The board is unmaintained, just like the rest of the IXP. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michael Schwingen <michael@schwingen.org> Cc: Tom Rini <trini@ti.com>master
Marek Vasut
11 years ago
parent
13e0ee7f9a
commit
38da33f3c1
@ -1,8 +0,0 @@ |
||||
#
|
||||
# (C) Copyright 2000-2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := actux3.o
|
||||
@ -1,149 +0,0 @@ |
||||
/*
|
||||
* (C) Copyright 2007 |
||||
* Michael Schwingen, michael@schwingen.org |
||||
* |
||||
* (C) Copyright 2006 |
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de. |
||||
* |
||||
* (C) Copyright 2002 |
||||
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net |
||||
* |
||||
* (C) Copyright 2002 |
||||
* Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
||||
* Marius Groeger <mgroeger@sysgo.de> |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <command.h> |
||||
#include <malloc.h> |
||||
#include <asm/arch/ixp425.h> |
||||
#include <asm/io.h> |
||||
#include <miiphy.h> |
||||
#include "actux3_hw.h" |
||||
|
||||
DECLARE_GLOBAL_DATA_PTR; |
||||
|
||||
int board_early_init_f(void) |
||||
{ |
||||
/* CS1: IPAC-X */ |
||||
writel(0x94d10013, IXP425_EXP_CS1); |
||||
/* CS5: Debug port */ |
||||
writel(0x9d520003, IXP425_EXP_CS5); |
||||
/* CS6: Release/Option register */ |
||||
writel(0x81860001, IXP425_EXP_CS6); |
||||
/* CS7: LEDs */ |
||||
writel(0x80900003, IXP425_EXP_CS7); |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
int board_init(void) |
||||
{ |
||||
/* adress of boot parameters */ |
||||
gd->bd->bi_boot_params = 0x00000100; |
||||
|
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); |
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST); |
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR); |
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD); |
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED5_GN); |
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED6_RT); |
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED6_GN); |
||||
|
||||
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); |
||||
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST); |
||||
|
||||
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR); |
||||
GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD); |
||||
|
||||
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED5_GN); |
||||
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED6_RT); |
||||
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED6_GN); |
||||
|
||||
/*
|
||||
* Setup GPIO's for Interrupt inputs |
||||
*/ |
||||
GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT); |
||||
GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT); |
||||
|
||||
/*
|
||||
* Setup GPIO's for 33MHz clock output |
||||
*/ |
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); |
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); |
||||
writel(0x011001FF, IXP425_GPIO_GPCLKR); |
||||
|
||||
/* we need a minimum PCI reset pulse width after enabling the clock */ |
||||
udelay(533); |
||||
GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); |
||||
GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST); |
||||
|
||||
ACTUX3_LED1_RT(1); |
||||
ACTUX3_LED1_GN(0); |
||||
ACTUX3_LED2_RT(0); |
||||
ACTUX3_LED2_GN(0); |
||||
ACTUX3_LED3_RT(0); |
||||
ACTUX3_LED3_GN(0); |
||||
ACTUX3_LED4_GN(0); |
||||
ACTUX3_LED5_RT(0); |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
/*
|
||||
* Check Board Identity |
||||
*/ |
||||
int checkboard(void) |
||||
{ |
||||
char buf[64]; |
||||
int i = getenv_f("serial#", buf, sizeof(buf)); |
||||
|
||||
puts("Board: AcTux-3 rev."); |
||||
putc(ACTUX3_BOARDREL + 'A' - 1); |
||||
|
||||
if (i > 0) { |
||||
puts (", serial# "); |
||||
puts (buf); |
||||
} |
||||
putc('\n'); |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
/*************************************************************************
|
||||
* get_board_rev() - setup to pass kernel board revision information |
||||
* 0 = reserved |
||||
* 1 = Rev. A |
||||
* 2 = Rev. B |
||||
