinfo.o
obj-$(CONFIG_CMD_LED) += led.o
obj-$(CONFIG_LED_STATUS_CMD) += led.o
obj-$(CONFIG_CMD_LICENSE) += license.o
obj-y += load.o
obj-$(CONFIG_LOGBUFFER) += log.o

2
cmd/ide.c
Unescape View File

@ -25,7 +25,7 @@
#include <ide.h>
#include <ata.h>
#ifdef CONFIG_STATUS_LED
#ifdef CONFIG_LED_STATUS
# include <status_led.h>
#endif

69
cmd/led.c
Unescape View File

@ -26,37 +26,38 @@ struct led_tbl_s {
typedef struct led_tbl_s led_tbl_t;
static const led_tbl_t led_commands[] = {
#ifdef CONFIG_BOARD_SPECIFIC_LED
#ifdef STATUS_LED_BIT
{ "0", STATUS_LED_BIT, NULL, NULL, NULL },
#ifdef CONFIG_LED_STATUS_BOARD_SPECIFIC
#ifdef CONFIG_LED_STATUS0
{ "0", CONFIG_LED_STATUS_BIT, NULL, NULL, NULL },
#endif
#ifdef STATUS_LED_BIT1
{ "1", STATUS_LED_BIT1, NULL, NULL, NULL },
#ifdef CONFIG_LED_STATUS1
{ "1", CONFIG_LED_STATUS_BIT1, NULL, NULL, NULL },
#endif
#ifdef STATUS_LED_BIT2
{ "2", STATUS_LED_BIT2, NULL, NULL, NULL },
#ifdef CONFIG_LED_STATUS2
{ "2", CONFIG_LED_STATUS_BIT2, NULL, NULL, NULL },
#endif
#ifdef STATUS_LED_BIT3
{ "3", STATUS_LED_BIT3, NULL, NULL, NULL },
#ifdef CONFIG_LED_STATUS3
{ "3", CONFIG_LED_STATUS_BIT3, NULL, NULL, NULL },
#endif
#ifdef STATUS_LED_BIT4
{ "4", STATUS_LED_BIT4, NULL, NULL, NULL },
#ifdef CONFIG_LED_STATUS4
{ "4", CONFIG_LED_STATUS_BIT4, NULL, NULL, NULL },
#endif
#ifdef STATUS_LED_BIT5
{ "5", STATUS_LED_BIT5, NULL, NULL, NULL },
#ifdef CONFIG_LED_STATUS5
{ "5", CONFIG_LED_STATUS_BIT5, NULL, NULL, NULL },
#endif
#endif
#ifdef STATUS_LED_GREEN
{ "green", STATUS_LED_GREEN, green_led_off, green_led_on, NULL },
#ifdef CONFIG_LED_STATUS_GREEN
{ "green", CONFIG_LED_STATUS_GREEN, green_led_off, green_led_on, NULL },
#endif
#ifdef STATUS_LED_YELLOW
{ "yellow", STATUS_LED_YELLOW, yellow_led_off, yellow_led_on, NULL },
#ifdef CONFIG_LED_STATUS_YELLOW
{ "yellow", CONFIG_LED_STATUS_YELLOW, yellow_led_off, yellow_led_on,
NULL },
#endif
#ifdef STATUS_LED_RED
{ "red", STATUS_LED_RED, red_led_off, red_led_on, NULL },
#ifdef CONFIG_LED_STATUS_RED
{ "red", CONFIG_LED_STATUS_RED, red_led_off, red_led_on, NULL },
#endif
#ifdef STATUS_LED_BLUE
{ "blue", STATUS_LED_BLUE, blue_led_off, blue_led_on, NULL },
#ifdef CONFIG_LED_STATUS_BLUE
{ "blue", CONFIG_LED_STATUS_BLUE, blue_led_off, blue_led_on, NULL },
#endif
{ NULL, 0, NULL, NULL, NULL }
};
@ -110,14 +111,14 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
led_commands[i].on();
else
__led_set(led_commands[i].mask,
STATUS_LED_ON);
CONFIG_LED_STATUS_ON);
break;
case LED_OFF:
if (led_commands[i].off)
led_commands[i].off();
else
__led_set(led_commands[i].mask,
STATUS_LED_OFF);
CONFIG_LED_STATUS_OFF);
break;
case LED_TOGGLE:
if (led_commands[i].toggle)
@ -149,36 +150,36 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(
led, 4, 1, do_led,
"["
#ifdef CONFIG_BOARD_SPECIFIC_LED
#ifdef STATUS_LED_BIT
#ifdef CONFIG_LED_STATUS_BOARD_SPECIFIC
#ifdef CONFIG_LED_STATUS0
"0|"
#endif
#ifdef STATUS_LED_BIT1
#ifdef CONFIG_LED_STATUS1
"1|"
#endif
#ifdef STATUS_LED_BIT2
#ifdef CONFIG_LED_STATUS2
"2|"
#endif
#ifdef STATUS_LED_BIT3
#ifdef CONFIG_LED_STATUS3
"3|"
#endif
#ifdef STATUS_LED_BIT4
#ifdef CONFIG_LED_STATUS4
"4|"
#endif
#ifdef STATUS_LED_BIT5
#ifdef CONFIG_LED_STATUS5
"5|"
#endif
#endif
#ifdef STATUS_LED_GREEN
#ifdef CONFIG_LED_STATUS_GREEN
"green|"
#endif
#ifdef STATUS_LED_YELLOW
#ifdef CONFIG_LED_STATUS_YELLOW
"yellow|"
#endif
#ifdef STATUS_LED_RED
#ifdef CONFIG_LED_STATUS_RED
"red|"
#endif
#ifdef STATUS_LED_BLUE
#ifdef CONFIG_LED_STATUS_BLUE
"blue|"
#endif
"all] [on|off|toggle|blink] [blink-freq in ms]",

