Previous commit has this combined with SOM-LV. This commit has only the Torpedo Device Tree. The device trees were sync'd with 4.9.y stable with two changes: disable mmc2 and stdout-path = &uart1. Both of those two changes will be submitted to the linux-omap list Signed-off-by: Adam Ford <aford173@gmail.com> Changes in V2: Split device tree from other boardmaster
Adam Ford
8 years ago
committed by
Tom Rini
parent
063da122e0
commit
4c8a9f2311
@ -0,0 +1,411 @@ |
||||
/* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 as |
||||
* published by the Free Software Foundation. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
|
||||
#include "omap36xx.dtsi" |
||||
#include "logicpd-torpedo-som.dtsi" |
||||
#include "omap-gpmc-smsc9221.dtsi" |
||||
|
||||
/ { |
||||
model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit"; |
||||
compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; |
||||
|
||||
chosen { |
||||
stdout-path = &uart1; |
||||
}; |
||||
|
||||
gpio_keys { |
||||
compatible = "gpio-keys"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>; |
||||
|
||||
sysboot2 { |
||||
label = "sysboot2"; |
||||
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */ |
||||
linux,code = <BTN_0>; |
||||
wakeup-source; |
||||
}; |
||||
|
||||
sysboot5 { |
||||
label = "sysboot5"; |
||||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */ |
||||
linux,code = <BTN_1>; |
||||
wakeup-source; |
||||
}; |
||||
|
||||
gpio1 { |
||||
label = "gpio1"; |
||||
gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */ |
||||
linux,code = <BTN_2>; |
||||
wakeup-source; |
||||
}; |
||||
|
||||
gpio2 { |
||||
label = "gpio2"; |
||||
gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */ |
||||
linux,code = <BTN_3>; |
||||
wakeup-source; |
||||
}; |
||||
}; |
||||
|
||||
sound { |
||||
compatible = "ti,omap-twl4030"; |
||||
ti,model = "omap3logic"; |
||||
ti,mcbsp = <&mcbsp2>; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&led_pins>; |
||||
|
||||
led1 { |
||||
label = "led1"; |
||||
gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */ |
||||
linux,default-trigger = "cpu0"; |
||||
}; |
||||
|
||||
led2 { |
||||
label = "led2"; |
||||
gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */ |
||||
linux,default-trigger = "none"; |
||||
}; |
||||
}; |
||||
|
||||
pwm10: dmtimer-pwm { |
||||
compatible = "ti,omap-dmtimer-pwm"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pwm_pins>; |
||||
ti,timers = <&timer10>; |
||||
#pwm-cells = <3>; |
||||
}; |
||||
|
||||
}; |
||||
|
||||
&vaux1 { |
||||
regulator-min-microvolt = <3000000>; |
||||
regulator-max-microvolt = <3000000>; |
||||
}; |
||||
|
||||
&vaux4 { |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
}; |
||||
|
||||
&mcbsp2 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&charger { |
||||
ti,bb-uvolt = <3200000>; |
||||
ti,bb-uamp = <150>; |
||||
}; |
||||
|
||||
&gpmc { |
||||
ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ |
||||
1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ |
||||
|
||||
ethernet@gpmc { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&lan9221_pins>; |
||||
interrupt-parent = <&gpio5>; |
||||
interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */ |
||||
reg = <1 0 0xff>; |
||||
}; |
||||
}; |
||||
|
||||
&vpll2 { |
||||
regulator-always-on; |
||||
}; |
||||
|
||||
&dss { |
||||
status = "ok"; |
||||
vdds_dsi-supply = <&vpll2>; |
||||
vdda_video-supply = <&video_reg>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&dss_dpi_pins1>; |
||||
port { |
||||
dpi_out: endpoint { |
||||
remote-endpoint = <&lcd_in>; |
||||
data-lines = <16>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
/ { |
||||
aliases { |
||||
display0 = &lcd0; |
||||
}; |
||||
|
||||
video_reg: video_reg { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&panel_pwr_pins>; |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "fixed-supply"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ |
||||
}; |
||||
|
||||
lcd0: display { |
||||
compatible = "panel-dpi"; |
||||
label = "15"; |
||||
status = "okay"; |
||||
/* default-on; */ |
||||
pinctrl-names = "default"; |
||||
|
||||
port { |
||||
lcd_in: endpoint { |
||||
remote-endpoint = <&dpi_out>; |
||||
}; |
||||
}; |
||||
|
||||
panel-timing { |
||||
clock-frequency = <9000000>; |
||||
hactive = <480>; |
||||
vactive = <272>; |
||||
hfront-porch = <3>; |
||||
hback-porch = <2>; |
||||
hsync-len = <42>; |
||||
vback-porch = <3>; |
||||
