Driver for NFC NAND controller found on Freescale's MX2 and MX3 processors. Ported from Linux. Tested only with i.MX27 but should works with other MX2 and MX3 processors too. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Scott Wood <scottwood@freescale.com>master
parent
a2c65b47ef
commit
36fab997d8
@ -0,0 +1,880 @@ |
||||
/*
|
||||
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. |
||||
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de |
||||
* Copyright 2009 Ilya Yanok, <yanok@emcraft.com> |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License |
||||
* as published by the Free Software Foundation; either version 2 |
||||
* of the License, or (at your option) any later version. |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
||||
* MA 02110-1301, USA. |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <nand.h> |
||||
#include <linux/err.h> |
||||
#include <asm/io.h> |
||||
#ifdef CONFIG_MX27 |
||||
#include <asm/arch/imx-regs.h> |
||||
#endif |
||||
|
||||
#define DRIVER_NAME "mxc_nand" |
||||
|
||||
struct nfc_regs { |
||||
/* NFC RAM BUFFER Main area 0 */ |
||||
uint8_t main_area0[0x200]; |
||||
uint8_t main_area1[0x200]; |
||||
uint8_t main_area2[0x200]; |
||||
uint8_t main_area3[0x200]; |
||||
/* SPARE BUFFER Spare area 0 */ |
||||
uint8_t spare_area0[0x10]; |
||||
uint8_t spare_area1[0x10]; |
||||
uint8_t spare_area2[0x10]; |
||||
uint8_t spare_area3[0x10]; |
||||
uint8_t pad[0x5c0]; |
||||
/* NFC registers */ |
||||
uint16_t nfc_buf_size; |
||||
uint16_t reserved; |
||||
uint16_t nfc_buf_addr; |
||||
uint16_t nfc_flash_addr; |
||||
uint16_t nfc_flash_cmd; |
||||
uint16_t nfc_config; |
||||
uint16_t nfc_ecc_status_result; |
||||
uint16_t nfc_rsltmain_area; |
||||
uint16_t nfc_rsltspare_area; |
||||
uint16_t nfc_wrprot; |
||||
uint16_t nfc_unlockstart_blkaddr; |
||||
uint16_t nfc_unlockend_blkaddr; |
||||
uint16_t nfc_nf_wrprst; |
||||
uint16_t nfc_config1; |
||||
uint16_t nfc_config2; |
||||
}; |
||||
|
||||
/*
|
||||
* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register |
||||
* for Command operation |
||||
*/ |
||||
#define NFC_CMD 0x1 |
||||
|
||||
/*
|
||||
* Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register |
||||
* for Address operation |
||||
*/ |
||||
#define NFC_ADDR 0x2 |
||||
|
||||
/*
|
||||
* Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register |
||||
* for Input operation |
||||
*/ |
||||
#define NFC_INPUT 0x4 |
||||
|
||||
/*
|
||||
* Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register |
||||
* for Data Output operation |
||||
*/ |
||||
#define NFC_OUTPUT 0x8 |
||||
|
||||
/*
|
||||
* Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register |
||||
* for Read ID operation |
||||
*/ |
||||
#define NFC_ID 0x10 |
||||
|
||||
/*
|
||||
* Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register |
||||
* for Read Status operation |
||||
*/ |
||||
#define NFC_STATUS 0x20 |
||||
|
||||
/*
|
||||
* Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read |
||||
* Status operation |
||||
*/ |
||||
#define NFC_INT 0x8000 |
||||
|
||||
#define NFC_SP_EN (1 << 2) |
||||
#define NFC_ECC_EN (1 << 3) |
||||
#define NFC_BIG (1 << 5) |
||||
#define NFC_RST (1 << 6) |
||||
#define NFC_CE (1 << 7) |
||||
#define NFC_ONE_CYCLE (1 << 8) |