*************************************************************************/ |
||||
u32 get_board_rev(void) |
||||
{ |
||||
return ACTUX3_BOARDREL; |
||||
} |
||||
|
||||
int dram_init(void) |
||||
{ |
||||
gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); |
||||
return 0; |
||||
} |
||||
|
||||
void reset_phy(void) |
||||
{ |
||||
int i; |
||||
|
||||
/* initialize the PHY */ |
||||
miiphy_reset("NPE0", CONFIG_PHY_ADDR); |
||||
|
||||
/* all LED outputs = Link/Act */ |
||||
miiphy_write("NPE0", CONFIG_PHY_ADDR, 0x16, 0x0AAA); |
||||
|
||||
/*
|
||||
* The Marvell 88E6060 switch comes up with all ports disabled. |
||||
* set all ethernet switch ports to forwarding state |
||||
*/ |
||||
for (i = 1; i <= 5; i++) |
||||
miiphy_write("NPE0", CONFIG_PHY_ADDR + 8 + i, 0x04, 0x03); |
||||
|
||||
} |
||||
@ -1,44 +0,0 @@ |
||||
/*
|
||||
* (C) Copyright 2007 |
||||
* Michael Schwingen, michael@schwingen.org |
||||
* |
||||
* hardware register definitions for the AcTux-3 board. |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef _ACTUX3_HW_H |
||||
#define _ACTUX3_HW_H |
||||
|
||||
/* 0 = LED off,1 = ON */ |
||||
#define ACTUX3_LED1_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) |
||||
#define ACTUX3_LED1_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) |
||||
#define ACTUX3_LED2_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) |
||||
#define ACTUX3_LED2_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 3) |
||||
#define ACTUX3_LED3_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 4) |
||||
#define ACTUX3_LED3_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 5) |
||||
#define ACTUX3_LED4_GN(a) writeb((a)^1, IXP425_EXP_BUS_CS7_BASE_PHYS + 6) |
||||
#define ACTUX3_LED5_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7) |
||||
|
||||
#define ACTUX3_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS |
||||
#define ACTUX3_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) |
||||
#define ACTUX3_OPTION (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0) |
||||
|
||||
/* GPIO settings */ |
||||
#define CONFIG_SYS_GPIO_DBGINT 0 |
||||
#define CONFIG_SYS_GPIO_ETHINT 1 |
||||
#define CONFIG_SYS_GPIO_ETHRST 2 /* Out */ |
||||
#define CONFIG_SYS_GPIO_LED5_GN 3 /* Out */ |
||||
#define CONFIG_SYS_GPIO_LED6_RT 4 /* Out */ |
||||
#define CONFIG_SYS_GPIO_LED6_GN 5 /* Out */ |
||||
#define CONFIG_SYS_GPIO_DSR 6 /* Out */ |
||||
#define CONFIG_SYS_GPIO_DCD 7 /* Out */ |
||||
#define CONFIG_SYS_GPIO_DBGJUMPER 9 |
||||
#define CONFIG_SYS_GPIO_BUTTON1 10 |
||||
#define CONFIG_SYS_GPIO_DBGSENSE 11 |
||||
#define CONFIG_SYS_GPIO_DTR 12 |
||||
#define CONFIG_SYS_GPIO_IORST 13 /* Out */ |
||||
#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ |
||||
#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ |
||||
|
||||
#endif |
||||
@ -1,99 +0,0 @@ |
||||
/* |
||||
* (C) Copyright 2000 |
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") |
||||
OUTPUT_ARCH (arm) |
||||
ENTRY (_start) |
||||
SECTIONS |
||||
{ |
||||
. = 0x00000000; |
||||
|
||||
. = ALIGN (4); |
||||
.text : { |
||||
*(.__image_copy_start) |
||||
arch/arm/cpu/ixp/start.o(.text*) |
||||
net/built-in.o(.text*) |
||||
board/actux3/built-in.o(.text*) |
||||
arch/arm/cpu/ixp/built-in.o(.text*) |
||||
drivers/input/built-in.o(.text*) |
||||
|
||||
. = env_offset; |
||||
common/env_embedded.o(.ppcenv) |
||||
*(.text*) |
||||
} |
||||
|
||||
. = ALIGN(4); |
||||
.rodata : { |
||||
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) |
||||
} |
||||
. = ALIGN(4); |
||||
.data : { |
||||
*(.data*) |
||||
} |
||||
. = ALIGN(4); |
||||
.got : { |
||||
*(.got) |
||||
} |
||||
. =.; |
||||
|
||||
. = ALIGN(4); |
||||
.u_boot_list : { |
||||
KEEP(*(SORT(.u_boot_list*))); |
||||
} |
||||
|
||||
. = ALIGN (4); |
||||
|
||||
.image_copy_end : |
||||
{ |
||||
*(.__image_copy_end) |
||||
} |
||||
|
||||
.rel_dyn_start : |
||||
{ |
||||
*(.__rel_dyn_start) |
||||
} |
||||
|
||||
.rel.dyn : { |
||||
*(.rel*) |
||||
} |
||||
|
||||
.rel_dyn_end : |
||||
{ |
||||
*(.__rel_dyn_end) |
||||
} |
||||
|
||||
_end = .; |
||||
|
||||
/* |
||||
* Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c |
||||
* __bss_base and __bss_limit are for linker only (overlay ordering) |
||||
*/ |
||||
|
||||
.bss_start __rel_dyn_start (OVERLAY) : { |
||||
KEEP(*(.__bss_start)); |
||||
__bss_base = .; |
||||
} |
||||
|
||||
.bss __bss_base (OVERLAY) : { |
||||
*(.bss*) |
||||
. = ALIGN(4); |
||||
__bss_limit = .; |
||||
} |
||||
.bss_end __bss_limit (OVERLAY) : { |
||||
KEEP(*(.__bss_end)); |
||||
} |
||||
|
||||
.dynsym _end : { *(.dynsym) } |
||||
.dynbss : { *(.dynbss) } |
||||
.dynstr : { *(.dynstr*) } |
||||
.dynamic : { *(.dynamic*) } |
||||
.hash : { *(.hash*) } |
||||
.plt : { *(.plt*) } |
||||
.interp : { *(.interp*) } |
||||
.gnu : { *(.gnu*) } |
||||
.ARM.exidx : { *(.ARM.exidx*) } |
||||
} |
||||
@ -1,205 +0,0 @@ |
||||
/*
|
||||
* (C) Copyright 2007 |
||||
* Michael Schwingen, michael@schwingen.org |
||||
* |
||||
* Configuration settings for the AcTux-3 board. |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef __CONFIG_H |
||||
#define __CONFIG_H |
||||
|
||||
#define CONFIG_IXP425 1 |
||||
#define CONFIG_ACTUX3 1 |
||||
|
||||
#define CONFIG_MACH_TYPE 1481 |
||||
|
||||
#define CONFIG_DISPLAY_CPUINFO 1 |
||||
#define CONFIG_DISPLAY_BOARDINFO 1 |
||||
|
||||
#define CONFIG_IXP_SERIAL |
||||
#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2 |
||||
#define CONFIG_BAUDRATE 115200 |
||||
#define CONFIG_BOOTDELAY 3 |
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ |
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 |
||||
#define CONFIG_SYS_LDSCRIPT "board/actux3/u-boot.lds" |
||||
|
||||
/***************************************************************
|
||||
* U-boot generic defines start here. |
||||
***************************************************************/ |
||||
/* Size of malloc() pool */ |
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) |
||||
|
||||
/* allow to overwrite serial and ethaddr */ |
||||
#define CONFIG_ENV_OVERWRITE |
||||
|
||||
/* Command line configuration. */ |
||||
#include <config_cmd_default.h> |
||||
|
||||
#define CONFIG_CMD_ELF |
||||
|
||||
#define CONFIG_BOOTCOMMAND "run boot_flash" |
||||
/* enable passing of ATAGs */ |
||||
#define CONFIG_CMDLINE_TAG 1 |
||||
#define CONFIG_SETUP_MEMORY_TAGS 1 |
||||
#define CONFIG_INITRD_TAG 1 |
||||
#define CONFIG_REVISION_TAG 1 |
||||
|
||||
#if defined(CONFIG_CMD_KGDB) |
||||
# define CONFIG_KGDB_BAUDRATE 230400 |
||||
#endif |
||||
|
||||
/* Miscellaneous configurable options */ |
||||
#define CONFIG_SYS_LONGHELP |
||||
/* Console I/O Buffer Size */ |
||||
#define CONFIG_SYS_CBSIZE 256 |
||||
/* Print Buffer Size */ |
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) |
||||
/* max number of command args */ |
||||
#define CONFIG_SYS_MAXARGS 16 |
||||
/* Boot Argument Buffer Size */ |
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00400000 |
||||
#define CONFIG_SYS_MEMTEST_END 0x00800000 |
||||
|
||||
/* timer clock - 2* OSC_IN system clock */ |
||||
#define CONFIG_IXP425_TIMER_CLK 66666666 |
||||
|
||||
/* default load address */ |
||||
#define CONFIG_SYS_LOAD_ADDR 0x00010000 |
||||
|
||||
/* valid baudrates */ |
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ |
||||
115200, 230400 } |
||||
#define CONFIG_SERIAL_RTS_ACTIVE 1 |
||||
|
||||
/* Expansion bus settings */ |
||||
#define CONFIG_SYS_EXP_CS0 0xbd113442 |
||||
|
||||
/* SDRAM settings */ |
||||
#define CONFIG_NR_DRAM_BANKS 1 |
||||
#define PHYS_SDRAM_1 0x00000000 |
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 |
||||
|
||||
/* 16MB SDRAM */ |
||||
#define CONFIG_SYS_SDR_CONFIG 0x3A |
||||
#define PHYS_SDRAM_1_SIZE 0x01000000 |
||||
#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a |
||||
#define CONFIG_SYS_SDR_MODE_CONFIG 0x1 |
||||
#define CONFIG_SYS_DRAM_SIZE 0x01000000 |
||||
|
||||
/* FLASH organization */ |
||||
#define CONFIG_SYS_TEXT_BASE 0x50000000 |
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 |
||||
/* max number of sectors on one chip */ |
||||
#define CONFIG_SYS_MAX_FLASH_SECT 140 |
||||
#define PHYS_FLASH_1 0x50000000 |
||||
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 } |