8
common/board_r.c
Unescape View File

@ -596,11 +596,11 @@ static int initr_kgdb(void)
}
#endif
#if defined(CONFIG_STATUS_LED)
#if defined(CONFIG_LED_STATUS)
static int initr_status_led(void)
{
#if defined(STATUS_LED_BOOT)
status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
#if defined(CONFIG_LED_STATUS_BOOT)
status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_BLINKING);
#else
status_led_init();
#endif
@ -907,7 +907,7 @@ init_fnc_t init_sequence_r[] = {
#if defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32) || defined(CONFIG_M68K)
timer_init, /* initialize timer */
#endif
#if defined(CONFIG_STATUS_LED)
#if defined(CONFIG_LED_STATUS)
initr_status_led,
#endif
/* PPC has a udelay(20) here dating from 2002. Why? */

7
configs/TQM823L_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM823M_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM850L_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM850M_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM855L_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM855M_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM860L_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM860M_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM862L_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM862M_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM866M_defconfig
Unescape View File

@ -10,5 +10,12 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

7
configs/TQM885D_defconfig
Unescape View File

@ -13,5 +13,12 @@ CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

5
configs/cl-som-am57x_defconfig
Unescape View File

@ -23,6 +23,11 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=37
CONFIG_LED_STATUS_STATE=2
CONFIG_MMC_OMAP_HS=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y

6
configs/cm_t335_defconfig
Unescape View File

@ -35,6 +35,12 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=64
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y

7
configs/cm_t3517_defconfig
Unescape View File

@ -20,6 +20,13 @@ CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=186
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y

7
configs/cm_t35_defconfig
Unescape View File

@ -22,6 +22,13 @@ CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=186
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y

6
configs/eb_cpu5282_defconfig
Unescape View File

@ -12,4 +12,10 @@ CONFIG_CMD_I2C=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=8
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_LED_STATUS_CMD=y
# CONFIG_CFB_CONSOLE is not set

6
configs/eb_cpu5282_internal_defconfig
Unescape View File

@ -11,4 +11,10 @@ CONFIG_CMD_I2C=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=8
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_LED_STATUS_CMD=y
# CONFIG_CFB_CONSOLE is not set

12
configs/edb9315a_defconfig
Unescape View File

@ -15,5 +15,17 @@ CONFIG_CMD_DHCP=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=0
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS1=y
CONFIG_LED_STATUS_BIT1=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_LED_STATUS_RED_ENABLE=y
CONFIG_LED_STATUS_RED=1
CONFIG_LED_STATUS_GREEN_ENABLE=y
CONFIG_LED_STATUS_GREEN=0
CONFIG_USB=y
CONFIG_USB_STORAGE=y

7
configs/igep0020_defconfig
Unescape View File

@ -34,6 +34,13 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_UBI=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=27
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y

7
configs/igep0030_defconfig
Unescape View File

@ -26,6 +26,13 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_UBI=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=16
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y

10
configs/motionpro_defconfig
Unescape View File

@ -15,5 +15,15 @@ CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=0
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_FREQ=10
CONFIG_LED_STATUS1=y
CONFIG_LED_STATUS_BIT1=1
CONFIG_LED_STATUS_FREQ1=10
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

8
configs/mx23_olinuxino_defconfig
Unescape View File

@ -19,6 +19,14 @@ CONFIG_CMD_DHCP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=59
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_LED_STATUS_CMD=y
CONFIG_MMC_MXS=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y

12
configs/omap3_beagle_defconfig
Unescape View File

@ -18,6 +18,18 @@ CONFIG_CMD_USB=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS1=y
CONFIG_LED_STATUS_BIT1=2
CONFIG_LED_STATUS_STATE1=2
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=1
CONFIG_LED_STATUS_GREEN_ENABLE=y
CONFIG_LED_STATUS_GREEN=2
CONFIG_LED_STATUS_CMD=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y

11
configs/socfpga_vining_fpga_defconfig
Unescape View File

@ -47,6 +47,17 @@ CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=48
CONFIG_LED_STATUS1=y
CONFIG_LED_STATUS_BIT1=53
CONFIG_LED_STATUS2=y
CONFIG_LED_STATUS_BIT2=54
CONFIG_LED_STATUS3=y
CONFIG_LED_STATUS_BIT3=65
CONFIG_LED_STATUS_CMD=y
CONFIG_DM_MMC=y
CONFIG_MMC_DW=y
CONFIG_SPI_FLASH=y