||||
|
||||
typedef enum {false, true} bool; |
||||
|
||||
struct mxc_nand_host { |
||||
struct mtd_info mtd; |
||||
struct nand_chip *nand; |
||||
|
||||
struct nfc_regs __iomem *regs; |
||||
int spare_only; |
||||
int status_request; |
||||
int pagesize_2k; |
||||
int clk_act; |
||||
uint16_t col_addr; |
||||
}; |
||||
|
||||
static struct mxc_nand_host mxc_host; |
||||
static struct mxc_nand_host *host = &mxc_host; |
||||
|
||||
/* Define delays in microsec for NAND device operations */ |
||||
#define TROP_US_DELAY 2000 |
||||
/* Macros to get byte and bit positions of ECC */ |
||||
#define COLPOS(x) ((x) >> 3) |
||||
#define BITPOS(x) ((x) & 0xf) |
||||
|
||||
/* Define single bit Error positions in Main & Spare area */ |
||||
#define MAIN_SINGLEBIT_ERROR 0x4 |
||||
#define SPARE_SINGLEBIT_ERROR 0x1 |
||||
|
||||
/* OOB placement block for use with hardware ecc generation */ |
||||
#ifdef CONFIG_MXC_NAND_HWECC |
||||
static struct nand_ecclayout nand_hw_eccoob = { |
||||
.eccbytes = 5, |
||||
.eccpos = {6, 7, 8, 9, 10}, |
||||
.oobfree = {{0, 5}, {11, 5}, } |
||||
}; |
||||
#else |
||||
static struct nand_ecclayout nand_soft_eccoob = { |
||||
.eccbytes = 6, |
||||
.eccpos = {6, 7, 8, 9, 10, 11}, |
||||
.oobfree = {{0, 5}, {12, 4}, } |
||||
}; |
||||
#endif |
||||
|
||||
static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size) |
||||
{ |
||||
uint32_t *d = dest; |
||||
|
||||
size >>= 2; |
||||
while (size--) |
||||
__raw_writel(__raw_readl(source++), d++); |
||||
return dest; |
||||
} |
||||
|
||||
/*
|
||||
* This function polls the NANDFC to wait for the basic operation to |
||||
* complete by checking the INT bit of config2 register. |
||||
*/ |
||||
static void wait_op_done(struct mxc_nand_host *host, int max_retries, |
||||
uint16_t param) |
||||
{ |
||||
uint32_t tmp; |
||||
|
||||
while (max_retries-- > 0) { |
||||
if (readw(&host->regs->nfc_config2) & NFC_INT) { |
||||
tmp = readw(&host->regs->nfc_config2); |
||||
tmp &= ~NFC_INT; |
||||
writew(tmp, &host->regs->nfc_config2); |
||||
break; |
||||
} |
||||
udelay(1); |
||||
} |
||||
if (max_retries < 0) { |
||||
MTDDEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n", |
||||
__func__, param); |
||||
} |
||||
} |
||||
|
||||
/*
|
||||
* This function issues the specified command to the NAND device and |
||||
* waits for completion. |
||||
*/ |
||||
static void send_cmd(struct mxc_nand_host *host, uint16_t cmd) |
||||
{ |
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd); |
||||
|
||||
writew(cmd, &host->regs->nfc_flash_cmd); |
||||
writew(NFC_CMD, &host->regs->nfc_config2); |
||||
|
||||
/* Wait for operation to complete */ |
||||
wait_op_done(host, TROP_US_DELAY, cmd); |
||||
} |
||||
|
||||
/*
|
||||
* This function sends an address (or partial address) to the |
||||
* NAND device. The address is used to select the source/destination for |
||||
* a NAND command. |
||||
*/ |
||||
static void send_addr(struct mxc_nand_host *host, uint16_t addr) |
||||
{ |
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr); |
||||
|
||||
writew(addr, &host->regs->nfc_flash_addr); |
||||
writew(NFC_ADDR, &host->regs->nfc_config2); |
||||
|
||||
/* Wait for operation to complete */ |
||||
wait_op_done(host, TROP_US_DELAY, addr); |
