Import the RCar Gen3 DTS and headers from upstream Linux kernel v4.13, commit 569dbb88e80deb68974ef6fdd6a13edb9d686261 . This includes both M3 and H3 ULCB and Salvator-X boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>master
Marek Vasut
7 years ago
committed by
Nobuhiro Iwamatsu
parent
91ebf30093
commit
37a7908137
@ -0,0 +1,629 @@ |
||||
/* |
||||
* Device Tree Source for common parts of Salvator-X board variants |
||||
* |
||||
* Copyright (C) 2015-2016 Renesas Electronics Corp. |
||||
* |
||||
* This file is licensed under the terms of the GNU General Public License |
||||
* version 2. This program is licensed "as is" without any warranty of any |
||||
* kind, whether express or implied. |
||||
*/ |
||||
|
||||
/* |
||||
* SSI-AK4613 |
||||
* |
||||
* This command is required when Playback/Capture |
||||
* |
||||
* amixer set "DVC Out" 100% |
||||
* amixer set "DVC In" 100% |
||||
* |
||||
* You can use Mute |
||||
* |
||||
* amixer set "DVC Out Mute" on |
||||
* amixer set "DVC In Mute" on |
||||
* |
||||
* You can use Volume Ramp |
||||
* |
||||
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" |
||||
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" |
||||
* amixer set "DVC Out Ramp" on |
||||
* aplay xxx.wav & |
||||
* amixer set "DVC Out" 80% // Volume Down |
||||
* amixer set "DVC Out" 100% // Volume Up |
||||
*/ |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
|
||||
/ { |
||||
aliases { |
||||
serial0 = &scif2; |
||||
serial1 = &scif1; |
||||
ethernet0 = &avb; |
||||
}; |
||||
|
||||
chosen { |
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; |
||||
stdout-path = "serial0:115200n8"; |
||||
}; |
||||
|
||||
audio_clkout: audio-clkout { |
||||
/* |
||||
* This is same as <&rcar_sound 0> |
||||
* but needed to avoid cs2000/rcar_sound probe dead-lock |
||||
*/ |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <11289600>; |
||||
}; |
||||
|
||||
backlight: backlight { |
||||
compatible = "pwm-backlight"; |
||||
pwms = <&pwm1 0 50000>; |
||||
|
||||
brightness-levels = <256 128 64 16 8 4 0>; |
||||
default-brightness-level = <6>; |
||||
|
||||
enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
reg_1p8v: regulator0 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "fixed-1.8V"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-boot-on; |
||||
regulator-always-on; |
||||
}; |
||||
|
||||
reg_3p3v: regulator1 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "fixed-3.3V"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-boot-on; |
||||
regulator-always-on; |
||||
}; |
||||
|
||||
rsnd_ak4613: sound { |
||||
compatible = "simple-audio-card"; |
||||
|
||||
simple-audio-card,format = "left_j"; |
||||
simple-audio-card,bitclock-master = <&sndcpu>; |
||||
simple-audio-card,frame-master = <&sndcpu>; |
||||
|
||||
sndcpu: simple-audio-card,cpu { |
||||
sound-dai = <&rcar_sound>; |
||||
}; |
||||
|
||||
sndcodec: simple-audio-card,codec { |
||||
sound-dai = <&ak4613>; |
||||
}; |
||||
}; |
||||
|
||||
vbus0_usb2: regulator-vbus0-usb2 { |
||||
compatible = "regulator-fixed"; |
||||
|
||||
regulator-name = "USB20_VBUS0"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
|
||||
gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; |
||||
enable-active-high; |
||||
}; |
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 { |
||||
compatible = "regulator-fixed"; |
||||
|
||||
regulator-name = "SDHI0 Vcc"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
|
||||
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
||||
enable-active-high; |
||||
}; |
