arm: fsl-layerscape: move forward the non-secure access permission setup

Move forward the basic non-secure access enable operation, so the
subsequent individual device access permission can override it.
And collect the dispersed callers in board level, and then move
them to SoC level.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

arch/arm/cpu/armv7/ls102xa/soc.c

@@ -10,6 +10,7 @@
 #include <asm/arch/immap_ls102xa.h>
 #include <asm/arch/ls102xa_soc.h>
 #include <asm/arch/ls102xa_stream_id.h>
+#include <fsl_csu.h>
 
 struct liodn_id_table sec_liodn_tbl[] = {
 	SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
@@ -64,6 +65,10 @@ int arch_soc_init(void)
 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
 	unsigned int major;
 
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+
 #ifdef CONFIG_FSL_QSPI
 	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
 #endif

arch/arm/cpu/armv8/fsl-layerscape/soc.c

@@ -12,6 +12,7 @@
 #include <asm/io.h>
 #include <asm/global_data.h>
 #include <asm/arch-fsl-layerscape/config.h>
+#include <fsl_csu.h>
 #ifdef CONFIG_SYS_FSL_DDR
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr.h>
@@ -305,6 +306,10 @@ void fsl_lsch2_early_init_f(void)
 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
 	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
 
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+
 #ifdef CONFIG_FSL_IFC
 	init_early_memctl_regs();	/* tighten IFC timing */
 #endif

arch/arm/cpu/armv8/fsl-layerscape/spl.c

@@ -8,7 +8,6 @@
 #include <spl.h>
 #include <asm/io.h>
 #include <fsl_ifc.h>
-#include <fsl_csu.h>
 #include <i2c.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -66,9 +65,6 @@ void board_init_f(ulong dummy)
 	/* Clear the BSS */
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
-	enable_layerscape_ns_access();
-#endif
 	board_init_r(NULL, 0);
 }
 #endif

board/freescale/ls1012afrdm/ls1012afrdm.c

@@ -11,7 +11,6 @@
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/soc.h>
 #include <hwconfig.h>
-#include <fsl_csu.h>
 #include <environment.h>
 #include <fsl_mmdc.h>
 #include <netdev.h>
@@ -175,10 +174,6 @@ int board_init(void)
 	gd->env_addr = (ulong)&default_environment[0];
 #endif
 
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
-	enable_layerscape_ns_access();
-#endif
-
 	return 0;
 }
 

board/freescale/ls1012aqds/ls1012aqds.c

@@ -17,7 +17,6 @@
 #include <mmc.h>
 #include <scsi.h>
 #include <fm_eth.h>
-#include <fsl_csu.h>
 #include <fsl_esdhc.h>
 #include <fsl_mmdc.h>
 #include <spl.h>
@@ -207,10 +206,6 @@ int board_init(void)
 	out_le32(&cci->ctrl_ord,
 		 CCI400_CTRLORD_EN_BARRIER);
 
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
-	enable_layerscape_ns_access();
-#endif
-
 #ifdef CONFIG_ENV_IS_NOWHERE
 	gd->env_addr = (ulong)&default_environment[0];
 #endif

board/freescale/ls1012ardb/ls1012ardb.c

@@ -14,7 +14,6 @@
 #include <ahci.h>
 #include <mmc.h>
 #include <scsi.h>
-#include <fsl_csu.h>
 #include <fsl_esdhc.h>
 #include <environment.h>
 #include <fsl_mmdc.h>
@@ -207,10 +206,6 @@ int board_init(void)
 	gd->env_addr = (ulong)&default_environment[0];
 #endif
 
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
-	enable_layerscape_ns_access();
-#endif
-
 	return 0;
 }
 

board/freescale/ls1021aqds/ls1021aqds.c

@@ -446,10 +446,6 @@ int board_init(void)
 
 	ls102xa_smmu_stream_id_init();
 
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
-	enable_layerscape_ns_access();
-#endif
-
 #ifdef CONFIG_U_QE
 	u_qe_init();
 #endif

board/freescale/ls1021atwr/ls1021atwr.c

@@ -489,10 +489,6 @@ int board_init(void)
 
 	ls102xa_smmu_stream_id_init();
 
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
-	enable_layerscape_ns_access();
-#endif
-
 #ifdef CONFIG_U_QE
 	u_qe_init();
 #endif

board/freescale/ls1043aqds/ls1043aqds.c

@@ -17,7 +17,6 @@
 #include <mmc.h>
 #include <scsi.h>
 #include <fm_eth.h>
-#include <fsl_csu.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
 #include <spl.h>
@@ -316,9 +315,6 @@ int board_init(void)
 	config_serdes_mux();
 #endif
 
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
-	enable_layerscape_ns_access();
-#endif
 	return 0;
 }
 

board/freescale/ls1043ardb/ls1043ardb.c

@@ -16,7 +16,6 @@
 #include <mmc.h>
 #include <scsi.h>
 #include <fm_eth.h>
-#include <fsl_csu.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
 #include <fsl_sec.h>
@@ -90,10 +89,6 @@ int board_init(void)
 	init_final_memctl_regs();
 #endif
 
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
-	enable_layerscape_ns_access();
-#endif
-
 #ifdef CONFIG_SECURE_BOOT
 	/* In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.