||||
} |
||||
|
||||
/*
|
||||
* This function requests the NANDFC to initate the transfer |
||||
* of data currently in the NANDFC RAM buffer to the NAND device. |
||||
*/ |
||||
static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, |
||||
int spare_only) |
||||
{ |
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only); |
||||
|
||||
writew(buf_id, &host->regs->nfc_buf_addr); |
||||
|
||||
/* Configure spare or page+spare access */ |
||||
if (!host->pagesize_2k) { |
||||
uint16_t config1 = readw(&host->regs->nfc_config1); |
||||
if (spare_only) |
||||
config1 |= NFC_SP_EN; |
||||
else |
||||
config1 &= ~(NFC_SP_EN); |
||||
writew(config1, &host->regs->nfc_config1); |
||||
} |
||||
|
||||
writew(NFC_INPUT, &host->regs->nfc_config2); |
||||
|
||||
/* Wait for operation to complete */ |
||||
wait_op_done(host, TROP_US_DELAY, spare_only); |
||||
} |
||||
|
||||
/*
|
||||
* Requests NANDFC to initated the transfer of data from the |
||||
* NAND device into in the NANDFC ram buffer. |
||||
*/ |
||||
static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, |
||||
int spare_only) |
||||
{ |
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only); |
||||
|
||||
writew(buf_id, &host->regs->nfc_buf_addr); |
||||
|
||||
/* Configure spare or page+spare access */ |
||||
if (!host->pagesize_2k) { |
||||
uint32_t config1 = readw(&host->regs->nfc_config1); |
||||
if (spare_only) |
||||
config1 |= NFC_SP_EN; |
||||
else |
||||
config1 &= ~NFC_SP_EN; |
||||
writew(config1, &host->regs->nfc_config1); |
||||
} |
||||
|
||||
writew(NFC_OUTPUT, &host->regs->nfc_config2); |
||||
|
||||
/* Wait for operation to complete */ |
||||
wait_op_done(host, TROP_US_DELAY, spare_only); |
||||
} |
||||
|
||||
/* Request the NANDFC to perform a read of the NAND device ID. */ |
||||
static void send_read_id(struct mxc_nand_host *host) |
||||
{ |
||||
uint16_t tmp; |
||||
|
||||
/* NANDFC buffer 0 is used for device ID output */ |
||||
writew(0x0, &host->regs->nfc_buf_addr); |
||||
|
||||
/* Read ID into main buffer */ |
||||
tmp = readw(&host->regs->nfc_config1); |
||||
tmp &= ~NFC_SP_EN; |
||||
writew(tmp, &host->regs->nfc_config1); |
||||
|
||||
writew(NFC_ID, &host->regs->nfc_config2); |
||||
|
||||
/* Wait for operation to complete */ |
||||
wait_op_done(host, TROP_US_DELAY, 0); |
||||
} |
||||
|
||||
/*
|
||||
* This function requests the NANDFC to perform a read of the |
||||
* NAND device status and returns the current status. |
||||
*/ |
||||
static uint16_t get_dev_status(struct mxc_nand_host *host) |
||||
{ |
||||
void __iomem *main_buf = host->regs->main_area1; |
||||
uint32_t store; |
||||
uint16_t ret, tmp; |
||||
/* Issue status request to NAND device */ |
||||
|
||||
/* store the main area1 first word, later do recovery */ |
||||
store = readl(main_buf); |
||||
/* NANDFC buffer 1 is used for device status */ |
||||
writew(1, &host->regs->nfc_buf_addr); |
||||
|
||||
/* Read status into main buffer */ |
||||
tmp = readw(&host->regs->nfc_config1); |
||||
tmp &= ~NFC_SP_EN; |
||||
writew(tmp, &host->regs->nfc_config1); |
||||
|
||||
writew(NFC_STATUS, &host->regs->nfc_config2); |
||||
|
||||
/* Wait for operation to complete */ |
||||
wait_op_done(host, TROP_US_DELAY, 0); |
||||
|
||||
/*
|
||||