20
configs/tqma6s_wru4_mmc_defconfig
Unescape View File

@ -29,6 +29,26 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=0
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS1=y
CONFIG_LED_STATUS_BIT1=1
CONFIG_LED_STATUS_STATE1=2
CONFIG_LED_STATUS2=y
CONFIG_LED_STATUS_BIT2=2
CONFIG_LED_STATUS_STATE2=2
CONFIG_LED_STATUS3=y
CONFIG_LED_STATUS_BIT3=3
CONFIG_LED_STATUS_STATE3=2
CONFIG_LED_STATUS4=y
CONFIG_LED_STATUS_BIT4=4
CONFIG_LED_STATUS_STATE4=2
CONFIG_LED_STATUS5=y
CONFIG_LED_STATUS_BIT5=5
CONFIG_LED_STATUS_STATE5=2
CONFIG_LED_STATUS_CMD=y
CONFIG_PCA9551_LED=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y

11
configs/tricorder_defconfig
Unescape View File

@ -18,6 +18,17 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_UBI=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS1=y
CONFIG_LED_STATUS_BIT1=2
CONFIG_LED_STATUS_STATE1=2
CONFIG_LED_STATUS2=y
CONFIG_LED_STATUS_BIT2=4
CONFIG_LED_STATUS_STATE2=2
CONFIG_LED_STATUS_CMD=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y

11
configs/tricorder_flash_defconfig
Unescape View File

@ -18,6 +18,17 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_UBI=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS1=y
CONFIG_LED_STATUS_BIT1=2
CONFIG_LED_STATUS_STATE1=2
CONFIG_LED_STATUS2=y
CONFIG_LED_STATUS_BIT2=4
CONFIG_LED_STATUS_STATE2=2
CONFIG_LED_STATUS_CMD=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y

6
configs/v38b_defconfig
Unescape View File

@ -10,6 +10,12 @@ CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=16
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_PCI is not set
CONFIG_USB=y
CONFIG_USB_STORAGE=y

4
drivers/misc/Makefile
Unescape View File

@ -18,7 +18,7 @@ obj-$(CONFIG_CROS_EC_SANDBOX) += cros_ec_sandbox.o
obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
endif
obj-$(CONFIG_FSL_IIM) += fsl_iim.o
obj-$(CONFIG_GPIO_LED) += gpio_led.o
obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o
obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o
obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
@ -34,7 +34,7 @@ endif
endif
obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o
obj-$(CONFIG_SMSC_SIO1007) += smsc_sio1007.o
obj-$(CONFIG_STATUS_LED) += status_led.o
obj-$(CONFIG_LED_STATUS) += status_led.o
obj-$(CONFIG_SANDBOX) += swap_case.o
ifdef CONFIG_SPL_OF_PLATDATA
ifdef CONFIG_SPL_BUILD

26
drivers/misc/gpio_led.c
Unescape View File

@ -17,7 +17,7 @@ static led_id_t gpio_led_inv[] = CONFIG_GPIO_LED_INVERTED_TABLE;
static int gpio_led_gpio_value(led_id_t mask, int state)
{
int i, gpio_value = (state == STATUS_LED_ON);
int i, gpio_value = (state == CONFIG_LED_STATUS_ON);
for (i = 0; i < ARRAY_SIZE(gpio_led_inv); i++) {
if (gpio_led_inv[i] == mask)
@ -56,51 +56,51 @@ void __led_toggle(led_id_t mask)
/* 'generic' override of colored LED stubs, to use GPIO functions instead */
#ifdef STATUS_LED_RED
#ifdef CONFIG_LED_STATUS_RED
void red_led_on(void)
{
__led_set(STATUS_LED_RED, STATUS_LED_ON);
__led_set(CONFIG_LED_STATUS_RED, CONFIG_LED_STATUS_ON);
}
void red_led_off(void)
{
__led_set(STATUS_LED_RED, STATUS_LED_OFF);
__led_set(CONFIG_LED_STATUS_RED, CONFIG_LED_STATUS_OFF);
}
#endif
#ifdef STATUS_LED_GREEN
#ifdef CONFIG_LED_STATUS_GREEN
void green_led_on(void)
{
__led_set(STATUS_LED_GREEN, STATUS_LED_ON);
__led_set(CONFIG_LED_STATUS_GREEN, CONFIG_LED_STATUS_ON);
}
void green_led_off(void)
{
__led_set(STATUS_LED_GREEN, STATUS_LED_OFF);
__led_set(CONFIG_LED_STATUS_GREEN, CONFIG_LED_STATUS_OFF);
}
#endif
#ifdef STATUS_LED_YELLOW
#ifdef CONFIG_LED_STATUS_YELLOW
void yellow_led_on(void)
{
__led_set(STATUS_LED_YELLOW, STATUS_LED_ON);
__led_set(CONFIG_LED_STATUS_YELLOW, CONFIG_LED_STATUS_ON);
}
void yellow_led_off(void)
{
__led_set(STATUS_LED_YELLOW, STATUS_LED_OFF);
__led_set(CONFIG_LED_STATUS_YELLOW, CONFIG_LED_STATUS_OFF);
}
#endif
#ifdef STATUS_LED_BLUE
#ifdef CONFIG_LED_STATUS_BLUE
void blue_led_on(void)
{
__led_set(STATUS_LED_BLUE, STATUS_LED_ON);
__led_set(CONFIG_LED_STATUS_BLUE, CONFIG_LED_STATUS_ON);
}
void blue_led_off(void)
{
__led_set(STATUS_LED_BLUE, STATUS_LED_OFF);
__led_set(CONFIG_LED_STATUS_BLUE, CONFIG_LED_STATUS_OFF);
}
#endif

