ARM: dts: uniphier: sync DT with Linux 4.19-rc1

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

arch/arm/dts/uniphier-ld11-global.dts

@@ -54,12 +54,13 @@
 	sound {
 		compatible = "audio-graph-card";
 		label = "UniPhier LD11";
-		widgets = "Headphone", "Headphone Jack";
+		widgets = "Headphone", "Headphones";
 		dais = <&i2s_port2
 			&i2s_port3
 			&i2s_port4
 			&spdif_port0
 			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
 	};
 
 	spdif-out {

arch/arm/dts/uniphier-ld11.dtsi

@@ -407,7 +407,7 @@
 			reg = <0x5a000000 0x400>;
 			interrupts = <0 78 4>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_emmc_1v8>;
+			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sys_clk 4>;
 			resets = <&sys_rst 4>;
 			bus-width = <8>;

arch/arm/dts/uniphier-ld20-global.dts

@@ -54,12 +54,13 @@
 	sound {
 		compatible = "audio-graph-card";
 		label = "UniPhier LD20";
-		widgets = "Headphone", "Headphone Jack";
+		widgets = "Headphone", "Headphones";
 		dais = <&i2s_port2
 			&i2s_port3
 			&i2s_port4
 			&spdif_port0
 			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
 	};
 
 	spdif-out {

arch/arm/dts/uniphier-ld20.dtsi

@@ -58,6 +58,7 @@
 			clocks = <&sys_clk 32>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@100 {
@@ -77,6 +78,7 @@
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -512,7 +514,7 @@
 			reg = <0x5a000000 0x400>;
 			interrupts = <0 78 4>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_emmc_1v8>;
+			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sys_clk 4>;
 			resets = <&sys_rst 4>;
 			bus-width = <8>;

arch/arm/dts/uniphier-ld4.dtsi

@@ -247,9 +247,8 @@
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
 			interrupts = <0 78 4>;
-			pinctrl-names = "default", "1.8v";
+			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
-			pinctrl-1 = <&pinctrl_emmc_1v8>;
 			clocks = <&mio_clk 1>;
 			reset-names = "host", "bridge";
 			resets = <&mio_rst 1>, <&mio_rst 4>;

arch/arm/dts/uniphier-pinctrl.dtsi

@@ -56,11 +56,6 @@
 		function = "emmc";
 	};
 
-	pinctrl_emmc_1v8: emmc-1v8 {
-		groups = "emmc", "emmc_dat8";
-		function = "emmc";
-	};
-
 	pinctrl_ether_mii: ether-mii {
 		groups = "ether_mii";
 		function = "ether_mii";

arch/arm/dts/uniphier-pro4.dtsi

@@ -281,9 +281,8 @@
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
 			interrupts = <0 78 4>;
-			pinctrl-names = "default", "1.8v";
+			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
-			pinctrl-1 = <&pinctrl_emmc_1v8>;
 			clocks = <&mio_clk 1>;
 			reset-names = "host", "bridge";
 			resets = <&mio_rst 1>, <&mio_rst 4>;

arch/arm/dts/uniphier-pxs2.dtsi

@@ -36,6 +36,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -46,6 +47,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -56,6 +58,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
 		};
 	};
 

arch/arm/dts/uniphier-pxs3.dtsi

@@ -327,7 +327,7 @@
 			reg = <0x5a000000 0x400>;
 			interrupts = <0 78 4>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_emmc_1v8>;
+			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sys_clk 4>;
 			resets = <&sys_rst 4>;
 			bus-width = <8>;

arch/arm/dts/uniphier-sld8.dtsi

@@ -251,9 +251,8 @@
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
 			interrupts = <0 78 4>;
-			pinctrl-names = "default", "1.8v";
+			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
-			pinctrl-1 = <&pinctrl_emmc_1v8>;
 			clocks = <&mio_clk 1>;
 			reset-names = "host", "bridge";
 			resets = <&mio_rst 1>, <&mio_rst 4>;