* Status is placed in first word of main buffer |
||||
* get status, then recovery area 1 data |
||||
*/ |
||||
ret = readw(main_buf); |
||||
writel(store, main_buf); |
||||
|
||||
return ret; |
||||
} |
||||
|
||||
/* This function is used by upper layer to checks if device is ready */ |
||||
static int mxc_nand_dev_ready(struct mtd_info *mtd) |
||||
{ |
||||
/*
|
||||
* NFC handles R/B internally. Therefore, this function |
||||
* always returns status as ready. |
||||
*/ |
||||
return 1; |
||||
} |
||||
|
||||
#ifdef CONFIG_MXC_NAND_HWECC |
||||
static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode) |
||||
{ |
||||
/*
|
||||
* If HW ECC is enabled, we turn it on during init. There is |
||||
* no need to enable again here. |
||||
*/ |
||||
} |
||||
|
||||
static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, |
||||
u_char *read_ecc, u_char *calc_ecc) |
||||
{ |
||||
struct nand_chip *nand_chip = mtd->priv; |
||||
struct mxc_nand_host *host = nand_chip->priv; |
||||
|
||||
/*
|
||||
* 1-Bit errors are automatically corrected in HW. No need for |
||||
* additional correction. 2-Bit errors cannot be corrected by |
||||
* HW ECC, so we need to return failure |
||||
*/ |
||||
uint16_t ecc_status = readw(&host->regs->nfc_ecc_status_result); |
||||
|
||||
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) { |
||||
MTDDEBUG(MTD_DEBUG_LEVEL0, |
||||
"MXC_NAND: HWECC uncorrectable 2-bit ECC error\n"); |
||||
return -1; |
||||
} |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, |
||||
u_char *ecc_code) |
||||
{ |
||||
return 0; |
||||
} |
||||
#endif |
||||
|
||||
static u_char mxc_nand_read_byte(struct mtd_info *mtd) |
||||
{ |
||||
struct nand_chip *nand_chip = mtd->priv; |
||||
struct mxc_nand_host *host = nand_chip->priv; |
||||
uint8_t ret = 0; |
||||
uint16_t col; |
||||
uint16_t __iomem *main_buf = |
||||
(uint16_t __iomem *)host->regs->main_area0; |
||||
uint16_t __iomem *spare_buf = |
||||
(uint16_t __iomem *)host->regs->spare_area0; |
||||
union { |
||||
uint16_t word; |
||||
uint8_t bytes[2]; |
||||
} nfc_word; |
||||
|
||||
/* Check for status request */ |
||||
if (host->status_request) |
||||
return get_dev_status(host) & 0xFF; |
||||
|
||||
/* Get column for 16-bit access */ |
||||
col = host->col_addr >> 1; |
||||
|
||||
/* If we are accessing the spare region */ |
||||
if (host->spare_only) |
||||
nfc_word.word = readw(&spare_buf[col]); |
||||
else |
||||
nfc_word.word = readw(&main_buf[col]); |
||||
|
||||
/* Pick upper/lower byte of word from RAM buffer */ |
||||
ret = nfc_word.bytes[host->col_addr & 0x1]; |
||||
|
||||
/* Update saved column address */ |
||||
if (nand_chip->options & NAND_BUSWIDTH_16) |
||||
host->col_addr += 2; |
||||
else |
||||
host->col_addr++; |
||||
|
||||
return ret; |
||||
} |
||||
|
||||
static uint16_t mxc_nand_read_word(struct mtd_info *mtd) |
||||
{ |
||||
struct nand_chip *nand_chip = mtd->priv; |
||||
struct mxc_nand_host *host = nand_chip->priv; |
||||
uint16_t col, ret; |
||||
uint16_t __iomem *p; |
||||
|
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, |
||||
"mxc_nand_read_word(col = %d)\n", host->col_addr); |
||||
|
||||
col = host->col_addr; |
||||
/* Adjust saved column address */ |
||||
if (col < mtd->writesize && host->spare_only) |