2
drivers/misc/pca9551_led.c
Unescape View File

@ -124,7 +124,7 @@ void __led_init(led_id_t id, int state)
void __led_set(led_id_t mask, int state)
{
if (state == STATUS_LED_OFF)
if (state == CONFIG_LED_STATUS_OFF)
pca9551_led_set_state(mask, PCA9551_LED_STATE_OFF);
else
pca9551_led_set_state(mask, PCA9551_LED_STATE_ON);

76
drivers/misc/status_led.c
Unescape View File

@ -27,45 +27,45 @@ typedef struct {
} led_dev_t;
led_dev_t led_dev[] = {
{ STATUS_LED_BIT,
STATUS_LED_STATE,
STATUS_LED_PERIOD,
0,
},
#if defined(STATUS_LED_BIT1)
{ STATUS_LED_BIT1,
STATUS_LED_STATE1,
STATUS_LED_PERIOD1,
0,
},
{ CONFIG_LED_STATUS_BIT,
CONFIG_LED_STATUS_STATE,
LED_STATUS_PERIOD,
0,
},
#if defined(CONFIG_LED_STATUS1)
{ CONFIG_LED_STATUS_BIT1,
CONFIG_LED_STATUS_STATE1,
LED_STATUS_PERIOD1,
0,
},
#endif
#if defined(STATUS_LED_BIT2)
{ STATUS_LED_BIT2,
STATUS_LED_STATE2,
STATUS_LED_PERIOD2,
0,
},
#if defined(CONFIG_LED_STATUS2)
{ CONFIG_LED_STATUS_BIT2,
CONFIG_LED_STATUS_STATE2,
LED_STATUS_PERIOD2,
0,
},
#endif
#if defined(STATUS_LED_BIT3)
{ STATUS_LED_BIT3,
STATUS_LED_STATE3,
STATUS_LED_PERIOD3,
0,
},
#if defined(CONFIG_LED_STATUS3)
{ CONFIG_LED_STATUS_BIT3,
CONFIG_LED_STATUS_STATE3,
LED_STATUS_PERIOD3,
0,
},
#endif
#if defined(STATUS_LED_BIT4)
{ STATUS_LED_BIT4,
STATUS_LED_STATE4,
STATUS_LED_PERIOD4,
0,
},
#if defined(CONFIG_LED_STATUS4)
{ CONFIG_LED_STATUS_BIT4,
CONFIG_LED_STATUS_STATE4,
LED_STATUS_PERIOD4,
0,
},
#endif
#if defined(STATUS_LED_BIT5)
{ STATUS_LED_BIT5,
STATUS_LED_STATE5,
STATUS_LED_PERIOD5,
0,
},
#if defined(CONFIG_LED_STATUS5)
{ CONFIG_LED_STATUS_BIT5,
CONFIG_LED_STATUS_STATE5,
LED_STATUS_PERIOD5,
0,
},
#endif
};
@ -93,7 +93,7 @@ void status_led_tick (ulong timestamp)
for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++) {
if (ld->state != STATUS_LED_BLINKING)
if (ld->state != CONFIG_LED_STATUS_BLINKING)
continue;
if (++ld->cnt >= ld->period) {
@ -117,9 +117,9 @@ void status_led_set (int led, int state)
ld = &led_dev[led];
ld->state = state;
if (state == STATUS_LED_BLINKING) {
if (state == CONFIG_LED_STATUS_BLINKING) {
ld->cnt = 0; /* always start with full period */
state = STATUS_LED_ON; /* always start with LED _ON_ */
state = CONFIG_LED_STATUS_ON; /* always start with LED _ON_ */
}
__led_set (ld->mask, state);
}

2
include/common.h
Unescape View File

@ -911,7 +911,7 @@ static inline struct in_addr getenv_ip(char *var)
int pcmcia_init (void);
#ifdef CONFIG_STATUS_LED
#ifdef CONFIG_LED_STATUS
# include <status_led.h>
#endif

2
include/configs/PATI.h
Unescape View File

@ -50,8 +50,6 @@
#define CONFIG_WATCHDOG /* turn on platform specific watchdog */
/*#define CONFIG_STATUS_LED 1 */ /* Enable status led */
#define CONFIG_LOADS_ECHO 1 /* Echo on for serial download */
/*