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 { |
||||
compatible = "regulator-gpio"; |
||||
|
||||
regulator-name = "SDHI0 VccQ"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
|
||||
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; |
||||
gpios-states = <1>; |
||||
states = <3300000 1 |
||||
1800000 0>; |
||||
}; |
||||
|
||||
vcc_sdhi3: regulator-vcc-sdhi3 { |
||||
compatible = "regulator-fixed"; |
||||
|
||||
regulator-name = "SDHI3 Vcc"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
|
||||
gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; |
||||
enable-active-high; |
||||
}; |
||||
|
||||
vccq_sdhi3: regulator-vccq-sdhi3 { |
||||
compatible = "regulator-gpio"; |
||||
|
||||
regulator-name = "SDHI3 VccQ"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
|
||||
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; |
||||
gpios-states = <1>; |
||||
states = <3300000 1 |
||||
1800000 0>; |
||||
}; |
||||
|
||||
hdmi0-out { |
||||
compatible = "hdmi-connector"; |
||||
label = "HDMI0 OUT"; |
||||
type = "a"; |
||||
|
||||
port { |
||||
hdmi0_con: endpoint { |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
hdmi1-out { |
||||
compatible = "hdmi-connector"; |
||||
label = "HDMI1 OUT"; |
||||
type = "a"; |
||||
|
||||
port { |
||||
hdmi1_con: endpoint { |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
vga { |
||||
compatible = "vga-connector"; |
||||
|
||||
port { |
||||
vga_in: endpoint { |
||||
remote-endpoint = <&adv7123_out>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
vga-encoder { |
||||
compatible = "adi,adv7123"; |
||||
|
||||
ports { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
port@0 { |
||||
reg = <0>; |
||||
adv7123_in: endpoint { |
||||
remote-endpoint = <&du_out_rgb>; |
||||
}; |
||||
}; |
||||
port@1 { |
||||
reg = <1>; |
||||
adv7123_out: endpoint { |
||||
remote-endpoint = <&vga_in>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
x12_clk: x12 { |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <24576000>; |
||||
}; |
||||
|
||||
/* External DU dot clocks */ |
||||
x21_clk: x21-clock { |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <33000000>; |
||||
}; |
||||
|
||||
x22_clk: x22-clock { |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <33000000>; |
||||
}; |
||||
|
||||
x23_clk: x23-clock { |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <25000000>; |
||||
}; |
||||
}; |
||||
|
||||
&audio_clk_a { |
||||
clock-frequency = <22579200>; |
||||
}; |
||||
|
||||
&avb { |
||||
pinctrl-0 = <&avb_pins>; |
||||
pinctrl-names = "default"; |
||||
renesas,no-ether-link; |
||||
phy-handle = <&phy0>; |
||||
status = "okay"; |
||||
|
||||
phy0: ethernet-phy@0 { |
||||
rxc-skew-ps = <1500>; |
||||
reg = <0>; |
||||
interrupt-parent = <&gpio2>; |
||||
interrupts = <11 IRQ_TYPE_LEVEL_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
&du { |
||||
pinctrl-0 = <&du_pins>; |
||||
pinctrl-names = "default"; |
||||
status = "okay"; |
||||
|
||||
ports { |
||||
port@0 { |
||||
endpoint { |
||||
remote-endpoint = <&adv7123_in>; |
||||
}; |
||||
}; |
||||
port@3 { |
||||
lvds_connector: endpoint { |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&ehci0 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&ehci1 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&extalr_clk { |
||||
clock-frequency = <32768>; |
||||
}; |
||||
|
||||
&hsusb { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&i2c2 { |
||||
pinctrl-0 = <&i2c2_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
status = "okay"; |
||||
|
||||
clock-frequency = <100000>; |
||||
|
||||
ak4613: codec@10 { |