||||
col += mtd->writesize; |
||||
|
||||
if (col < mtd->writesize) { |
||||
p = (uint16_t __iomem *)(host->regs->main_area0 + (col >> 1)); |
||||
} else { |
||||
p = (uint16_t __iomem *)(host->regs->spare_area0 + |
||||
((col - mtd->writesize) >> 1)); |
||||
} |
||||
|
||||
if (col & 1) { |
||||
union { |
||||
uint16_t word; |
||||
uint8_t bytes[2]; |
||||
} nfc_word[3]; |
||||
|
||||
nfc_word[0].word = readw(p); |
||||
nfc_word[1].word = readw(p + 1); |
||||
|
||||
nfc_word[2].bytes[0] = nfc_word[0].bytes[1]; |
||||
nfc_word[2].bytes[1] = nfc_word[1].bytes[0]; |
||||
|
||||
ret = nfc_word[2].word; |
||||
} else { |
||||
ret = readw(p); |
||||
} |
||||
|
||||
/* Update saved column address */ |
||||
host->col_addr = col + 2; |
||||
|
||||
return ret; |
||||
} |
||||
|
||||
/*
|
||||
* Write data of length len to buffer buf. The data to be |
||||
* written on NAND Flash is first copied to RAMbuffer. After the Data Input |
||||
* Operation by the NFC, the data is written to NAND Flash |
||||
*/ |
||||
static void mxc_nand_write_buf(struct mtd_info *mtd, |
||||
const u_char *buf, int len) |
||||
{ |
||||
struct nand_chip *nand_chip = mtd->priv; |
||||
struct mxc_nand_host *host = nand_chip->priv; |
||||
int n, col, i = 0; |
||||
|
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, |
||||
"mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr, |
||||
len); |
||||
|
||||
col = host->col_addr; |
||||
|
||||
/* Adjust saved column address */ |
||||
if (col < mtd->writesize && host->spare_only) |
||||
col += mtd->writesize; |
||||
|
||||
n = mtd->writesize + mtd->oobsize - col; |
||||
n = min(len, n); |
||||
|
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, |
||||
"%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n); |
||||
|
||||
while (n > 0) { |
||||
void __iomem *p; |
||||
|
||||
if (col < mtd->writesize) { |
||||
p = host->regs->main_area0 + (col & ~3); |
||||
} else { |
||||
p = host->regs->spare_area0 - |
||||
mtd->writesize + (col & ~3); |
||||
} |
||||
|
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, "%s:%d: p = %p\n", __func__, |
||||
__LINE__, p); |
||||
|
||||
if (((col | (unsigned long)&buf[i]) & 3) || n < 4) { |
||||
union { |
||||
uint32_t word; |
||||
uint8_t bytes[4]; |
||||
} nfc_word; |
||||
|
||||
nfc_word.word = readl(p); |
||||
nfc_word.bytes[col & 3] = buf[i++]; |
||||
n--; |
||||
col++; |
||||
|
||||
writel(nfc_word.word, p); |
||||
} else { |
||||
int m = mtd->writesize - col; |
||||
|
||||
if (col >= mtd->writesize) |
||||
m += mtd->oobsize; |
||||
|
||||
m = min(n, m) & ~3; |
||||
|
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, |
||||
"%s:%d: n = %d, m = %d, i = %d, col = %d\n", |
||||
__func__, __LINE__, n, m, i, col); |
||||
|
||||
mxc_nand_memcpy32(p, (uint32_t *)&buf[i], m); |
||||
col += m; |
||||
i += m; |
||||
n -= m; |
||||
} |
||||
} |
||||
/* Update saved column address */ |
||||
host->col_addr = col; |
||||
} |
||||
|
||||
/*
|
||||
* Read the data buffer from the NAND Flash. To read the data from NAND |
||||
* Flash first the data output cycle is initiated by the NFC, which copies |
||||
* the data to RAMbuffer. This data of length len is then copied to buffer buf. |
||||
*/ |
||||
static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) |