||||
|
||||
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
||||
#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 |
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10) |
||||
#define CONFIG_BOARD_SIZE_LIMIT 262144 |
||||
|
||||
/* Use common CFI driver */ |
||||
#define CONFIG_SYS_FLASH_CFI |
||||
#define CONFIG_FLASH_CFI_DRIVER |
||||
/* no byte writes on IXP4xx */ |
||||
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT |
||||
|
||||
/* print 'E' for empty sector on flinfo */ |
||||
#define CONFIG_SYS_FLASH_EMPTY_INFO |
||||
|
||||
/* Ethernet */ |
||||
|
||||
/* include IXP4xx NPE support */ |
||||
#define CONFIG_IXP4XX_NPE 1 |
||||
|
||||
/* NPE0 PHY address */ |
||||
#define CONFIG_PHY_ADDR 0x10 |
||||
/* MII PHY management */ |
||||
#define CONFIG_MII 1 |
||||
/* fixed-speed switch without standard PHY registers on MII */ |
||||
#define CONFIG_MII_NPE0_FIXEDLINK 1 |
||||
#define CONFIG_MII_NPE0_SPEED 100 |
||||
#define CONFIG_MII_NPE0_FULLDUPLEX 1 |
||||
|
||||
/* Number of ethernet rx buffers & descriptors */ |
||||
#define CONFIG_SYS_RX_ETH_BUFFER 16 |
||||
#define CONFIG_RESET_PHY_R 1 |
||||
/* ethernet switch connected to MII port */ |
||||
#define CONFIG_MII_ETHSWITCH 1 |
||||
|
||||
#define CONFIG_CMD_DHCP |
||||
#define CONFIG_CMD_NET |
||||
#define CONFIG_CMD_MII |
||||
#define CONFIG_CMD_PING |
||||
#undef CONFIG_CMD_NFS |
||||
|
||||
/* BOOTP options */ |
||||
#define CONFIG_BOOTP_BOOTFILESIZE |
||||
#define CONFIG_BOOTP_BOOTPATH |
||||
#define CONFIG_BOOTP_GATEWAY |
||||
#define CONFIG_BOOTP_HOSTNAME |
||||
|
||||
/* Cache Configuration */ |
||||
#define CONFIG_SYS_CACHELINE_SIZE 32 |
||||
|
||||
/*
|
||||
* environment organization: |
||||
* one flash sector, embedded in uboot area (bottom bootblock flash) |
||||
*/ |
||||
#define CONFIG_ENV_IS_IN_FLASH 1 |
||||
#define CONFIG_ENV_SIZE 0x2000 |
||||
#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000) |
||||
#define CONFIG_SYS_USE_PPCENV 1 |
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"npe_ucode=50040000\0" \
|
||||
"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
|
||||
"kerneladdr=50050000\0" \
|
||||
"kernelfile=actux3/uImage\0" \
|
||||
"rootfile=actux3/rootfs\0" \
|
||||
"rootaddr=50170000\0" \
|
||||
"loadaddr=10000\0" \
|
||||
"updateboot_ser=mw.b 10000 ff 40000;" \
|
||||
" loady ${loadaddr};" \
|
||||
" run eraseboot writeboot\0" \
|
||||
"updateboot_net=mw.b 10000 ff 40000;" \
|
||||
" tftp ${loadaddr} actux3/u-boot.bin;" \
|
||||
" run eraseboot writeboot\0" \
|
||||
"eraseboot=protect off 50000000 50003fff;" \
|
||||
" protect off 50006000 5003ffff;" \
|
||||
" erase 50000000 50003fff;" \
|
||||
" erase 50006000 5003ffff\0" \
|
||||
"writeboot=cp.b 10000 50000000 4000;" \
|
||||
" cp.b 16000 50006000 3a000\0" \
|
||||
"updateucode=loady;" \
|
||||
" era ${npe_ucode} +${filesize};" \
|
||||
" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
|
||||
"updateroot=tftp ${loadaddr} ${rootfile};" \
|
||||
" era ${rootaddr} +${filesize};" \
|
||||
" cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
|
||||
"updatekern=tftp ${loadaddr} ${kernelfile};" \
|
||||
" era ${kerneladdr} +${filesize};" \
|
||||
" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
|
||||
"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
|
||||
" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
|
||||
"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
|
||||
" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
|
||||
"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \
|
||||
"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
|
||||
"boot_flash=run flashargs addtty addeth;" \
|
||||
" bootm ${kerneladdr}\0" \
|
||||
"boot_net=run netargs addtty addeth;" \
|
||||
" tftpboot ${loadaddr} ${kernelfile};" \
|
||||
" bootm\0" |
||||
|
||||
/* additions for new relocation code, must be added to all boards */ |
||||
#define CONFIG_SYS_INIT_SP_ADDR \ |
||||
(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) |
||||
|
||||
#endif /* __CONFIG_H */ |
||||
Loading…
Reference in new issue