||||
compatible = "asahi-kasei,ak4613"; |
||||
#sound-dai-cells = <0>; |
||||
reg = <0x10>; |
||||
clocks = <&rcar_sound 3>; |
||||
|
||||
asahi-kasei,in1-single-end; |
||||
asahi-kasei,in2-single-end; |
||||
asahi-kasei,out1-single-end; |
||||
asahi-kasei,out2-single-end; |
||||
asahi-kasei,out3-single-end; |
||||
asahi-kasei,out4-single-end; |
||||
asahi-kasei,out5-single-end; |
||||
asahi-kasei,out6-single-end; |
||||
}; |
||||
|
||||
cs2000: clk_multiplier@4f { |
||||
#clock-cells = <0>; |
||||
compatible = "cirrus,cs2000-cp"; |
||||
reg = <0x4f>; |
||||
clocks = <&audio_clkout>, <&x12_clk>; |
||||
clock-names = "clk_in", "ref_clk"; |
||||
|
||||
assigned-clocks = <&cs2000>; |
||||
assigned-clock-rates = <24576000>; /* 1/1 divide */ |
||||
}; |
||||
}; |
||||
|
||||
&i2c4 { |
||||
status = "okay"; |
||||
|
||||
csa_vdd: adc@7c { |
||||
compatible = "maxim,max9611"; |
||||
reg = <0x7c>; |
||||
|
||||
shunt-resistor-micro-ohms = <5000>; |
||||
}; |
||||
|
||||
csa_dvfs: adc@7f { |
||||
compatible = "maxim,max9611"; |
||||
reg = <0x7f>; |
||||
|
||||
shunt-resistor-micro-ohms = <5000>; |
||||
}; |
||||
}; |
||||
|
||||
&i2c_dvfs { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&ohci0 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&ohci1 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&pcie_bus_clk { |
||||
clock-frequency = <100000000>; |
||||
}; |
||||
|
||||
&pciec0 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&pciec1 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&pfc { |
||||
pinctrl-0 = <&scif_clk_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
avb_pins: avb { |
||||
mux { |
||||
groups = "avb_link", "avb_phy_int", "avb_mdc", |
||||
"avb_mii"; |
||||
function = "avb"; |
||||
}; |
||||
|
||||
pins_mdc { |
||||
groups = "avb_mdc"; |
||||
drive-strength = <24>; |
||||
}; |
||||
|
||||
pins_mii_tx { |
||||
pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", |
||||
"PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; |
||||
drive-strength = <12>; |
||||
}; |
||||
}; |
||||
|
||||
du_pins: du { |
||||
groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0"; |
||||
function = "du"; |
||||
}; |
||||
|
||||
i2c2_pins: i2c2 { |
||||
groups = "i2c2_a"; |
||||
function = "i2c2"; |
||||
}; |
||||
|
||||
pwm1_pins: pwm1 { |
||||
groups = "pwm1_a"; |
||||
function = "pwm1"; |
||||
}; |
||||
|
||||
scif1_pins: scif1 { |
||||
groups = "scif1_data_a", "scif1_ctrl"; |
||||
function = "scif1"; |
||||
}; |
||||
|
||||
scif2_pins: scif2 { |
||||
groups = "scif2_data_a"; |
||||
function = "scif2"; |
||||
}; |
||||
|
||||
scif_clk_pins: scif_clk { |
||||
groups = "scif_clk_a"; |
||||
function = "scif_clk"; |
||||
}; |
||||
|
||||
sdhi0_pins: sd0 { |
||||
groups = "sdhi0_data4", "sdhi0_ctrl"; |
||||
function = "sdhi0"; |
||||
power-source = <3300>; |
||||
}; |
||||
|
||||
sdhi0_pins_uhs: sd0_uhs { |
||||
groups = "sdhi0_data4", "sdhi0_ctrl"; |
||||
function = "sdhi0"; |
||||
power-source = <1800>; |
||||
}; |
||||
|
||||
sdhi2_pins: sd2 { |
||||
groups = "sdhi2_data8", "sdhi2_ctrl"; |
||||
function = "sdhi2"; |
||||
power-source = <3300>; |
||||
}; |
||||
|
||||
sdhi2_pins_uhs: sd2_uhs { |
||||
groups = "sdhi2_data8", "sdhi2_ctrl"; |
||||
function = "sdhi2"; |
||||
power-source = <1800>; |
||||
}; |
||||
|
||||
sdhi3_pins: sd3 { |
||||
groups = "sdhi3_data4", "sdhi3_ctrl"; |
||||
function = "sdhi3"; |
||||
power-source = <3300>; |
||||
}; |
||||
|
||||
sdhi3_pins_uhs: sd3_uhs { |
||||
groups = "sdhi3_data4", "sdhi3_ctrl"; |
||||
function = "sdhi3"; |
||||
power-source = <1800>; |
||||
}; |