||||
{ |
||||
struct nand_chip *nand_chip = mtd->priv; |
||||
struct mxc_nand_host *host = nand_chip->priv; |
||||
int n, col, i = 0; |
||||
|
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, |
||||
"mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr, len); |
||||
|
||||
col = host->col_addr; |
||||
|
||||
/* Adjust saved column address */ |
||||
if (col < mtd->writesize && host->spare_only) |
||||
col += mtd->writesize; |
||||
|
||||
n = mtd->writesize + mtd->oobsize - col; |
||||
n = min(len, n); |
||||
|
||||
while (n > 0) { |
||||
void __iomem *p; |
||||
|
||||
if (col < mtd->writesize) { |
||||
p = host->regs->main_area0 + (col & ~3); |
||||
} else { |
||||
p = host->regs->spare_area0 - |
||||
mtd->writesize + (col & ~3); |
||||
} |
||||
|
||||
if (((col | (int)&buf[i]) & 3) || n < 4) { |
||||
union { |
||||
uint32_t word; |
||||
uint8_t bytes[4]; |
||||
} nfc_word; |
||||
|
||||
nfc_word.word = readl(p); |
||||
buf[i++] = nfc_word.bytes[col & 3]; |
||||
n--; |
||||
col++; |
||||
} else { |
||||
int m = mtd->writesize - col; |
||||
|
||||
if (col >= mtd->writesize) |
||||
m += mtd->oobsize; |
||||
|
||||
m = min(n, m) & ~3; |
||||
mxc_nand_memcpy32((uint32_t *)&buf[i], p, m); |
||||
|
||||
col += m; |
||||
i += m; |
||||
n -= m; |
||||
} |
||||
} |
||||
/* Update saved column address */ |
||||
host->col_addr = col; |
||||
} |
||||
|
||||
/*
|
||||
* Used by the upper layer to verify the data in NAND Flash |
||||
* with the data in the buf. |
||||
*/ |
||||
static int mxc_nand_verify_buf(struct mtd_info *mtd, |
||||
const u_char *buf, int len) |
||||
{ |
||||
u_char tmp[256]; |
||||
uint bsize; |
||||
|
||||
while (len) { |
||||
bsize = min(len, 256); |
||||
mxc_nand_read_buf(mtd, tmp, bsize); |
||||
|
||||
if (memcmp(buf, tmp, bsize)) |
||||
return 1; |
||||
|
||||
buf += bsize; |
||||
len -= bsize; |
||||
} |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
/*
|
||||
* This function is used by upper layer for select and |
||||
* deselect of the NAND chip |
||||
*/ |
||||
static void mxc_nand_select_chip(struct mtd_info *mtd, int chip) |
||||
{ |
||||
struct nand_chip *nand_chip = mtd->priv; |
||||
struct mxc_nand_host *host = nand_chip->priv; |
||||
|
||||
switch (chip) { |
||||
case -1: |
||||
/* TODO: Disable the NFC clock */ |
||||
if (host->clk_act) |
||||
host->clk_act = 0; |
||||
break; |
||||
case 0: |
||||
/* TODO: Enable the NFC clock */ |
||||
if (!host->clk_act) |
||||
host->clk_act = 1; |
||||
break; |
||||
|
||||
default: |
||||
break; |
||||
} |
||||
} |
||||
|
||||
/*
|
||||
* Used by the upper layer to write command to NAND Flash for |
||||
* different operations to be carried out on NAND Flash |
||||
*/ |
||||
static void mxc_nand_command(struct mtd_info *mtd, unsigned command, |
||||
int column, int page_addr) |
||||
{ |
||||
struct nand_chip *nand_chip = mtd->priv; |
||||
struct mxc_nand_host *host = nand_chip->priv; |
||||
|
||||
MTDDEBUG(MTD_DEBUG_LEVEL3, |
||||
"mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n", |
||||
command, column, page_addr); |
||||
|
||||
/* Reset command state information */ |
||||
host->status_request = false; |
||||
|
||||
/* Command pre-processing step */ |
||||
switch (command) { |
||||
|
||||
case NAND_CMD_STATUS: |