vfront-porch = <4>; |
||||
vsync-len = <11>; |
||||
hsync-active = <0>; |
||||
vsync-active = <0>; |
||||
de-active = <1>; |
||||
pixelclk-active = <1>; |
||||
}; |
||||
}; |
||||
|
||||
bl: backlight { |
||||
compatible = "pwm-backlight"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&backlight_pins>; |
||||
pwms = <&pwm10 0 5000000 0>; |
||||
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; |
||||
default-brightness-level = <7>; |
||||
enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ |
||||
}; |
||||
}; |
||||
|
||||
&mmc1 { |
||||
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&mmc1_pins &mmc1_cd>; |
||||
vmmc-supply = <&vmmc1>; |
||||
bus-width = <4>; |
||||
cap-power-off-card; |
||||
}; |
||||
|
||||
&mmc2 { |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
&omap3_pmx_core { |
||||
gpio_key_pins: pinmux_gpio_key_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */ |
||||
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */ |
||||
>; |
||||
}; |
||||
|
||||
pwm_pins: pinmux_pwm_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ |
||||
>; |
||||
}; |
||||
|
||||
led_pins: pinmux_led_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ |
||||
OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */ |
||||
>; |
||||
}; |
||||
|
||||
mmc1_pins: pinmux_mmc1_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
||||
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
||||
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
||||
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
||||
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
||||
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
||||
>; |
||||
}; |
||||
|
||||
tsc2004_pins: pinmux_tsc2004_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ |
||||
>; |
||||
}; |
||||
|
||||
backlight_pins: pinmux_backlight_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ |
||||
>; |
||||
}; |
||||
|
||||
isp_pins: pinmux_isp_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */ |
||||
OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */ |
||||
OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ |
||||
OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ |
||||
|
||||
OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ |
||||
OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ |
||||
OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ |
||||
OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ |
||||
OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ |
||||
OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ |
||||
OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */ |
||||
OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */ |
||||
>; |
||||
}; |
||||
|
||||
panel_pwr_pins: pinmux_panel_pwr_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ |
||||
>; |
||||
}; |
||||
|
||||
dss_dpi_pins1: pinmux_dss_dpi_pins1 { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ |
||||
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ |
||||
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ |
||||
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ |
||||
|
||||
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ |
||||
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ |
||||
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ |
||||
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ |
||||
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ |
||||
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ |
||||
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ |
||||
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ |
||||
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ |
||||
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ |
||||
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */ |
||||
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */ |
||||
|
||||
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */ |
||||
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */ |
||||
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */ |
||||
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */ |
||||
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */ |
||||
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */ |
||||
>; |
||||
}; |
||||
}; |
||||
|
||||
&omap3_pmx_wkup { |
||||
gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup { |
||||
pinctrl-single,pins = < |
||||
OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */ |
