diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index ba1f7ba..67f4163 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -63,8 +63,15 @@
 #define ARC_AUX_SLC_INVALIDATE	0x905
 #define ARC_AUX_SLC_IVDL	0x910
 #define ARC_AUX_SLC_FLDL	0x912
+#define ARC_AUX_SLC_RGN_START	0x914
+#define ARC_AUX_SLC_RGN_START1	0x915
+#define ARC_AUX_SLC_RGN_END	0x916
+#define ARC_AUX_SLC_RGN_END1	0x917
 #define ARC_BCR_CLUSTER		0xcf
 
+/* MMU Management regs */
+#define ARC_AUX_MMU_BCR		0x06f
+
 /* IO coherency related auxiliary registers */
 #define ARC_AUX_IO_COH_ENABLE	0x500
 #define ARC_AUX_IO_COH_PARTIAL	0x501
diff --git a/arch/arc/lib/cache.c b/arch/arc/lib/cache.c
index 1073e15..a6bbe3c 100644
--- a/arch/arc/lib/cache.c
+++ b/arch/arc/lib/cache.c
@@ -20,12 +20,17 @@
 #define DC_CTRL_INV_MODE_FLUSH	(1 << 6)
 #define DC_CTRL_FLUSH_STATUS	(1 << 8)
 #define CACHE_VER_NUM_MASK	0xF
-#define SLC_CTRL_SB		(1 << 2)
 
 #define OP_INV		0x1
 #define OP_FLUSH	0x2
 #define OP_INV_IC	0x3
 
+/* Bit val in SLC_CONTROL */
+#define SLC_CTRL_DIS		0x001
+#define SLC_CTRL_IM		0x040
+#define SLC_CTRL_BUSY		0x100
+#define SLC_CTRL_RGN_OP_INV	0x200
+
 /*
  * By default that variable will fall into .bss section.
  * But .bss section is not relocated and so it will be initilized before
@@ -41,88 +46,115 @@ bool icache_exists __section(".data") = false;
 int slc_line_sz __section(".data");
 bool slc_exists __section(".data") = false;
 bool ioc_exists __section(".data") = false;
+bool pae_exists __section(".data") = false;
 
-static unsigned int __before_slc_op(const int op)
+void read_decode_mmu_bcr(void)
 {
-	unsigned int reg = reg;
+	/* TODO: should we compare mmu version from BCR and from CONFIG? */
+#if (CONFIG_ARC_MMU_VER >= 4)
+	u32 tmp;
 
-	if (op == OP_INV) {
-		/*
-		 * IM is set by default and implies Flush-n-inv
-		 * Clear it here for vanilla inv
-		 */
-		reg = read_aux_reg(ARC_AUX_SLC_CTRL);
-		write_aux_reg(ARC_AUX_SLC_CTRL, reg & ~DC_CTRL_INV_MODE_FLUSH);
-	}
+	tmp = read_aux_reg(ARC_AUX_MMU_BCR);
 
-	return reg;
-}
+	struct bcr_mmu_4 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int ver:8, sasid:1, sz1:4, sz0:4, res:2, pae:1,
+		     n_ways:2, n_entry:2, n_super:2, u_itlb:3, u_dtlb:3;
+#else
+	/*           DTLB      ITLB      JES        JE         JA      */
+	unsigned int u_dtlb:3, u_itlb:3, n_super:2, n_entry:2, n_ways:2,
+		     pae:1, res:2, sz0:4, sz1:4, sasid:1, ver:8;
+#endif /* CONFIG_CPU_BIG_ENDIAN */
+	} *mmu4;
 
-static void __after_slc_op(const int op, unsigned int reg)
-{
-	if (op & OP_FLUSH) {	/* flush / flush-n-inv both wait */
-		/*
-		 * Make sure "busy" bit reports correct status,
-		 * see STAR 9001165532
-		 */
-		read_aux_reg(ARC_AUX_SLC_CTRL);
-		while (read_aux_reg(ARC_AUX_SLC_CTRL) &
-		       DC_CTRL_FLUSH_STATUS)
-			;
-	}
+	mmu4 = (struct bcr_mmu_4 *)&tmp;
 