6
include/configs/TQM823L.h
Unescape View File

@ -76,12 +76,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#if defined(CONFIG_LCD)
# undef CONFIG_STATUS_LED /* disturbs display */
#else
# define CONFIG_STATUS_LED 1 /* Status LED enabled */
#endif /* CONFIG_LCD */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*

6
include/configs/TQM823M.h
Unescape View File

@ -74,12 +74,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#ifdef CONFIG_LCD
# undef CONFIG_STATUS_LED /* disturbs display */
#else
# define CONFIG_STATUS_LED 1 /* Status LED enabled */
#endif /* CONFIG_LCD */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*

2
include/configs/TQM850L.h
Unescape View File

@ -69,8 +69,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*

2
include/configs/TQM850M.h
Unescape View File

@ -69,8 +69,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*

2
include/configs/TQM855L.h
Unescape View File

@ -71,8 +71,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*

2
include/configs/TQM855M.h
Unescape View File

@ -71,8 +71,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/* enable I2C and select the hardware/software driver */

2
include/configs/TQM860L.h
Unescape View File

@ -71,8 +71,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*

2
include/configs/TQM860M.h
Unescape View File

@ -71,8 +71,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*

2
include/configs/TQM862L.h
Unescape View File

@ -74,8 +74,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*

2
include/configs/TQM862M.h
Unescape View File

@ -74,8 +74,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*

2
include/configs/TQM866M.h
Unescape View File

@ -85,8 +85,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/* enable I2C and select the hardware/software driver */

2
include/configs/TQM885D.h
Unescape View File

@ -79,8 +79,6 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/* enable I2C and select the hardware/software driver */

16
include/configs/bf526-ezbrd.h
Unescape View File

@ -138,22 +138,6 @@
#define CONFIG_UART_CONSOLE 1
/* define to enable run status via led */
/* #define CONFIG_STATUS_LED */
#ifdef CONFIG_STATUS_LED
#define CONFIG_GPIO_LED
#define CONFIG_BOARD_SPECIFIC_LED
/* use LED0 to indicate booting/alive */
#define STATUS_LED_BOOT 0
#define STATUS_LED_BIT GPIO_PF8
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
/* use LED1 to indicate crash */
#define STATUS_LED_CRASH 1
#define STATUS_LED_BIT1 GPIO_PG11
#define STATUS_LED_STATE1 STATUS_LED_ON
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
/* #define STATUS_LED_BIT2 GPIO_PG12 */
#endif
/*
* Pull in common ADI header for remaining command/environment setup

16
include/configs/bf533-stamp.h
Unescape View File

@ -186,22 +186,6 @@
/* #define CONFIG_SHOW_BOOT_PROGRESS */
/* define to enable run status via led */
/* #define CONFIG_STATUS_LED */
#ifdef CONFIG_STATUS_LED
#define CONFIG_GPIO_LED
#define CONFIG_BOARD_SPECIFIC_LED
/* use LED0 to indicate booting/alive */
#define STATUS_LED_BOOT 0
#define STATUS_LED_BIT GPIO_PF2
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
/* use LED1 to indicate crash */
#define STATUS_LED_CRASH 1
#define STATUS_LED_BIT1 GPIO_PF3
#define STATUS_LED_STATE1 STATUS_LED_ON
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
/* #define STATUS_LED_BIT2 GPIO_PF4 */
#endif
/* define to enable splash screen support */

11
include/configs/cl-som-am57x.h
Unescape View File

@ -28,17 +28,6 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_REVISION_TAG
/* Status LED */
#define CONFIG_STATUS_LED /* Status LED enabled */
#define CONFIG_GPIO_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define GREEN_LED_DEV 0
/* cl_som_am57x Green LED is GPIO2_5 */
#define GREEN_LED_GPIO 37
#define STATUS_LED_BIT GREEN_LED_GPIO
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
/* PMIC I2C bus number */
#define CONFIG_SYS_SPD_BUS_NUM 3

7
include/configs/cm_t335.h
Unescape View File

@ -152,14 +152,7 @@
#define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin)
/* Status LED */
#define CONFIG_STATUS_LED
#define CONFIG_GPIO_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_BIT GPIO_PIN(2, 0)
/* Status LED polarity is inversed, so init it in the "off" state */
#define STATUS_LED_STATE STATUS_LED_OFF
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BOOT 0
/* EEPROM */
#define CONFIG_CMD_EEPROM

10
include/configs/cm_t35.h
Unescape View File

@ -254,20 +254,12 @@
GENERATED_GBL_DATA_SIZE)
/* Status LED */
#define CONFIG_STATUS_LED /* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_GPIO_LED
#define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */
#define GREEN_LED_DEV 0
#define STATUS_LED_BIT GREEN_LED_GPIO
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BOOT GREEN_LED_DEV
#define CONFIG_SPLASHIMAGE_GUARD
/* GPIO banks */
#ifdef CONFIG_STATUS_LED
#ifdef CONFIG_LED_STATUS
#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
#endif