||||
|
||||
sound_pins: sound { |
||||
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; |
||||
function = "ssi"; |
||||
}; |
||||
|
||||
sound_clk_pins: sound_clk { |
||||
groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", |
||||
"audio_clkout_a", "audio_clkout3_a"; |
||||
function = "audio_clk"; |
||||
}; |
||||
|
||||
usb0_pins: usb0 { |
||||
groups = "usb0"; |
||||
function = "usb0"; |
||||
}; |
||||
|
||||
usb1_pins: usb1 { |
||||
mux { |
||||
groups = "usb1"; |
||||
function = "usb1"; |
||||
}; |
||||
|
||||
ovc { |
||||
pins = "GP_6_27"; |
||||
bias-pull-up; |
||||
}; |
||||
|
||||
pwen { |
||||
pins = "GP_6_26"; |
||||
bias-pull-down; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pwm1 { |
||||
pinctrl-0 = <&pwm1_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
status = "okay"; |
||||
}; |
||||
|
||||
&rcar_sound { |
||||
pinctrl-0 = <&sound_pins &sound_clk_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
/* Single DAI */ |
||||
#sound-dai-cells = <0>; |
||||
|
||||
/* audio_clkout0/1/2/3 */ |
||||
#clock-cells = <1>; |
||||
clock-frequency = <12288000 11289600>; |
||||
|
||||
status = "okay"; |
||||
|
||||
/* update <audio_clk_b> to <cs2000> */ |
||||
clocks = <&cpg CPG_MOD 1005>, |
||||
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, |
||||
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, |
||||
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, |
||||
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, |
||||
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, |
||||
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, |
||||
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, |
||||
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, |
||||
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, |
||||
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, |
||||
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, |
||||
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, |
||||
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, |
||||
<&audio_clk_a>, <&cs2000>, |
||||
<&audio_clk_c>, |
||||
<&cpg CPG_CORE CPG_AUDIO_CLK_I>; |
||||
|
||||
rcar_sound,dai { |
||||
dai0 { |
||||
playback = <&ssi0 &src0 &dvc0>; |
||||
capture = <&ssi1 &src1 &dvc1>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&scif1 { |
||||
pinctrl-0 = <&scif1_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
uart-has-rtscts; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&scif2 { |
||||
pinctrl-0 = <&scif2_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
status = "okay"; |
||||
}; |
||||
|
||||
&scif_clk { |
||||
clock-frequency = <14745600>; |
||||
}; |
||||
|
||||
&sdhi0 { |
||||
pinctrl-0 = <&sdhi0_pins>; |
||||
pinctrl-1 = <&sdhi0_pins_uhs>; |
||||
pinctrl-names = "default", "state_uhs"; |
||||
|
||||
vmmc-supply = <&vcc_sdhi0>; |
||||
vqmmc-supply = <&vccq_sdhi0>; |
||||
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; |
||||
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; |
||||
bus-width = <4>; |
||||
sd-uhs-sdr50; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&sdhi2 { |
||||
/* used for on-board 8bit eMMC */ |
||||
pinctrl-0 = <&sdhi2_pins>; |
||||
pinctrl-1 = <&sdhi2_pins_uhs>; |
||||
pinctrl-names = "default", "state_uhs"; |
||||
|
||||
vmmc-supply = <®_3p3v>; |
||||
vqmmc-supply = <®_1p8v>; |
||||
bus-width = <8>; |
||||
mmc-hs200-1_8v; |
||||
non-removable; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&sdhi3 { |
||||
pinctrl-0 = <&sdhi3_pins>; |
||||
pinctrl-1 = <&sdhi3_pins_uhs>; |
||||
pinctrl-names = "default", "state_uhs"; |