-	/* Switch back to default Invalidate mode */
-	if (op == OP_INV)
-		write_aux_reg(ARC_AUX_SLC_CTRL, reg | DC_CTRL_INV_MODE_FLUSH);
+	pae_exists = !!mmu4->pae;
+#endif /* (CONFIG_ARC_MMU_VER >= 4) */
 }
 
-static inline void __slc_line_loop(unsigned long paddr, unsigned long sz,
-				   const int op)
+static void __slc_entire_op(const int op)
 {
-	unsigned int aux_cmd;
-	int num_lines;
+	unsigned int ctrl;
+
+	ctrl = read_aux_reg(ARC_AUX_SLC_CTRL);
 
-#define SLC_LINE_MASK	(~(slc_line_sz - 1))
+	if (!(op & OP_FLUSH))		/* i.e. OP_INV */
+		ctrl &= ~SLC_CTRL_IM;	/* clear IM: Disable flush before Inv */
+	else
+		ctrl |= SLC_CTRL_IM;
 
-	aux_cmd = op & OP_INV ? ARC_AUX_SLC_IVDL : ARC_AUX_SLC_FLDL;
+	write_aux_reg(ARC_AUX_SLC_CTRL, ctrl);
 
-	sz += paddr & ~SLC_LINE_MASK;
-	paddr &= SLC_LINE_MASK;
+	if (op & OP_INV)	/* Inv or flush-n-inv use same cmd reg */
+		write_aux_reg(ARC_AUX_SLC_INVALIDATE, 0x1);
+	else
+		write_aux_reg(ARC_AUX_SLC_FLUSH, 0x1);
 
-	num_lines = DIV_ROUND_UP(sz, slc_line_sz);
+	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+	read_aux_reg(ARC_AUX_SLC_CTRL);
 
-	while (num_lines-- > 0) {
-		write_aux_reg(aux_cmd, paddr);
-		paddr += slc_line_sz;
-	}
+	/* Important to wait for flush to complete */
+	while (read_aux_reg(ARC_AUX_SLC_CTRL) & SLC_CTRL_BUSY);
 }
 
-static inline void __slc_entire_op(const int cacheop)
+static void slc_upper_region_init(void)
 {
-	int aux;
-	unsigned int ctrl_reg = __before_slc_op(cacheop);
+	/*
+	 * ARC_AUX_SLC_RGN_END1 and ARC_AUX_SLC_RGN_START1 are always == 0
+	 * as we don't use PAE40.
+	 */
+	write_aux_reg(ARC_AUX_SLC_RGN_END1, 0);
+	write_aux_reg(ARC_AUX_SLC_RGN_START1, 0);
+}
 
-	if (cacheop & OP_INV)	/* Inv or flush-n-inv use same cmd reg */
-		aux = ARC_AUX_SLC_INVALIDATE;
+static void __slc_rgn_op(unsigned long paddr, unsigned long sz, const int op)
+{
+	unsigned int ctrl;
+	unsigned long end;
+
+	/*
+	 * The Region Flush operation is specified by CTRL.RGN_OP[11..9]
+	 *  - b'000 (default) is Flush,
+	 *  - b'001 is Invalidate if CTRL.IM == 0
+	 *  - b'001 is Flush-n-Invalidate if CTRL.IM == 1
+	 */
+	ctrl = read_aux_reg(ARC_AUX_SLC_CTRL);
+
+	/* Don't rely on default value of IM bit */
+	if (!(op & OP_FLUSH))		/* i.e. OP_INV */
+		ctrl &= ~SLC_CTRL_IM;	/* clear IM: Disable flush before Inv */
 	else
-		aux = ARC_AUX_SLC_FLUSH;
+		ctrl |= SLC_CTRL_IM;
 
-	write_aux_reg(aux, 0x1);
+	if (op & OP_INV)
+		ctrl |= SLC_CTRL_RGN_OP_INV;	/* Inv or flush-n-inv */
+	else
+		ctrl &= ~SLC_CTRL_RGN_OP_INV;
 
-	__after_slc_op(cacheop, ctrl_reg);
-}
+	write_aux_reg(ARC_AUX_SLC_CTRL, ctrl);
 