||||
host->col_addr = 0; |
||||
host->status_request = true; |
||||
break; |
||||
|
||||
case NAND_CMD_READ0: |
||||
host->col_addr = column; |
||||
host->spare_only = false; |
||||
break; |
||||
|
||||
case NAND_CMD_READOOB: |
||||
host->col_addr = column; |
||||
host->spare_only = true; |
||||
if (host->pagesize_2k) |
||||
command = NAND_CMD_READ0; /* only READ0 is valid */ |
||||
break; |
||||
|
||||
case NAND_CMD_SEQIN: |
||||
if (column >= mtd->writesize) { |
||||
/*
|
||||
* before sending SEQIN command for partial write, |
||||
* we need read one page out. FSL NFC does not support |
||||
* partial write. It alway send out 512+ecc+512+ecc ... |
||||
* for large page nand flash. But for small page nand |
||||
* flash, it does support SPARE ONLY operation. |
||||
*/ |
||||
if (host->pagesize_2k) { |
||||
/* call ourself to read a page */ |
||||
mxc_nand_command(mtd, NAND_CMD_READ0, 0, |
||||
page_addr); |
||||
} |
||||
|
||||
host->col_addr = column - mtd->writesize; |
||||
host->spare_only = true; |
||||
|
||||
/* Set program pointer to spare region */ |
||||
if (!host->pagesize_2k) |
||||
send_cmd(host, NAND_CMD_READOOB); |
||||
} else { |
||||
host->spare_only = false; |
||||
host->col_addr = column; |
||||
|
||||
/* Set program pointer to page start */ |
||||
if (!host->pagesize_2k) |
||||
send_cmd(host, NAND_CMD_READ0); |
||||
} |
||||
break; |
||||
|
||||
case NAND_CMD_PAGEPROG: |
||||
send_prog_page(host, 0, host->spare_only); |
||||
|
||||
if (host->pagesize_2k) { |
||||
/* data in 4 areas datas */ |
||||
send_prog_page(host, 1, host->spare_only); |
||||
send_prog_page(host, 2, host->spare_only); |
||||
send_prog_page(host, 3, host->spare_only); |
||||
} |
||||
|
||||
break; |
||||
} |
||||
|
||||
/* Write out the command to the device. */ |
||||
send_cmd(host, command); |
||||
|
||||
/* Write out column address, if necessary */ |
||||
if (column != -1) { |
||||
/*
|
||||
* MXC NANDFC can only perform full page+spare or |
||||
* spare-only read/write. When the upper layers |
||||
* layers perform a read/write buf operation, |
||||
* we will used the saved column adress to index into |
||||
* the full page. |
||||
*/ |
||||
send_addr(host, 0); |
||||
if (host->pagesize_2k) |
||||
/* another col addr cycle for 2k page */ |
||||
send_addr(host, 0); |
||||
} |
||||
|
||||
/* Write out page address, if necessary */ |
||||
if (page_addr != -1) { |
||||
/* paddr_0 - p_addr_7 */ |
||||
send_addr(host, (page_addr & 0xff)); |
||||
|
||||
if (host->pagesize_2k) { |
||||
send_addr(host, (page_addr >> 8) & 0xFF); |
||||
if (mtd->size >= 0x10000000) { |
||||
/* paddr_8 - paddr_15 */ |
||||
send_addr(host, (page_addr >> 8) & 0xff); |
||||
send_addr(host, (page_addr >> 16) & 0xff); |
||||
} else { |
||||
/* paddr_8 - paddr_15 */ |
||||
send_addr(host, (page_addr >> 8) & 0xff); |
||||
} |
||||
} else { |
||||
/* One more address cycle for higher density devices */ |
||||
if (mtd->size >= 0x4000000) { |
||||
/* paddr_8 - paddr_15 */ |
||||
send_addr(host, (page_addr >> 8) & 0xff); |
||||
send_addr(host, (page_addr >> 16) & 0xff); |
||||
} else { |
||||
/* paddr_8 - paddr_15 */ |
||||
send_addr(host, (page_addr >> 8) & 0xff); |
||||
} |
||||
} |
||||
} |
||||
|
||||
/* Command post-processing step */ |