||||
|
||||
vmmc-supply = <&vcc_sdhi3>; |
||||
vqmmc-supply = <&vccq_sdhi3>; |
||||
cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; |
||||
wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; |
||||
bus-width = <4>; |
||||
sd-uhs-sdr50; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&ssi1 { |
||||
shared-pin; |
||||
}; |
||||
|
||||
&usb2_phy0 { |
||||
pinctrl-0 = <&usb0_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
vbus-supply = <&vbus0_usb2>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb2_phy1 { |
||||
pinctrl-0 = <&usb1_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
status = "okay"; |
||||
}; |
||||
|
||||
&wdt0 { |
||||
timeout-sec = <60>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&xhci0 { |
||||
status = "okay"; |
||||
}; |
||||
@ -0,0 +1,30 @@ |
||||
/* |
||||
* Device Tree Source for the Salvator-X board |
||||
* |
||||
* Copyright (C) 2015-2016 Renesas Electronics Corp. |
||||
* |
||||
* This file is licensed under the terms of the GNU General Public License |
||||
* version 2. This program is licensed "as is" without any warranty of any |
||||
* kind, whether express or implied. |
||||
*/ |
||||
|
||||
#include "salvator-common.dtsi" |
||||
|
||||
/ { |
||||
model = "Renesas Salvator-X board"; |
||||
compatible = "renesas,salvator-x"; |
||||
}; |
||||
|
||||
&extal_clk { |
||||
clock-frequency = <16666666>; |
||||
}; |
||||
|
||||
&i2c4 { |
||||
versaclock5: clock-generator@6a { |
||||
compatible = "idt,5p49v5923"; |
||||
reg = <0x6a>; |
||||
#clock-cells = <1>; |
||||
clocks = <&x23_clk>; |
||||
clock-names = "xin"; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,367 @@ |
||||
/* |
||||
* Device Tree Source for the R-Car Gen3 ULCB board |
||||
* |
||||
* Copyright (C) 2016 Renesas Electronics Corp. |
||||
* Copyright (C) 2016 Cogent Embedded, Inc. |
||||
* |
||||
* This file is licensed under the terms of the GNU General Public License |
||||
* version 2. This program is licensed "as is" without any warranty of any |
||||
* kind, whether express or implied. |
||||
*/ |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
model = "Renesas R-Car Gen3 ULCB board"; |
||||
|
||||
aliases { |
||||
serial0 = &scif2; |
||||
ethernet0 = &avb; |
||||
}; |
||||
|
||||
chosen { |
||||
stdout-path = "serial0:115200n8"; |
||||
}; |
||||
|
||||
audio_clkout: audio-clkout { |
||||
/* |
||||
* This is same as <&rcar_sound 0> |
||||
* but needed to avoid cs2000/rcar_sound probe dead-lock |
||||
*/ |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <11289600>; |
||||
}; |
||||
|
||||
keyboard { |
||||
compatible = "gpio-keys"; |
||||
|
||||
key-1 { |
||||
linux,code = <KEY_1>; |
||||
label = "SW3"; |
||||
wakeup-source; |
||||
debounce-interval = <20>; |
||||
gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
led5 { |
||||
gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
led6 { |
||||
gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
}; |
||||
|
||||
reg_1p8v: regulator0 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "fixed-1.8V"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-boot-on; |
||||
regulator-always-on; |
||||
}; |
||||
|
||||
reg_3p3v: regulator1 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "fixed-3.3V"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-boot-on; |
||||
regulator-always-on; |
||||
}; |
||||
|
||||
rsnd_ak4613: sound { |
||||
compatible = "simple-audio-card"; |
||||
|
||||
simple-audio-card,format = "left_j"; |
||||
simple-audio-card,bitclock-master = <&sndcpu>; |
||||
simple-audio-card,frame-master = <&sndcpu>; |