10
include/configs/cm_t3517.h
Unescape View File

@ -257,18 +257,10 @@
GENERATED_GBL_DATA_SIZE)
/* Status LED */
#define CONFIG_STATUS_LED /* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_GPIO_LED
#define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */
#define GREEN_LED_DEV 0
#define STATUS_LED_BIT GREEN_LED_GPIO
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BOOT GREEN_LED_DEV
/* GPIO banks */
#ifdef CONFIG_STATUS_LED
#ifdef CONFIG_LED_STATUS
#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
#endif

7
include/configs/eb_cpu5282.h
Unescape View File

@ -35,13 +35,7 @@
#define CONFIG_HW_WATCHDOG
#define CONFIG_STATUS_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_ACTIVE 0
#define STATUS_LED_BIT 0x0008 /* Timer7 GPIO */
#define STATUS_LED_BOOT 0
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_STATE STATUS_LED_OFF
/*----------------------------------------------------------------------*
* Configuration for environment *
@ -65,7 +59,6 @@
*/
#define CONFIG_CMDLINE_EDITING
#define CONFIG_CMD_DATE
#define CONFIG_CMD_LED
#define CONFIG_MCFTMR

13
include/configs/edb93xx.h
Unescape View File

@ -102,20 +102,7 @@
#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0}
/* Status LED */
#define CONFIG_STATUS_LED 1 /* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED 1
#define STATUS_LED_GREEN 0
#define STATUS_LED_RED 1
/* Green */
#define STATUS_LED_BIT STATUS_LED_GREEN
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
/* Red */
#define STATUS_LED_BIT1 STATUS_LED_RED
#define STATUS_LED_STATE1 STATUS_LED_OFF
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
/* Optional value */
#define STATUS_LED_BOOT STATUS_LED_BIT
/* Network hardware configuration */
#define CONFIG_DRIVER_EP93XX_MAC

14
include/configs/motionpro.h
Unescape View File

@ -283,24 +283,10 @@
/*
* Status LED configuration
*/
#define CONFIG_STATUS_LED /* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED
#define ENABLE_GPIO_OUT 0x00000024
#define LED_ON 0x00000010
#ifndef __ASSEMBLY__
/*
* In case of Motion-PRO, a LED is identified by its corresponding
* GPT Enable and Mode Select Register.
*/
typedef volatile unsigned long * led_id_t;
extern void __led_init(led_id_t id, int state);
extern void __led_toggle(led_id_t id);
extern void __led_set(led_id_t id, int state);
#endif /* __ASSEMBLY__ */
/*
* Temperature sensor
*/

9
include/configs/mx23_olinuxino.h
Unescape View File

@ -14,8 +14,6 @@
#define CONFIG_SYS_NO_FLASH
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_LED
/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#define PHYS_SDRAM_1 0x40000000 /* Base address */
@ -34,13 +32,6 @@
#endif
/* Status LED */
#define CONFIG_STATUS_LED
#define CONFIG_GPIO_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_BOOT 0
#define STATUS_LED_BIT MX23_PAD_SSP1_DETECT__GPIO_2_1
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
/* USB */
#ifdef CONFIG_CMD_USB

11
include/configs/omap3_beagle.h
Unescape View File

@ -35,16 +35,6 @@
#define CONFIG_ENV_OVERWRITE
/* Status LED */
#define CONFIG_STATUS_LED 1
#define CONFIG_BOARD_SPECIFIC_LED 1
#define STATUS_LED_BIT 0x01
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT1 0x02
#define STATUS_LED_STATE1 STATUS_LED_ON
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BOOT STATUS_LED_BIT
#define STATUS_LED_GREEN STATUS_LED_BIT1
/* Enable Multi Bus support for I2C */
#define CONFIG_I2C_MULTI_BUS 1
@ -88,7 +78,6 @@
"4m(kernel),-(fs)"
#define CONFIG_CMD_NAND /* NAND support */
#define CONFIG_CMD_LED /* LED support */
#define CONFIG_VIDEO_OMAP3 /* DSS Support */

8
include/configs/omap3_igep00x0.h
Unescape View File

@ -30,19 +30,11 @@
/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
#define CONFIG_STATUS_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_GPIO_LED
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
#define RED_LED_GPIO 27
#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
#define RED_LED_GPIO 16
#endif
#define RED_LED_DEV 0
#define STATUS_LED_BIT RED_LED_GPIO
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BOOT RED_LED_DEV
#endif
/* GPIO banks */

16
include/configs/socfpga_vining_fpga.h
Unescape View File

@ -15,7 +15,6 @@
#define CONFIG_HW_WATCHDOG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_LED
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on VINING_FPGA */
@ -43,21 +42,6 @@
* 2 ... Bottom Green
* 3 ... Bottom Red
*/
#define CONFIG_STATUS_LED
#define CONFIG_GPIO_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_BIT 48
#define STATUS_LED_STATE STATUS_LED_OFF
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT1 53
#define STATUS_LED_STATE1 STATUS_LED_OFF
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT2 54
#define STATUS_LED_STATE2 STATUS_LED_OFF
#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT3 65
#define STATUS_LED_STATE3 STATUS_LED_OFF
#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2)
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)