||||
OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */ |
||||
>; |
||||
}; |
||||
|
||||
lan9221_pins: pinmux_lan9221_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ |
||||
>; |
||||
}; |
||||
|
||||
mmc1_cd: pinmux_mmc1_cd { |
||||
pinctrl-single,pins = < |
||||
OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */ |
||||
>; |
||||
}; |
||||
}; |
||||
|
||||
&i2c2 { |
||||
mt9p031@48 { |
||||
compatible = "aptina,mt9p031"; |
||||
reg = <0x48>; |
||||
clocks = <&isp 0>; |
||||
vaa-supply = <&vaux4>; |
||||
vdd-supply = <&vaux4>; |
||||
vdd_io-supply = <&vaux4>; |
||||
port { |
||||
mt9p031_out: endpoint { |
||||
input-clock-frequency = <24000000>; |
||||
pixel-clock-frequency = <72000000>; |
||||
remote-endpoint = <&ccdc_ep>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&i2c3 { |
||||
touchscreen: tsc2004@48 { |
||||
compatible = "ti,tsc2004"; |
||||
reg = <0x48>; |
||||
vio-supply = <&vaux1>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&tsc2004_pins>; |
||||
interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */ |
||||
|
||||
touchscreen-fuzz-x = <4>; |
||||
touchscreen-fuzz-y = <7>; |
||||
touchscreen-fuzz-pressure = <2>; |
||||
touchscreen-size-x = <4096>; |
||||
touchscreen-size-y = <4096>; |
||||
touchscreen-max-pressure = <2048>; |
||||
|
||||
ti,x-plate-ohms = <280>; |
||||
ti,esd-recovery-timeout-ms = <8000>; |
||||
}; |
||||
}; |
||||
|
||||
&mcspi1 { |
||||
at25@0 { |
||||
compatible = "atmel,at25"; |
||||
reg = <0>; |
||||
spi-max-frequency = <5000000>; |
||||
spi-cpha; |
||||
spi-cpol; |
||||
|
||||
pagesize = <64>; |
||||
size = <32768>; |
||||
address-width = <16>; |
||||
}; |
||||
}; |
||||
|
||||
&isp { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&isp_pins>; |
||||
ports { |
||||
port@0 { |
||||
reg = <0>; |
||||
ccdc_ep: endpoint { |
||||
remote-endpoint = <&mt9p031_out>; |
||||
bus-width = <8>; |
||||
hsync-active = <1>; |
||||
vsync-active = <1>; |
||||
pclk-sample = <0>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&uart1 { |
||||
interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; |
||||
}; |
||||
|
||||
/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ |
||||
&usb_otg_hs { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&hsusb_otg_pins>; |
||||
interface-type = <0>; |
||||
usb-phy = <&usb2_phy>; |
||||
phys = <&usb2_phy>; |
||||
phy-names = "usb2-phy"; |
||||
mode = <3>; |
||||
power = <50>; |
||||
}; |
||||
@ -0,0 +1,217 @@ |
||||
/* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 as |
||||
* published by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
cpus { |
||||
cpu@0 { |
||||
cpu0-supply = <&vcc>; |
||||
}; |
||||
}; |
||||
|
||||
memory@80000000 { |
||||
device_type = "memory"; |
||||
reg = <0x80000000 0>; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
user0 { |
||||
label = "user0"; |
||||
gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ |
||||
linux,default-trigger = "none"; |
||||
}; |
||||
}; |
||||
|
||||
wl12xx_vmmc: wl12xx_vmmc { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "vwl1271"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
gpio = <&gpio5 29 0>; /* gpio157 */ |
||||
startup-delay-us = <70000>; |
||||
enable-active-high; |
||||
vin-supply = <&vmmc2>; |
||||
}; |
||||
}; |
||||
|
||||
&gpmc { |
||||
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ |
||||
|
||||
nand@0,0 { |
||||
compatible = "ti,omap2-nand"; |
||||
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ |
||||
interrupt-parent = <&gpmc>; |
||||
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
||||
<1 IRQ_TYPE_NONE>; /* termcount */ |
||||
linux,mtd-name = "micron,mt29f4g16abbda3w"; |
||||
nand-bus-width = <16>; |
||||
ti,nand-ecc-opt = "bch8"; |
||||
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ |
||||
gpmc,sync-clk-ps = <0>; |
||||
gpmc,cs-on-ns = <0>; |
||||
gpmc,cs-rd-off-ns = <44>; |
||||
gpmc,cs-wr-off-ns = <44>; |
||||
gpmc,adv-on-ns = <6>; |
||||
gpmc,adv-rd-off-ns = <34>; |
||||
gpmc,adv-wr-off-ns = <44>; |
||||
gpmc,we-off-ns = <40>; |
||||
gpmc,oe-off-ns = <54>; |
||||
gpmc,access-ns = <64>; |
||||
gpmc,rd-cycle-ns = <82>; |
||||
gpmc,wr-cycle-ns = <82>; |
||||
gpmc,wr-access-ns = <40>; |
||||
gpmc,wr-data-mux-bus-ns = <0>; |
||||
gpmc,device-width = <2>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
}; |
||||
}; |
||||
|
||||
&i2c1 { |
||||
clock-frequency = <400000>; |
||||
|
||||
twl: twl@48 { |
||||
reg = <0x48>; |