||||
|
||||
sndcpu: simple-audio-card,cpu { |
||||
sound-dai = <&rcar_sound>; |
||||
}; |
||||
|
||||
sndcodec: simple-audio-card,codec { |
||||
sound-dai = <&ak4613>; |
||||
}; |
||||
}; |
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 { |
||||
compatible = "regulator-fixed"; |
||||
|
||||
regulator-name = "SDHI0 Vcc"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
|
||||
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
||||
enable-active-high; |
||||
}; |
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 { |
||||
compatible = "regulator-gpio"; |
||||
|
||||
regulator-name = "SDHI0 VccQ"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
|
||||
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; |
||||
gpios-states = <1>; |
||||
states = <3300000 1 |
||||
1800000 0>; |
||||
}; |
||||
|
||||
x12_clk: x12 { |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <24576000>; |
||||
}; |
||||
}; |
||||
|
||||
&audio_clk_a { |
||||
clock-frequency = <22579200>; |
||||
}; |
||||
|
||||
&avb { |
||||
pinctrl-0 = <&avb_pins>; |
||||
pinctrl-names = "default"; |
||||
renesas,no-ether-link; |
||||
phy-handle = <&phy0>; |
||||
status = "okay"; |
||||
|
||||
phy0: ethernet-phy@0 { |
||||
rxc-skew-ps = <1500>; |
||||
reg = <0>; |
||||
interrupt-parent = <&gpio2>; |
||||
interrupts = <11 IRQ_TYPE_LEVEL_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
&ehci1 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&extal_clk { |
||||
clock-frequency = <16666666>; |
||||
}; |
||||
|
||||
&extalr_clk { |
||||
clock-frequency = <32768>; |
||||
}; |
||||
|
||||
&i2c2 { |
||||
pinctrl-0 = <&i2c2_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
status = "okay"; |
||||
|
||||
clock-frequency = <100000>; |
||||
|
||||
ak4613: codec@10 { |
||||
compatible = "asahi-kasei,ak4613"; |
||||
#sound-dai-cells = <0>; |
||||
reg = <0x10>; |
||||
clocks = <&rcar_sound 3>; |
||||
|
||||
asahi-kasei,in1-single-end; |
||||
asahi-kasei,in2-single-end; |
||||
asahi-kasei,out1-single-end; |
||||
asahi-kasei,out2-single-end; |
||||
asahi-kasei,out3-single-end; |
||||
asahi-kasei,out4-single-end; |
||||
asahi-kasei,out5-single-end; |
||||
asahi-kasei,out6-single-end; |
||||
}; |
||||
|
||||
cs2000: clk-multiplier@4f { |
||||
#clock-cells = <0>; |
||||
compatible = "cirrus,cs2000-cp"; |
||||
reg = <0x4f>; |
||||
clocks = <&audio_clkout>, <&x12_clk>; |
||||
clock-names = "clk_in", "ref_clk"; |
||||
|
||||
assigned-clocks = <&cs2000>; |
||||
assigned-clock-rates = <24576000>; /* 1/1 divide */ |
||||
}; |
||||
}; |
||||
|
||||
&ohci1 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&pfc { |
||||
pinctrl-0 = <&scif_clk_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
avb_pins: avb { |
||||
mux { |
||||
groups = "avb_link", "avb_phy_int", "avb_mdc", |
||||
"avb_mii"; |
||||
function = "avb"; |
||||
}; |
||||
|
||||
pins_mdc { |
||||
groups = "avb_mdc"; |
||||
drive-strength = <24>; |
||||
}; |
||||
|
||||
pins_mii_tx { |
||||
pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", |
||||
"PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; |
||||
drive-strength = <12>; |
||||
}; |
||||
}; |
||||
|
||||
i2c2_pins: i2c2 { |
||||
groups = "i2c2_a"; |
||||
function = "i2c2"; |
||||
}; |
||||
|
||||
scif2_pins: scif2 { |
||||
groups = "scif2_data_a"; |
||||
function = "scif2"; |
||||
}; |
||||
|
||||
scif_clk_pins: scif_clk { |
||||
groups = "scif_clk_a"; |
||||
function = "scif_clk"; |
||||
}; |
||||
|
||||
sdhi0_pins: sd0 { |
||||
groups = "sdhi0_data4", "sdhi0_ctrl"; |
||||
function = "sdhi0"; |
||||
power-source = <3300>; |