1
include/configs/stm32f429-discovery.h
Unescape View File

@ -42,7 +42,6 @@
#define CONFIG_ENV_SECT_SIZE (128 << 10)
#define CONFIG_ENV_SIZE (8 << 10)
#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_RED_LED 110
#define CONFIG_GREEN_LED 109

21
include/configs/tqma6_wru4.h
Unescape View File

@ -37,27 +37,6 @@
#define CONFIG_CMD_DATE
/* LED */
#define CONFIG_CMD_LED
#define CONFIG_STATUS_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_BIT 0
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT1 1
#define STATUS_LED_STATE1 STATUS_LED_ON
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT2 2
#define STATUS_LED_STATE2 STATUS_LED_ON
#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT3 3
#define STATUS_LED_STATE3 STATUS_LED_ON
#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT4 4
#define STATUS_LED_STATE4 STATUS_LED_ON
#define STATUS_LED_PERIOD4 (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT5 5
#define STATUS_LED_STATE5 STATUS_LED_ON
#define STATUS_LED_PERIOD5 (CONFIG_SYS_HZ / 2)
/* Bootcounter */
#define CONFIG_BOOTCOUNT_LIMIT

12
include/configs/tricorder.h
Unescape View File

@ -60,18 +60,6 @@
#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 are in GPIO bank 2 */
/* LED support */
#define CONFIG_STATUS_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_CMD_LED /* LED command */
#define STATUS_LED_BIT (1 << 0)
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT1 (1 << 1)
#define STATUS_LED_STATE1 STATUS_LED_ON
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BIT2 (1 << 2)
#define STATUS_LED_STATE2 STATUS_LED_ON
#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2)
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_SERIAL

2
include/configs/v38b.h
Unescape View File

@ -291,8 +291,6 @@
/*
* Status LED
*/
#define CONFIG_STATUS_LED /* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
#define CONFIG_SYS_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */
#ifndef __ASSEMBLY__

59
include/status_led.h
Unescape View File

@ -17,11 +17,24 @@
#ifndef _STATUS_LED_H_
#define _STATUS_LED_H_
#ifdef CONFIG_STATUS_LED
#define STATUS_LED_OFF 0
#define STATUS_LED_BLINKING 1
#define STATUS_LED_ON 2
#ifdef CONFIG_LED_STATUS
#define LED_STATUS_PERIOD (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ)
#ifdef CONFIG_LED_STATUS1
#define LED_STATUS_PERIOD1 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ1)
#endif /* CONFIG_LED_STATUS1 */
#ifdef CONFIG_LED_STATUS2
#define LED_STATUS_PERIOD2 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ2)
#endif /* CONFIG_LED_STATUS2 */
#ifdef CONFIG_LED_STATUS3
#define LED_STATUS_PERIOD3 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ3)
#endif /* CONFIG_LED_STATUS3 */
#ifdef CONFIG_LED_STATUS4
#define LED_STATUS_PERIOD4 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ4)
#endif /* CONFIG_LED_STATUS4 */
#ifdef CONFIG_LED_STATUS5
#define LED_STATUS_PERIOD5 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ5)
#endif /* CONFIG_LED_STATUS5 */
void status_led_init(void);
void status_led_tick (unsigned long timestamp);
@ -34,14 +47,8 @@ void status_led_set (int led, int state);
# define STATUS_LED_ODR im_cpm.cp_pbodr
# define STATUS_LED_DAT im_cpm.cp_pbdat
# define STATUS_LED_BIT 0x00000001
# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE STATUS_LED_BLINKING
# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
/***** MVS v1 **********************************************************/
#elif (defined(CONFIG_MVS) && CONFIG_MVS < 2)
# define STATUS_LED_PAR im_ioport.iop_pdpar
@ -49,17 +56,10 @@ void status_led_set (int led, int state);
# undef STATUS_LED_ODR
# define STATUS_LED_DAT im_ioport.iop_pddat
# define STATUS_LED_BIT 0x00000001
# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE STATUS_LED_BLINKING
# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
/***** Someone else defines these *************************************/
#elif defined(STATUS_LED_PAR)
/*
* ADVICE: Define in your board configuration file rather than
* filling this file up with lots of custom board stuff.
@ -67,26 +67,9 @@ void status_led_set (int led, int state);
#elif defined(CONFIG_V38B)
# define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */
# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE STATUS_LED_BLINKING
# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
#elif defined(CONFIG_MOTIONPRO)
#define STATUS_LED_BIT ((vu_long *) MPC5XXX_GPT6_ENABLE)
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10)
#define STATUS_LED_STATE STATUS_LED_BLINKING
#define STATUS_LED_BIT1 ((vu_long *) MPC5XXX_GPT7_ENABLE)
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10)
#define STATUS_LED_STATE1 STATUS_LED_OFF
#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
#elif defined(CONFIG_BOARD_SPECIFIC_LED)
#elif defined(CONFIG_LED_STATUS_BOARD_SPECIFIC)
/* led_id_t is unsigned long mask */
typedef unsigned long led_id_t;
@ -99,11 +82,11 @@ void __led_blink(led_id_t mask, int freq);
#endif
/************************************************************************/
#ifndef CONFIG_BOARD_SPECIFIC_LED
#ifndef CONFIG_LED_STATUS_BOARD_SPECIFIC
# include <asm/status_led.h>
#endif
#endif /* CONFIG_STATUS_LED */
#endif /* CONFIG_LED_STATUS */
/*
* Coloured LEDs API