||||
switch (command) { |
||||
|
||||
case NAND_CMD_RESET: |
||||
break; |
||||
|
||||
case NAND_CMD_READOOB: |
||||
case NAND_CMD_READ0: |
||||
if (host->pagesize_2k) { |
||||
/* send read confirm command */ |
||||
send_cmd(host, NAND_CMD_READSTART); |
||||
/* read for each AREA */ |
||||
send_read_page(host, 0, host->spare_only); |
||||
send_read_page(host, 1, host->spare_only); |
||||
send_read_page(host, 2, host->spare_only); |
||||
send_read_page(host, 3, host->spare_only); |
||||
} else { |
||||
send_read_page(host, 0, host->spare_only); |
||||
} |
||||
break; |
||||
|
||||
case NAND_CMD_READID: |
||||
host->col_addr = 0; |
||||
send_read_id(host); |
||||
break; |
||||
|
||||
case NAND_CMD_PAGEPROG: |
||||
break; |
||||
|
||||
case NAND_CMD_STATUS: |
||||
break; |
||||
|
||||
case NAND_CMD_ERASE2: |
||||
break; |
||||
} |
||||
} |
||||
|
||||
int board_nand_init(struct nand_chip *this) |
||||
{ |
||||
struct system_control_regs *sc_regs = |
||||
(struct system_control_regs *)IMX_SYSTEM_CTL_BASE; |
||||
struct mtd_info *mtd; |
||||
uint16_t tmp; |
||||
int err = 0; |
||||
|
||||
/* structures must be linked */ |
||||
mtd = &host->mtd; |
||||
mtd->priv = this; |
||||
host->nand = this; |
||||
|
||||
/* 5 us command delay time */ |
||||
this->chip_delay = 5; |
||||
|
||||
this->priv = host; |
||||
this->dev_ready = mxc_nand_dev_ready; |
||||
this->cmdfunc = mxc_nand_command; |
||||
this->select_chip = mxc_nand_select_chip; |
||||
this->read_byte = mxc_nand_read_byte; |
||||
this->read_word = mxc_nand_read_word; |
||||
this->write_buf = mxc_nand_write_buf; |
||||
this->read_buf = mxc_nand_read_buf; |
||||
this->verify_buf = mxc_nand_verify_buf; |
||||
|
||||
host->regs = (struct nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE; |
||||
host->clk_act = 1; |
||||
|
||||
#ifdef CONFIG_MXC_NAND_HWECC |
||||
this->ecc.calculate = mxc_nand_calculate_ecc; |
||||
this->ecc.hwctl = mxc_nand_enable_hwecc; |
||||
this->ecc.correct = mxc_nand_correct_data; |
||||
this->ecc.mode = NAND_ECC_HW; |
||||
this->ecc.size = 512; |
||||
this->ecc.bytes = 3; |
||||
this->ecc.layout = &nand_hw_eccoob; |
||||
tmp = readw(&host->regs->nfc_config1); |
||||
tmp |= NFC_ECC_EN; |
||||
writew(tmp, &host->regs->nfc_config1); |
||||
#else |
||||
this->ecc.layout = &nand_soft_eccoob; |
||||
this->ecc.mode = NAND_ECC_SOFT; |
||||
tmp = readw(&host->regs->nfc_config1); |
||||
tmp &= ~NFC_ECC_EN; |
||||
writew(tmp, &host->regs->nfc_config1); |
||||
#endif |
||||
|
||||
/* Reset NAND */ |
||||
this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); |
||||
|
||||
/*
|
||||
* preset operation |
||||
* Unlock the internal RAM Buffer |
||||
*/ |
||||
writew(0x2, &host->regs->nfc_config); |
||||
|
||||
/* Blocks to be unlocked */ |
||||
writew(0x0, &host->regs->nfc_unlockstart_blkaddr); |
||||
writew(0x4000, &host->regs->nfc_unlockend_blkaddr); |
||||
|
||||
/* Unlock Block Command for given address range */ |
||||
writew(0x4, &host->regs->nfc_wrprot); |
||||
|
||||
/* NAND bus width determines access funtions used by upper layer */ |
||||
if (readl(&sc_regs->fmcr) & NF_16BIT_SEL) |
||||
this->options |= NAND_BUSWIDTH_16; |
||||
|
||||
host->pagesize_2k = 0; |
||||
|
||||
return err; |
||||
} |
Loading…
Reference in new issue