||||
}; |
||||
|
||||
sdhi0_pins_uhs: sd0_uhs { |
||||
groups = "sdhi0_data4", "sdhi0_ctrl"; |
||||
function = "sdhi0"; |
||||
power-source = <1800>; |
||||
}; |
||||
|
||||
sdhi2_pins: sd2 { |
||||
groups = "sdhi2_data8", "sdhi2_ctrl"; |
||||
function = "sdhi2"; |
||||
power-source = <3300>; |
||||
}; |
||||
|
||||
sdhi2_pins_uhs: sd2_uhs { |
||||
groups = "sdhi2_data8", "sdhi2_ctrl"; |
||||
function = "sdhi2"; |
||||
power-source = <1800>; |
||||
}; |
||||
|
||||
sound_pins: sound { |
||||
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; |
||||
function = "ssi"; |
||||
}; |
||||
|
||||
sound_clk_pins: sound-clk { |
||||
groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", |
||||
"audio_clkout_a", "audio_clkout3_a"; |
||||
function = "audio_clk"; |
||||
}; |
||||
|
||||
usb1_pins: usb1 { |
||||
groups = "usb1"; |
||||
function = "usb1"; |
||||
}; |
||||
}; |
||||
|
||||
&rcar_sound { |
||||
pinctrl-0 = <&sound_pins &sound_clk_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
/* Single DAI */ |
||||
#sound-dai-cells = <0>; |
||||
|
||||
/* audio_clkout0/1/2/3 */ |
||||
#clock-cells = <1>; |
||||
clock-frequency = <12288000 11289600>; |
||||
|
||||
status = "okay"; |
||||
|
||||
/* update <audio_clk_b> to <cs2000> */ |
||||
clocks = <&cpg CPG_MOD 1005>, |
||||
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, |
||||
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, |
||||
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, |
||||
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, |
||||
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, |
||||
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, |
||||
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, |
||||
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, |
||||
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, |
||||
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, |
||||
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, |
||||
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, |
||||
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, |
||||
<&audio_clk_a>, <&cs2000>, |
||||
<&audio_clk_c>, |
||||
<&cpg CPG_CORE CPG_AUDIO_CLK_I>; |
||||
|
||||
rcar_sound,dai { |
||||
dai0 { |
||||
playback = <&ssi0 &src0 &dvc0>; |
||||
capture = <&ssi1 &src1 &dvc1>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&scif2 { |
||||
pinctrl-0 = <&scif2_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
status = "okay"; |
||||
}; |
||||
|
||||
&scif_clk { |
||||
clock-frequency = <14745600>; |
||||
}; |
||||
|
||||
&sdhi0 { |
||||
pinctrl-0 = <&sdhi0_pins>; |
||||
pinctrl-1 = <&sdhi0_pins_uhs>; |
||||
pinctrl-names = "default", "state_uhs"; |
||||
|
||||
vmmc-supply = <&vcc_sdhi0>; |
||||
vqmmc-supply = <&vccq_sdhi0>; |
||||
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; |
||||
bus-width = <4>; |
||||
sd-uhs-sdr50; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&sdhi2 { |
||||
/* used for on-board 8bit eMMC */ |
||||
pinctrl-0 = <&sdhi2_pins>; |
||||
pinctrl-1 = <&sdhi2_pins_uhs>; |
||||
pinctrl-names = "default", "state_uhs"; |
||||
|
||||
vmmc-supply = <®_3p3v>; |
||||
vqmmc-supply = <®_1p8v>; |
||||
bus-width = <8>; |
||||
mmc-hs200-1_8v; |
||||
non-removable; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&ssi1 { |
||||
shared-pin; |
||||
}; |
||||
|
||||
&usb2_phy1 { |
||||
pinctrl-0 = <&usb1_pins>; |
||||
pinctrl-names = "default"; |
||||
|
||||
status = "okay"; |
||||
}; |
||||
|
||||
&wdt0 { |
||||
timeout-sec = <60>; |
||||
status = "okay"; |
||||
}; |
||||
Loading…
Reference in new issue