6
net/bootp.c
Unescape View File

@ -15,7 +15,7 @@
#include <net/tftp.h>
#include "bootp.h"
#include "nfs.h"
#ifdef CONFIG_STATUS_LED
#ifdef CONFIG_LED_STATUS
#include <status_led.h>
#endif
#ifdef CONFIG_BOOTP_RANDOM_DELAY
@ -359,8 +359,8 @@ static void bootp_handler(uchar *pkt, unsigned dest, struct in_addr sip,
/*
* Got a good BOOTP reply. Copy the data into our variables.
*/
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_OFF);
#endif
store_net_params(bp); /* Store net parameters from reply */

20
net/net.c
Unescape View File

@ -88,7 +88,7 @@
#include <errno.h>
#include <net.h>
#include <net/tftp.h>
#if defined(CONFIG_STATUS_LED)
#if defined(CONFIG_LED_STATUS)
#include <miiphy.h>
#include <status_led.h>
#endif
@ -518,15 +518,15 @@ restart:
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
#if defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN) && \
defined(CONFIG_STATUS_LED) && \
defined(STATUS_LED_RED)
defined(CONFIG_LED_STATUS) && \
defined(CONFIG_LED_STATUS_RED)
/*
* Echo the inverted link state to the fault LED.
*/
if (miiphy_link(eth_get_dev()->name, CONFIG_SYS_FAULT_MII_ADDR))
status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
status_led_set(CONFIG_LED_STATUS_RED, CONFIG_LED_STATUS_OFF);
else
status_led_set(STATUS_LED_RED, STATUS_LED_ON);
status_led_set(CONFIG_LED_STATUS_RED, CONFIG_LED_STATUS_ON);
#endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */
#endif /* CONFIG_MII, ... */
#ifdef CONFIG_USB_KEYBOARD
@ -583,16 +583,18 @@ restart:
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
#if defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN) && \
defined(CONFIG_STATUS_LED) && \
defined(STATUS_LED_RED)
defined(CONFIG_LED_STATUS) && \
defined(CONFIG_LED_STATUS_RED)
/*
* Echo the inverted link state to the fault LED.
*/
if (miiphy_link(eth_get_dev()->name,
CONFIG_SYS_FAULT_MII_ADDR))
status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
status_led_set(CONFIG_LED_STATUS_RED,
CONFIG_LED_STATUS_OFF);
else
status_led_set(STATUS_LED_RED, STATUS_LED_ON);
status_led_set(CONFIG_LED_STATUS_RED,
CONFIG_LED_STATUS_ON);
#endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */
#endif /* CONFIG_MII, ... */
debug_cond(DEBUG_INT_STATE, "--- net_loop timeout\n");

4
scripts/config_whitelist.txt
Unescape View File

@ -332,7 +332,6 @@ CONFIG_BOARD_POSTCLK_INIT
CONFIG_BOARD_RESET
CONFIG_BOARD_REVISION_TAG
CONFIG_BOARD_SIZE_LIMIT
CONFIG_BOARD_SPECIFIC_LED
CONFIG_BOARD_TAURUS
CONFIG_BOARD_TYPES
CONFIG_BOOGER
@ -536,7 +535,6 @@ CONFIG_CMD_IRQ
CONFIG_CMD_JFFS2
CONFIG_CMD_KGDB
CONFIG_CMD_LDRINFO
CONFIG_CMD_LED
CONFIG_CMD_LOADY
CONFIG_CMD_LZMADEC
CONFIG_CMD_MAX6957
@ -1318,7 +1316,6 @@ CONFIG_GPCS_PHY3_ADDR
CONFIG_GPCS_PHY_ADDR
CONFIG_GPIO
CONFIG_GPIO_ENABLE_SPI_FLASH
CONFIG_GPIO_LED
CONFIG_GPIO_LED_INVERTED_TABLE
CONFIG_GPIO_LED_STUBS
CONFIG_GREEN_LED
@ -3096,7 +3093,6 @@ CONFIG_STAMP_CF
CONFIG_STANDALONE_LOAD_ADDR
CONFIG_STATIC_BOARD_REV
CONFIG_STATIC_RELA
CONFIG_STATUS_LED
CONFIG_STD_DEVICES_SETTINGS
CONFIG_STK52XX
CONFIG_STK52XX_REV100

Write Preview
Loading…
Cancel
Save