-static inline void __slc_line_op(unsigned long paddr, unsigned long sz,
-				 const int cacheop)
-{
-	unsigned int ctrl_reg = __before_slc_op(cacheop);
-	__slc_line_loop(paddr, sz, cacheop);
-	__after_slc_op(cacheop, ctrl_reg);
+	/*
+	 * Lower bits are ignored, no need to clip
+	 * END needs to be setup before START (latter triggers the operation)
+	 * END can't be same as START, so add (l2_line_sz - 1) to sz
+	 */
+	end = paddr + sz + slc_line_sz - 1;
+
+	/*
+	 * Upper addresses (ARC_AUX_SLC_RGN_END1 and ARC_AUX_SLC_RGN_START1)
+	 * are always == 0 as we don't use PAE40, so we only setup lower ones
+	 * (ARC_AUX_SLC_RGN_END and ARC_AUX_SLC_RGN_START)
+	 */
+	write_aux_reg(ARC_AUX_SLC_RGN_END, end);
+	write_aux_reg(ARC_AUX_SLC_RGN_START, paddr);
+
+	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+	read_aux_reg(ARC_AUX_SLC_CTRL);
+
+	while (read_aux_reg(ARC_AUX_SLC_CTRL) & SLC_CTRL_BUSY);
 }
-#else
-#define __slc_entire_op(cacheop)
-#define __slc_line_op(paddr, sz, cacheop)
-#endif
+#endif /* CONFIG_ISA_ARCV2 */
 
 #ifdef CONFIG_ISA_ARCV2
 static void read_decode_cache_bcr_arcv2(void)
@@ -244,7 +276,17 @@ void cache_init(void)
 		write_aux_reg(ARC_AUX_IO_COH_ENABLE, 1);
 
 	}
-#endif
+
+	read_decode_mmu_bcr();
+
+	/*
+	 * ARC_AUX_SLC_RGN_START1 and ARC_AUX_SLC_RGN_END1 register exist
+	 * only if PAE exists in current HW. So we had to check pae_exist
+	 * before using them.
+	 */
+	if (slc_exists && pae_exists)
+		slc_upper_region_init();
+#endif /* CONFIG_ISA_ARCV2 */
 }
 
 int icache_status(void)
@@ -272,7 +314,6 @@ void icache_disable(void)
 			      IC_CTRL_CACHE_DISABLE);
 }
 
-#ifndef CONFIG_SYS_DCACHE_OFF
 void invalidate_icache_all(void)
 {
 	/* Any write to IC_IVIC register triggers invalidation of entire I$ */
@@ -287,12 +328,12 @@ void invalidate_icache_all(void)
 		__builtin_arc_nop();
 		read_aux_reg(ARC_AUX_IC_CTRL);	/* blocks */
 	}
-}
-#else
-void invalidate_icache_all(void)
-{
-}
+
+#ifdef CONFIG_ISA_ARCV2
+	if (slc_exists)
+		__slc_entire_op(OP_INV);
 #endif
+}
 
 int dcache_status(void)
 {
@@ -419,6 +460,9 @@ static inline void __dc_line_op(unsigned long paddr, unsigned long sz,
 
 void invalidate_dcache_range(unsigned long start, unsigned long end)
 {
+	if (start >= end)
+		return;
+
 #ifdef CONFIG_ISA_ARCV2
 	if (!ioc_exists)
 #endif
@@ -426,12 +470,15 @@ void invalidate_dcache_range(unsigned long start, unsigned long end)
 
 #ifdef CONFIG_ISA_ARCV2
 	if (slc_exists && !ioc_exists)
-		__slc_line_op(start, end - start, OP_INV);
+		__slc_rgn_op(start, end - start, OP_INV);
 #endif
 }
 
 void flush_dcache_range(unsigned long start, unsigned long end)
 {
+	if (start >= end)
+		return;
+
 #ifdef CONFIG_ISA_ARCV2
 	if (!ioc_exists)
 #endif
@@ -439,7 +486,7 @@ void flush_dcache_range(unsigned long start, unsigned long end)
 
 #ifdef CONFIG_ISA_ARCV2
 	if (slc_exists && !ioc_exists)
-		__slc_line_op(start, end - start, OP_FLUSH);
+		__slc_rgn_op(start, end - start, OP_FLUSH);
 #endif
 }