||||
interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
||||
interrupt-parent = <&intc>; |
||||
twl_audio: audio { |
||||
compatible = "ti,twl4030-audio"; |
||||
codec { |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&i2c2 { |
||||
clock-frequency = <400000>; |
||||
}; |
||||
|
||||
&i2c3 { |
||||
clock-frequency = <400000>; |
||||
at24@50 { |
||||
compatible = "at24,24c02"; |
||||
readonly; |
||||
reg = <0x50>; |
||||
}; |
||||
}; |
||||
|
||||
/* |
||||
* Only found on the wireless SOM. For the SOM without wireless, the pins for |
||||
* MMC3 can be routed with jumpers to the second MMC slot on the devkit and |
||||
* gpio157 is not connected. So this should be OK to keep common for now, |
||||
* probably device tree overlays is the way to go with the various SOM and |
||||
* jumpering combinations for the long run. |
||||
*/ |
||||
&mmc3 { |
||||
interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; |
||||
pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>; |
||||
pinctrl-names = "default"; |
||||
vmmc-supply = <&wl12xx_vmmc>; |
||||
non-removable; |
||||
bus-width = <4>; |
||||
cap-power-off-card; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
wlcore: wlcore@2 { |
||||
compatible = "ti,wl1283"; |
||||
reg = <2>; |
||||
interrupt-parent = <&gpio5>; |
||||
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ |
||||
ref-clock-frequency = <26000000>; |
||||
tcxo-clock-frequency = <26000000>; |
||||
}; |
||||
}; |
||||
|
||||
&omap3_pmx_core { |
||||
mmc3_pins: pinmux_mm3_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ |
||||
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ |
||||
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ |
||||
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ |
||||
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ |
||||
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */ |
||||
>; |
||||
}; |
||||
mcbsp2_pins: pinmux_mcbsp2_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ |
||||
OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ |
||||
OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */ |
||||
OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ |
||||
>; |
||||
}; |
||||
uart2_pins: pinmux_uart2_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ |
||||
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ |
||||
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ |
||||
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ |
||||
OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ |
||||
>; |
||||
}; |
||||
mcspi1_pins: pinmux_mcspi1_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ |
||||
OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ |
||||
OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ |
||||
OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ |
||||
>; |
||||
}; |
||||
hsusb_otg_pins: pinmux_hsusb_otg_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ |
||||
OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ |
||||
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ |
||||
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ |
||||
|
||||
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ |
||||
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ |
||||
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ |
||||
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ |
||||
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ |
||||
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ |
||||
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ |
||||
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ |
||||
>; |
||||
}; |
||||
}; |
||||
|
||||
&uart2 { |
||||
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&uart2_pins>; |
||||
}; |
||||
|
||||
&mcspi1 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&mcspi1_pins>; |
||||
}; |
||||
|
||||
&omap3_pmx_core2 { |
||||
mmc3_core2_pins: pinmux_mmc3_core2_pins { |
||||
pinctrl-single,pins = < |
||||
OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ |
||||
OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ |
||||
>; |
||||
}; |
||||
}; |
||||
|
||||
#include "twl4030.dtsi" |
||||
#include "twl4030_omap3.dtsi" |
||||
|
||||
&twl { |
||||
twl_power: power { |
||||
compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; |
||||
ti,use_poweroff; |
||||
}; |
||||
}; |
||||
|
||||
&twl_gpio { |
||||
ti,use-leds; |
||||
}; |
||||
Loading…
Reference in new issue